• فهرس المقالات Configuration

      • حرية الوصول المقاله

        1 - بهره برداری چندهدفه شبکه توزیع دربرگیرنده توربین بادی با لحاظ نمودن کمینه¬سازی آلایندگی زیست محیطی در شبکه
        رضا صداقتی
        مقدمه: رشد روز افزون بار‌های مصرفی و ضرورت تأمین مناسب، به موقع و با قابلیت اطمینان شبکه‌های برق، ضرورت نگرش مجدد در بهره‌برداری بهینه از سیستم‌ها و خطوط برق را بیش از پیش ایجاب می‌نماید. از طرفی، در سال‌های اخیر حمایت‌های زیادی از منابع تولیدات پراکنده مبتنی بر انرژی‌ه أکثر
        مقدمه: رشد روز افزون بار‌های مصرفی و ضرورت تأمین مناسب، به موقع و با قابلیت اطمینان شبکه‌های برق، ضرورت نگرش مجدد در بهره‌برداری بهینه از سیستم‌ها و خطوط برق را بیش از پیش ایجاب می‌نماید. از طرفی، در سال‌های اخیر حمایت‌های زیادی از منابع تولیدات پراکنده مبتنی بر انرژی‌های نو خصوصاً توربین‌های بادی صورت گرفته است. یکی از عمده مسأله‌های توربین‌های بادی مسأله نوسانات شدید باد و وابستگی توان خروجی به سرعت باد می‌باشد. به موازات این مشکل، در بحث مدیریت شبکه، خطای ناشی از پیش‌بینی بار مصرفی در آینده نیز می‌تواند به هرچه سخت‌تر شدن صورت مسأله بیانجامد. یکی از تکنیک‌های مناسب بدون هزینه‌گذاری اولیه، روش تجدید ساختار و توپولوژی شبکه با هدف بهبود وضع شبکه است. مواد و روش‌ها: در این تحقیق جهت بررسی مسأله تجدید ساختار و توپولوژی شبکه توزیع با حضور منابع توربین بادی به ارائه روشی نوین جهت مدیریت همزمان آن‌ها پرداخته شده است. یک تابع چند هدفه جهت دستیابی به کاهش تلفات اکتیو شبکه، کاهش هزینه‌های کلی شبکه، بهبود پروفیل ولتاژ باس‌های موجود، و کاهش میران آلایندگی کل تولیدی توسط شبکه در نظر گرفته شده که به¬منظور کمینه نمودن آن از الگوریتم بهینه‌سازی کرم شب تاب بهره گرفته شده است. نتایج و بحث: حل مسأله تجدید ساختار با در نظر گرفتن عدم قطعیت ناشی از توربین‌های بادی لحاظ شده است. حضور منابع بادی در شبکه توانسته توابع هدف را به مقدار قابل توجهی کاهش دهد. نتیجه‌گیری: به منظور ارزیابی روش پیشنهادی شبیه‌سازی‌هایی روی شبکه 32 باسه IEEE صورت گرفته که حاکی از اثرپذیری الگوریتم در نظر گرفته شده در قیاس با سایر الگوریتم‌های بهینه‌سازی خواهد بود. ساختار پیشنهادی دارای قدرت مناسبی جهت در نظر عدم قطعیت متغیر‌های تصادفی مسأله بوده بطوری که مقدار انحراف استاندارد هر یک از توابع هدف بعد از بهینه‌سازی کاهش یافته و در حقیقت میزان اطمینان پاسخ‌های یافت شده افزایش یافته است. تفاصيل المقالة
      • حرية الوصول المقاله

