List of Articles Finite Element

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Numerical study on the effect of input variations on bulge height in hot tube metal gas forming process
  مهدی چوگان محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluating the impact of length and thread pitch on the stress distribution in dental implants and surrounding bone using finite element method
  مسیح فیروزبخت حامد عجبی نائینی مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - A new plan to connect aluminum tubes of subsurface structures
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Numerical study on the effect of hammering pressure on thickness reduction in hot tube metal gas forming process
  علی طالبی انارکی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Stress intensity factor at the hole-edge cracks tips in a finite plate
  Mohammad Rahim Torshizian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Thermo-mechanical analysis of a coated cylinder head
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Experimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
  Hadi Taghizadeh Tagbakhsh Chakherlou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
  Mahsa Mokhtarian Azam Gasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Thermo-mechanical fatigue simulation of exhaust manifolds
  Hojat Ashori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
  20.1001.1.27834441.2021.13.1.3.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Effect of residual stress in low cycle fatigue for coated exhaust manifold
  Hojjat ashouri
  20.1001.1.27834441.2022.14.2.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Stabilized crack-opening stresses as a function of R-ratios and stress levels
  Rahi Chermahini Majid Jabbari
  20.1001.1.27834441.2022.14.1.6.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Estimation of fatigue lifetime of a cervical disc prosthesis using finite element and experimental investigation of the amount of wear
  Sana Ghafarmoghadam Alireza Seifzadeh Ali Mokhtarian Reza Abedinzadeh
  10.71939/jsme.2024.1092093
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Modified Fixed Grid Finite Element Method to Solve 3D Elasticity Problems of Functionally Graded Materials
  محمد جواد کاظم زاده پارسی فرهنگ دانشمند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - The Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
  احسان براتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - An Initiative Plan of the Equivalent Model for Simulation of theWelding Process
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Prediction of Fatigue Life in Notched Specimens Using Multiaxial Fatigue Criteria
  فیروز اسماعیلی گلدرق سجاد برزگر محمدی علیرضا بابائی امیر افکار
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Analysis of Roll Wear in Reshaping Using Finite Element Simulation
  مهدی سلمانی تهرانی رضا خدابنده شهرکی حسام ولیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Experimental and Numerical Study of Preform Design in Multi Stage Deep Drawing of High Strength Thin Steel Sheet
  اکبر زمانی علیشاه مهدی تاجداری جعفر اسکندری جم جمال صیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Numerical Investigations on the Effect of Pulsating Pressure on Improvement of Formability in Hydroforming of Bent Tube by FEM
  امیر خورسندی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Presentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint
  A.H. Ehsani Ehsani M. Shirzadian Gilan A. Ghafori Sayad A. Shokrgozar Navi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Inverse Identification of Circular Cavity in a 2D Object via Boundary Temperature Measurements Using Artificial Neural Network
  محمد امین احمدفرد محمد جواد کاظم زاده پارسی علیرضا تهور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Study of Aspect Ratio Effect on Mechanical Properties Polymer/NanoComposite
  محمد هاشمی گهروئی حسین گلستانیان مهدی سلمانی تهرانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Low-speed impact behavior of two-layer similar and dissimilar metal laminate structures
  هادی خرّمی شاد محمد باقری توفیقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Axial Crushing Analysis of Sandwich Thin-walled Tubes using Experimental and Finite Element Simulation
  سجاد آذرخش عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Elastic Buckling Analysis of Composite Shells with Elliptical Cross-section under Axial Compression
  منصور درویزه ابوالفضل درویزه رضا انصاری الهام کاظمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Study of the Effects of Lacing Rods Location on Natural Frequencies in Last Stage Blades of a Steam Turbine
  مهدی نوذرپور عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - A Roll Wear Prediction Model in Hot Plate Rolling
  امیر نورانی محمود سلیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Propagation of Crack in Linear Elastic Materials with Considering Crack Path Correction Factor
  مهران مرادی مهدی پورمحمود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Nonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties
  مهرنوش دمیرچلی محمد آزادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - A Comparative Study Between Analytical, Finite Element Method andthe Experimental Results in Wire Drawing of Copper
  محمد احمدپور حسن خادمی‌زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Numerical and Experimental Analysis of Forming Rectangular Copper Pipes by Successive Rolling of Round Pipe Filled With Bismuth
  علی بصیرت نیا محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Optimization of Axisymmetric Extrusion Die Profiles
  حسن نحوی مهدی حسن زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Static and Dynamic Analysis of Bus Structure and Chassis of O-457
  ابوالفضل محبوبی شاد محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Numerical Study on Effect of Bilinear Pressure Path on Corner Filling in Hydroforming of Tube in Box-Shape Die
  محسن لوح موسوی میثم شهبازی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Numerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear
  سعید بهشتیان مسگران محمد علی صادقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Analysis of Fatigue Cracks of Diesel Engines Cylinder Heads using a Two-Layer Viscoplasticity Model and Considering Viscousity Effects
  حجت عاشوری بابک بهشتی محمد رضا ابراهیم زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Numerical Simulation of Impact of Low Velocity Projectiles With Water Surface
  نجمه خضرائیان ناصر دشتیان گرامی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Experimental Study of the Voltage and Number of the Coil Rounds in Electromagnetic Forming Process of the V shape Aluminum sheets
  سجاد نادیان برسیانی احمد کشاورزی امین کلاه دوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Design and structural analysis of buckling and prestressed modal of an isogrid conical shell under mechanical and thermal loads
  Behrooz Shahriari Mahdi Sharifi Hassan Izanlo
  DOI 10.71939/jsme.2024.1105736