        2 - طراحی جامع شبکه های روشنایی معابر در سیستمهای توزیع با رویکرد بهینه سازی
        علی محمدی سیدعلی حسینی
        طراحی شبکه های روشنایی معابر در شرکت های توزیع برق بدلیل دو جنبه رعایت الزامات فنی محاسبات روشنایی معابر و تحلیل های الکتریکی و نیاز به تحلیل اقتصادی و مقرون به صرفه بودن از سوی دیگر همواره با چالش های خاص خود همراه بوده است و با تهیه طرح های سنتی در بخش های فنی متفاوت أکثر
        طراحی شبکه های روشنایی معابر در شرکت های توزیع برق بدلیل دو جنبه رعایت الزامات فنی محاسبات روشنایی معابر و تحلیل های الکتریکی و نیاز به تحلیل اقتصادی و مقرون به صرفه بودن از سوی دیگر همواره با چالش های خاص خود همراه بوده است و با تهیه طرح های سنتی در بخش های فنی متفاوت تلقی می شود. مهمترین دلیل این پیچیدگی عدم دسترسی به جداول طراحی بهینه با در نظر گرفتن تمامی پارامترهای طراحی مربوط به روشنایی و بخش الکتریکی با رعایت استانداردهای لازم است به طوری که در حال حاضر هر پروژه روشنایی باید دارای مطالعه مستقل و مطالعه موردی باشد. در این مطالعه شرایط واقعی شبکه های روشنایی معابر از جمله نوع شبکه، هادی ها و ... در نظر گرفته شده است که باید با واقعیت صنعت برق مطابقت داشته باشد و صرفاً آکادمیک صرف نباشد. با شبیه سازی در نرم افزار Dialux evo و DIGSilent Power Factory جداول طراحی بهینه جامع با توجه به نوع چراغ، هادی شبکه، ساختار شبکه، حداکثر طول شبکه های روشنایی معابر و حداقل ظرفیت ترانسفورماتور و در نتیجه محدوده کیفیت ولتاژ استاندارد و بارگذاری مجاز پست های توزیع استخراج می گردد. این جداول می تواند به طراحان و در سطح بالا به تصمیم گیرندگان در موضوعات فنی مرتبط با روشنایی معابر کمک کند. تفاصيل المقالة
      • حرية الوصول المقاله

        3 - The structural properties of boron and nitrogen adsorption on benzene molecule: a density functional study
        Samaneh S. Hoseini Edris Faizabadi
        AbstractThe structural properties of boron and nitrogen atoms added on benzene (Bz) molecule are studied using density functional theory within Gaussian 03 program package. The adsorption energy, HOMO–LUMO energy gap (ΔH–L) and also the optimized bond lengths (C–C and C أکثر
        AbstractThe structural properties of boron and nitrogen atoms added on benzene (Bz) molecule are studied using density functional theory within Gaussian 03 program package. The adsorption energy, HOMO–LUMO energy gap (ΔH–L) and also the optimized bond lengths (C–C and C–H bond lengths) of the structures are evaluated. In this work, three adsorption sites for both boron and nitrogen were selected, hollow site (H), middle site (M) and top site (T), as their initial positions. It is found that for boron adsorption on Bz molecule, the relaxed middle site configuration has the most stable geometry, while in NBz, we obtained similar positions after optimization process. We have also illustrated that the relaxed NBz positions are in higher stability than the relaxed BBz positions. As a consequence, it is found that the stability of an isolated benzene molecule increases by adding boron or nitrogen on top of it. تفاصيل المقالة
      • حرية الوصول المقاله

        4 - کاهش آسیب پذیری در برابر زلزله در عرصه طراحی معماری با رویکرد طراحی لرزه ای مبتنی بر کارایی
        حمیدرضا موسوی
        تمرکز بر مهندسی سازه برای پایداری بنا، به کاهش تلفات جانی انجامیده است اما به واسطه افزایش هزینهها نتوانستهرضایت گروه های ذینفع را فراهم آورد.طرحریزی ساختمان از سیاستگذاریهای کلان آغاز و در قالب برنامههای فرادست چارچوب طرح و ایستایی بنا راپایهریزی مینماید. در این فرآیند أکثر
        تمرکز بر مهندسی سازه برای پایداری بنا، به کاهش تلفات جانی انجامیده است اما به واسطه افزایش هزینهها نتوانستهرضایت گروه های ذینفع را فراهم آورد.طرحریزی ساختمان از سیاستگذاریهای کلان آغاز و در قالب برنامههای فرادست چارچوب طرح و ایستایی بنا راپایهریزی مینماید. در این فرآیند معمار پیکربندی بنا که مهمترین تأثیر را بر روی عملکرد لرزهای آن دارد، مشخصمیکند.آسیبشناسی صنعت ساختمان در طراحی معماری نشان میدهد که اسناد نظام فنی و اجرایی کشور واجد مشکلاتزیر است:1ـ فقدان اسناد جامع و کارآمد در حوزه طراحی معماری2ـ تکیه بر اسناد تجویزی متضاد با ماهیت خلاقانه معماریماهیت روش طراحی لرزهای مبتنی بر کارایی (PBSD (بیشترین انطباق را با طراحی معماری و پاسخگویی به مسائلگروههای ذینفع دارد. در این راستا مقاله به شناسایی مؤلفههای مشترک روش طراحی لرزهای مبتنی بر کارایی و طراحیمعماری و روشهای دستیابی به اسناد و تبیین نقش معماران میپردازد. تفاصيل المقالة
      • حرية الوصول المقاله

        5 - Early Islamic Architecture and Structural Configurations
        Kubilay Kaptan
        Islam spread rapidly after its founding, encompassing much of North Africa, the Middle East, andSoutheast Asia. The art of this vast region draws its distinctive character both from Islam itself and from the diverse cultural traditions of the world’s Muslims. Beca أکثر
        Islam spread rapidly after its founding, encompassing much of North Africa, the Middle East, andSoutheast Asia. The art of this vast region draws its distinctive character both from Islam itself and from the diverse cultural traditions of the world’s Muslims. Because Islam discouraged the use of figurative images, particularly inreligious contexts- unlike Christian art- Islamic artists developed a rich vocabulary of aniconic, or nonfigural, ornamentthat is a hallmark of Islamic work. This vocabulary includes complex geometric patterns and the scrolling vinesknown outside the Islamic world as arabesques. Figural representation, to the extent it was permitted which variedfrom time to time and place to place, first developed most prominently in regions with strong pre-Islamic figuraltraditions, such as those that had been under the control of the Roman and Byzantine empires. Stylized forms forrepresenting animals and plants developed in the regions that had been under the control of the Sassanian dynasty ofPersia (modern Iran), the heirs of the artistic traditions of the ancient Near East, who ruled from 226 to 641. Becausethe Arabian birthplace of Islam had little art, these Persian and Roman Byzantine influences shaped Islamic art in itsformative centuries.The elements of early early Islamic architecture were formed to respond effectively to people’s physical, environmental,social, physiological and religious requirements at their time. The research demonstrates that architects used tocopy-paste various elements of the Islamic historical buildings in their design work without understanding the meaningsand values that it holds. Such approach would only transfer the element’s form though strips it from its historicalcontext and values. The paper argues that architect should comprehend not only the hidden values of the historicalelements only but also how values interacted and are integrated into these elements. By doing so, the architect wouldbe able to correctly perceive and read these elements thus incorporate it successfully in his/ her design. This articlegives perspective of early Islamic architecture and structural configurations of the related era. تفاصيل المقالة
      • حرية الوصول المقاله

        6 - شناسایی مؤلفه‌های سازمان‌های مُبلغ (مأموریت‌محور) در دانشگاه علوم پزشکی تهران
        اکبر بیات مرتضی مرادی
        مقدمه: وقتی‌که ایدئولوژی سازمانی یک سازمان، بسیار قوی شود، می‌تواند تمامی ساختار را تحت تأثیر خود قرار دهد؛ و در نهایت ساختاری به وجود می‌آید که آن را ساختار مُبلغ (ماموریت محور) می‌گوید. لذا پژوهش حاضر، باهدف شناسایی مؤلفه‌های سازمان‌های مُبلغ انجام‌شده است. روش پژوهش أکثر
        مقدمه: وقتی‌که ایدئولوژی سازمانی یک سازمان، بسیار قوی شود، می‌تواند تمامی ساختار را تحت تأثیر خود قرار دهد؛ و در نهایت ساختاری به وجود می‌آید که آن را ساختار مُبلغ (ماموریت محور) می‌گوید. لذا پژوهش حاضر، باهدف شناسایی مؤلفه‌های سازمان‌های مُبلغ انجام‌شده است. روش پژوهش: به‌منظور رسیدن به این هدف، در مرحله کیفی ضمن بررسی ادبیات موضوع با روش تحلیل مضمون و مصاحبه‌های نیمه عمیق از 15 نفر خبرگان که اساتید و مدیران دانشگاه علوم پزشگی تهران بودند با روش نمونه گیری غیر تصادفی هدفمند انتخاب شدند؛ برای سنجش روایی مضامین و اعتبار سنجی، از طریق زاویه بندی داده و برای محاسبه پایایی از روش هولستی که با ضریب 98/0 تأیید شدند. و با استفاده از نرم‌افزار مکس‌کیودا شماره 12، معیارهای مؤثر بر سازمان‌های مبلغ شناسایی شد. یافته‌ها: تجزیه ‌و تحلیل داده‌های کیفی، منجر به شکل‌گیری پنجاه و یک مضمون پایه و یازده مضمون سازمان دهنده و سه مضمون فراگیر شامل مؤلفه‌های پیکربندی، مؤلفه‌های محتوایی و مؤلفه‌های ساختاری شد. نتیجه‌گیری: نتایج نشان دادند که معیار ایدئولوژی سازمانی جزء معیارهای اساسی و بازیکنان کلیدی است که در سازمان‌های مُبلغ وجودش ضروری است و باید مورد توجه قرار گیرد. تفاصيل المقالة
      • حرية الوصول المقاله

        7 - Investigation of relationship with electron configuration of chemical hardness, absolute electronegativity and electrophilicity
        Savas, Kaya Cemal Kaya
        Chemical hardness (), absolute electronegativity (), and electrophilicity () have importantapplications in inorganic chemistry. These concepts are defined quantitatively as � � �� � ����,� � �� � ����, � � ������Where I is the ionization energy and A is the electron أکثر
        Chemical hardness (), absolute electronegativity (), and electrophilicity () have importantapplications in inorganic chemistry. These concepts are defined quantitatively as � � �� � ����,� � �� � ����, � � ������Where I is the ionization energy and A is the electron affinity. In thisstudy, graphical method was used to see the relation of electron configuration with chemicalhardness, absolute electronegativity and electrophilicity. For this purpose, sequential ionization ofatoms were considered. In this method, chemical hardness, absolute electronegativity, electrophilicityand effective nuclear charge (Z*) were calculated for all ions formed with sequential ionization of anatom and chemical hardness, absolute electronegativity and electrophilicity with respect to effectivenuclear charge were illustrated in the graphs. Besides, the same charged ions were considered inorder to see more clearly relationship with electron configuration of these three features becausecharge is effective on chemical hardness, absolute electronegativity and electrophilicity. Likewise,chemical hardness, absolute electronegativity and electrophilicity values were calculated and graphsof these three features were plotted with respect to atomic number (Z). As to conclude, it was proventhat chemical hardness, absolute electronegativity and electrophilicity increase in some specificelectron configurations and this means that configuration effect is a more effective factor than radiusand charge. تفاصيل المقالة
      • حرية الوصول المقاله

        8 - Density Functional Study on Stability and Structural Properties of Cu n clusters
        Sepideh Ketabi Giti Ghasemi
        In this research DFT/B3LYP method has been employed to investigate the geometrical structures,relative stabilities, and electronic properties of Cun (n=310) clusters for clarifying the effect of sizeon the properties. Through a careful analysis of the successive binding أکثر
        In this research DFT/B3LYP method has been employed to investigate the geometrical structures,relative stabilities, and electronic properties of Cun (n=310) clusters for clarifying the effect of sizeon the properties. Through a careful analysis of the successive binding energies, second-orderdifference of energy and the highest occupied-lowest unoccupied molecular orbital energy gaps as afunction of cluster size, an odd-even alternative phenomenon has been observed. The results showthat the clusters with even number of copper atoms present relatively higher stabilities. تفاصيل المقالة
      • حرية الوصول المقاله

        9 - A quantum-mechanical investigation of functional group effect on 5,5'-disubstituted-1,1'-azobis(tetrazoles)
        Mehdi Nabati
        The present work reports the detailed B3LYP/6-311++G(d,p) study of most stable transand cisconfigurations photoisomerization in the core system of computational photochemistry-the 5,5'-disubstituted-1,1'-azobis (tetrazole) molecules. All computations were carried out in أکثر
        The present work reports the detailed B3LYP/6-311++G(d,p) study of most stable transand cisconfigurations photoisomerization in the core system of computational photochemistry-the 5,5'-disubstituted-1,1'-azobis (tetrazole) molecules. All computations were carried out in gas phase attemperature 293.15 K and pressure 1 atm. Firstly; the potential energy surface (PES) of the groundstate of the molecules has been directly optimized and scanned using a multistate multiconfigurationsecond-order perturbation theory. We characterize the cis and trans molecules geometric domains ofthe ground states. The imaginary frequencies were not shown in frequency computation analysis ofthe optimized molecules. Also we calculate the electronic and thermal energy, polarizability,equilibrium constant, HOMO-LUMO energies gap and chemical hardness of the configurations in theground state. In general, the DFT results confirm the stability of the trans configurations among allstructures. In the last section of this study, the detonation parameters of the compounds are calculated. تفاصيل المقالة
      • حرية الوصول المقاله

        10 - بهینه سازی چند هدفه شاکله پنجره به منظور تامین هم زمان مولفه های آسایش بصری و کارایی انرژی از طریق الگوریتم ژنتیک ( نمونه موردی: کلاس درس ابتدایی در تهران- ایران)
        مجید مفیدی شمیرانی فیروزه محمدی
        حرکت به سوی ساختمان‌های پایدار نیازمند آن است تا تأکید بیشتری بر ارزیابی دقیق عملکرد نور روز و انرژی شود. این امر به خصوص در مورد ساختمان‌های آموزشی دارای اهمیت ویژه است، چرا که تامین میزان نور کافی هم‌زمان با ممانعت از ایجاد خیرگی و نیز کاهش مصرف انرژی در این فضاها چال أکثر
        حرکت به سوی ساختمان‌های پایدار نیازمند آن است تا تأکید بیشتری بر ارزیابی دقیق عملکرد نور روز و انرژی شود. این امر به خصوص در مورد ساختمان‌های آموزشی دارای اهمیت ویژه است، چرا که تامین میزان نور کافی هم‌زمان با ممانعت از ایجاد خیرگی و نیز کاهش مصرف انرژی در این فضاها چالش بزرگی محسوب می‌شود. در این مقاله به منظور تامین هم زمان مولفه های آسایش بصری( افزایش روشنایی و کاهش خیرگی) و کارایی انرژی( کاهش مصرف انرژی) در ساختمان‌های آموزشی(کلاس درس مدارس ابتدایی) شهر تهران یک کلاس درس به عنوان مدل پایه مدلسازی پارامتریک شد و شبیه سازی پویای عملکرد نور روز و انرژی بر روی آن انجام گرفت. سپس جهت دستیابی به مقادیر بهینه پارامترهای طراحی پنجره فرآیند بهینه سازی مبتنی بر شبیه سازی از طریق الگوریتم ژنتیک و به صورت اتوماتیک در نرم افزار گرسهاپر بصورت چند هدفه صورت گرفت. نتایج حاصل، لزوم تعدیل شرایط با اولویت وزنی به عملکرد نور روز را نشان می دهند. بهترین راه حل پارتو بر اساس کمترین فاصله تا بهینه جهانی عملکرد بهتری را نسبت به مدل پایه نشان می دهد که میزان بهبود شاخص های UDI،DGP وEUI به ترتیب11، 15و 22 درصد است. تفاصيل المقالة
      • حرية الوصول المقاله

        11 - طراحی و مدل‌سازی آنتن‌های RFID تزویج شدة القایی
        زهرا عارف دارابی سیما هنرمند
        برچسب های شناسایی رادیویی، روش شناسایی منحصر به فرد اشیاء با استفاده از امواج رادیویی است. با استفاده از این فن آوری می توان بدون دخالت انسان اطلاعات مربوط به تولید، مکان، زمان و مبادلات کالا را جمع آوری نمود. این سیستم از سه بخش برچسب، برچسب خوان و کامپیوتر میزبان تشکی أکثر
        برچسب های شناسایی رادیویی، روش شناسایی منحصر به فرد اشیاء با استفاده از امواج رادیویی است. با استفاده از این فن آوری می توان بدون دخالت انسان اطلاعات مربوط به تولید، مکان، زمان و مبادلات کالا را جمع آوری نمود. این سیستم از سه بخش برچسب، برچسب خوان و کامپیوتر میزبان تشکیل شده و هدف آنتن در برچسب های شناسایی رادیویی، تزویج ریزتراشه با میدان مغناطیسی تولید شده به وسیلة آنتن برچسب خوان است. در این مقاله، آنتن های تزویج شدة القایی مربوط به برچسب های شناسایی رادیویی در دو ساختار متفاوت قوسی شکل و پیکربندی بدنة دولایه طراحی و مدلسازی می شود که مقاومت ورودی بالای این ساختارها، باعث تطبیق امپدانس بعضی تراشه های برچسب در فرکانس 915MHz خواهد شد. تفاصيل المقالة
      • حرية الوصول المقاله

        12 - مطالعات محاسباتی مبتنی بر DFT بر روی پیکربندی های مولکولی داروی آزاسیتیدین
        ابوالقاسم شاملی سمیرا ناصری
        در این تحقیق به بررسی و مطالعه خواص ساختاری ترکیب آزا سیتیدین به عنوان یک دارو برای درمان سندرم میلو دیس پلاستیک با استفاده از روش های محاسباتی بر مبنای مکانیک کوانتوم پرداخته شده است. تجزیه و تحلیل 3 پیکربندی مولکول آزا سیتیدین با محاسبات نظریه تابعی چگال و در سطح محاس أکثر
        در این تحقیق به بررسی و مطالعه خواص ساختاری ترکیب آزا سیتیدین به عنوان یک دارو برای درمان سندرم میلو دیس پلاستیک با استفاده از روش های محاسباتی بر مبنای مکانیک کوانتوم پرداخته شده است. تجزیه و تحلیل 3 پیکربندی مولکول آزا سیتیدین با محاسبات نظریه تابعی چگال و در سطح محاسباتی B3LYP و با تابع پایه 6-311G/dp+ به طور کامل مورد بررسی قرار گرفته است. برای این منظور از آنالیز های متعدی برای بررسی ساختار، از جمله بهینه سازی ترکیبات ، محاسبه های طیف مرئی فرابنفش (UV‒Vis) به وسیله ی محاسبه های وابسته به زمان DFT (TD–DFT) انجام شد. تفاصيل المقالة
      • حرية الوصول المقاله

        13 - Benzofurans nor-sesquiterpenoids from <i>Petasites hybridus</i> rhizomes and absolute configuration by circular dichroism
        Hanieh Asadi Samad Nejad Ebrahimi Marzieh Omrani Hassan Esmaeili
        Petasites hybridus (L.) G.Gaertn., B.Mey. &amp; Scherb. has been used as a medicine for different illnesses. A phytochemical study on hexane extract has been carried out using normal phase silica gel column and RP-HPLC chromatography. Five sesquiterpenoids were isolated أکثر
        Petasites hybridus (L.) G.Gaertn., B.Mey. &amp; Scherb. has been used as a medicine for different illnesses. A phytochemical study on hexane extract has been carried out using normal phase silica gel column and RP-HPLC chromatography. Five sesquiterpenoids were isolated, purified, and identified from hexane extract. The structures were elucidated by applying extensive 1D and 2D NMR and HRESI-TOFMS spectroscopy. In addition, circular dichroism (CD) spectra were applied to determine absolute configurations of constituents. Two never described benzofuran nor-sesquiterpenes (2S,3S)-5'-acetyl-(Z)-3-(acetoxymethyl) but-2-enoate tremetone) (4) and (2R,3R)-5'-acetyl-(Z)-3-(acetoxymethyl) but-2-enoate-7-hydroxytremetone (5) as well as euparin (1), (2S,3R)-3,6-dihydroxytremetone (2), and (2S,3S)-3,6-dihydroxytremetone (3) were isolated from the rhizome of Petasites hybridus, a species in Flora of Iran. Also, the euparin content of the MeOH extracts of seven populations of Iran was measured by HPLC-PDA. Notably, isolated euparin was the main constituent of Iranian P. hybridus varying between 2.7 and 9.7 &micro;g/mg among samples. تفاصيل المقالة
      • حرية الوصول المقاله

        14 - Market-based Method for Reconfiguration of Distribution Networks Using Mine Blast Algorithm (MBA)
        Sajjad Niroomand Alireza Bakhshinejad Mehdi Tabasi
        Today, reduction of losses and operational costs is considered an important issue in power systems. Demand response program causes diminished consumption during peak hours and thus increased reliability and reduced costs. Reconfiguration of distribution networks are amo أکثر
        Today, reduction of losses and operational costs is considered an important issue in power systems. Demand response program causes diminished consumption during peak hours and thus increased reliability and reduced costs. Reconfiguration of distribution networks are among the practical methods in reducing losses and costs as well as improving the voltage profile. In this paper, the reconfiguration of distribution networks is performed considering demand response potential and in the presence of distribution generated (DG) sources using a new optimization algorithm called mine blast optimization algorithm (MBA). For this purpose, reducing losses, improving voltage profile, and lowering operational costs of the network are also taken into account as objective function. The proposed method is applied on 33-bus radial network. Simulation has been performed using MATLAB software. تفاصيل المقالة
      • حرية الوصول المقاله

        15 - تحلیل عوامل پیکربندی فضایی مؤثر بر قابلیت بازدیدپذیری اماکن تاریخی (نمونه مطالعه: مسجد عتیق قزوین و بافت پیرامون)
        حسنا ورمقانی
        اماکن و حوزه‌های تاریخی به‌مثابه نشانه‌های شهری از قابلیت‌های متعدد در برنامه‌ریزی و توسعه محیط شهری برخوردارند. ازآن‌جمله، آگاهی از نحوه اثرگذاری اجزای پیکربندی فضایی بر قابلیت بازدید و استفاده از آن‌هاست که نقش مؤثری در تدوین راهبردهای گردشگری شهری در مسیرهای منتهی به أکثر
        اماکن و حوزه‌های تاریخی به‌مثابه نشانه‌های شهری از قابلیت‌های متعدد در برنامه‌ریزی و توسعه محیط شهری برخوردارند. ازآن‌جمله، آگاهی از نحوه اثرگذاری اجزای پیکربندی فضایی بر قابلیت بازدید و استفاده از آن‌هاست که نقش مؤثری در تدوین راهبردهای گردشگری شهری در مسیرهای منتهی به اماکن تاریخی خواهد داشت. در مقاله حاضر به‌کمک روش توصیفی تحلیلی ازطریق تمرکز بر ابعاد کالبدی مؤثر بر امکان بازدید از مکان‌های تاریخی توسط گردشگر، مؤلفه‌های اثرگذار تدوین شده و سپس با روش استدلال منطقی، اعتبار شاخص‌ها در بازدیدپذیری محدوده بافت تاریخی موردتحلیل قرار می‌گیرد. هدف تحقیق ارزیابی عوامل پیکربندی فضایی مؤثر بر قابلیت بازدیدپذیری مسجدجامع عتیق شهر قزوین ازطریق مطالعه کالبد بنا و محدوده بافت پیرامون است. سؤال تحقیق آن است که کدام رویکردهای کالبدی در افزایش بازدیدپذیری بافت‌های تاریخی و ابنیه شاخص موجود در آن نقش دارد. مؤلفه‌های بازدیدپذیری در بافت تاریخی شهر قزوین در محدوده مطالعه چگونه ارزیابی می‌شود. ابزار تحلیل نرم‌افزار تخصصی نحو فضا و نیز تکیه بر مشاهدات و برداشت‌های میدانی است. نتایج نشان می‌دهد موقعیت استقرار ابنیه شاخص درون بافت تاریخی بیش‌ترین اثرگذاری را بر امکان و قابلیت بازدید خواهد داشت و ازسوی دیگر در مقیاس معماری، عناصر طبیعی و مصنوع موجود در کالبد بنا، مبلمان فضا و تناسبات ارتفاعی بر کشش و جاذبه بصری/ حرکتی و حضور و هدایت ناظر به سمت مقاصد معین اثرگذاری بیشتری دارد. همچنین گستردگی فضا نسبت به توده در مکان استقرار عناصر نشانه به‌دلیل تأثیر بر شاخص تردد فضایی و حدود رؤیت‌پذیری، امکان هدایت ناظر در مسیرهای منتهی به آن‌ها و احتمال بازدید ناظران را افزایش می‌دهد. تفاصيل المقالة
      • حرية الوصول المقاله

        16 - A learning automaton-based approach for power loss minimization and voltage profile enhancement in large-scale distribution systems
        Mohammad Bagher Moradi Siamak Najjar Karimi amir hossin jalali
        The reconfiguration problem consists of finding a new network topology with minimal power losses, while all the system constraints such as radial structure, lines power flow below capacity limits, node voltage magnitude within limits and all nodes connected are satisfie أکثر
        The reconfiguration problem consists of finding a new network topology with minimal power losses, while all the system constraints such as radial structure, lines power flow below capacity limits, node voltage magnitude within limits and all nodes connected are satisfied. This is a combinational optimization problem where the aim is to specify the final status of all switches (open/closed,) in a large-scale distribution system. Although there are a plenty of methods in the literature, but comprehensive analysis of bus and line failure has not been accomplished and just a limited version of failure has been studied. This paper presents a learning automaton-based algorithm for reconfiguration of large-scale distribution systems with assumption of probabilistic failure in both of the buses and lines. The main objective of the proposed algorithm is to minimize the power loss and voltage deviation, and also to maintain the distribution system in radial structure. To demonstrate the applicability of the proposed algorithm, it is tested on two standard IEEE sample systems and the obtained results are compared with other methods. Also, the numerical result indicates that the proposed method supplying power to the non-faulted areas with minimal power loss and maintains the radial structure of distribution system under abnormal conditions. تفاصيل المقالة
      • حرية الوصول المقاله

        17 - Raising Power Quality and Improving Reliability by Distribution Network Reconfiguration in the Presence of Renewable Energy Sources
        Mohamad Taghi Babajani BaghmisheZad Hosein NasirAghdam
        In this paper, reconfiguration problem of distribution network has been investigated toimprove reliability and reduce power loss by placement of renewable energy sources; i.e. solarcell and wind turbine. For this, four reliability indices are considered in objective fun أکثر
        In this paper, reconfiguration problem of distribution network has been investigated toimprove reliability and reduce power loss by placement of renewable energy sources; i.e. solarcell and wind turbine. For this, four reliability indices are considered in objective function;which are as follows: System Average Interruption Frequency Index (SAIFI), System AverageInterruption Duration Index (SAIDI), Cost of Energy Not Supplied (CENS), and MomentaryAverage Interruption Frequency Index (MAIFI). By using a novel technique, the target functionwas normalized. Simulation has been performed on IEEE 69-bus test system. A genetic algorithmcould solve this nonlinear problem. تفاصيل المقالة
      • حرية الوصول المقاله

        18 - Social Logic of Cities and Urban Tourism Accessibility; Space Syntax Analysis of Kuala Lumpur City Centre
        Hossein Safari Sajjad Nazidizaji Fataneh FakouriMoridani
        Tourism is a progressively major part of economies of urban areas. Urban regeneration as a subcategory of urban tourism has been the center of many urban projects. This study addresses the role of space syntax theory as an analytical tool and design aided tool in urban أکثر
        Tourism is a progressively major part of economies of urban areas. Urban regeneration as a subcategory of urban tourism has been the center of many urban projects. This study addresses the role of space syntax theory as an analytical tool and design aided tool in urban regeneration. For this purpose, we examined the development of a square in the Kuala Lumpur City Center (KLCC) using space syntax method. Surrounding streets network one time with existed situation and another time with adding proposed square were analyzed by Depthmap software and were compared. Numerical analysis showed a significant increase of integration of the most number of streets. Based on the connection of integration and other concepts of space syntax in accessibility and people flow the proposed square can be a major contribution to accessibility problems of tourists in KLCC. It can be seen that the synergy of the streets that link Jalan Ampang is increased; moreover, intelligibility and accessibly may well be improved in this area by the suggested square. The behavior of tourists and local people based on wayfinding can be developed by new spatial configurations. تفاصيل المقالة
      • حرية الوصول المقاله

        19 - Analyzing the‏ Impact‏ of the Physical Form of‏ Neighborhoods‏ on‏ Walkability
        Maryam Mohamadi Mahsa Mostafaei
        Physical health influences the wide area such as: urban design, physical activities, walking behavior) and generally needs accurate laboratory methods and tools to assess. A large number of studies considered walking behavior as one of the aspects of physic أکثر
        Physical health influences the wide area such as: urban design, physical activities, walking behavior) and generally needs accurate laboratory methods and tools to assess. A large number of studies considered walking behavior as one of the aspects of physical health.The present study aimed to evaluate the impact of the physical form in neighborhoods on the walkability to explain the effect of the urban element on physical activity. Haft Hoz (with grid pattern) and Bagh-e-Feyz (with organic pattern) were selected due to the different spatial configurations. The social and economic conditions were identical to avoid the impact of intervening variables. The spatial configuration and order were investigated by using the space syntax technique and Depth Map Software . The typology and field survey methods were used to evaluate the characteristics of the blocks and parcels and land use, respectively. In addition to examining the physical forms in the neighborhoods objectively, the subjective technique was used by interviewing the residents and getting to the theoretical saturation. Based on the results, spatial configuration, blocking pattern and parcel, and land use affect the walkability. تفاصيل المقالة
      • حرية الوصول المقاله

        20 - The Morphology of Qom; The Study on Spatial Configuration Changes of The City (1956-2021)
        Seyed Abdolhadi Daneshpour Mostafa Abbaszadegan Masoud Elahi
        The present study attempts to investigate the relationship between spatial configuration changes of Qom and the central core in the last half century. The main objective of this study is to review the Spatial form of Qom, and analyze the effect of changes in Urban confi أکثر
        The present study attempts to investigate the relationship between spatial configuration changes of Qom and the central core in the last half century. The main objective of this study is to review the Spatial form of Qom, and analyze the effect of changes in Urban configuration on the central core of the city and the main axes of urban activities during 1946 to 2011 and ultimately, Forecast the future status of the city based on the extensive changes being conducted on the configuration of this religious metropolis in the time horizon of 2021. The findings of this study on the alignment of decisions made with regard to the Qom structure and the Holy Shrine of Fatima Masumeh (AS) as the Central core of the city in the last half century have identified two time periods. The first, Decisions adopted on developmental changes during 1946 to 2011, which weakened the Qom spatial Configuration Values. Second, Future developmental changes during 2011 to 2021 that are expected to lead to improvements in Spatial Configuration Values. Based on Qom morphological analysis in the last half century, this study concludes if the Qom roadmap foreseen for the time horizon of 2021, including construction of ceremonial axis of Prophet (PBUH) boulevard, inner ring roads and completion of urban ring roads happens, then the improvement of global integration, synergy, intelligibility and Choice values in the Central core and other parts of the city are expected. تفاصيل المقالة
      • حرية الوصول المقاله

        21 - Joint Inspecting Interval Optimization and Redundancy Allocation Problem Optimization for Cold-Standby Systems with Non-Identical Components
        Mani Sharifi
        In this paper, we study a redundancy allocation problem. The investigated problem has a system with s serially connected subsystems, which are under periodic inspection. In each subsystem, component failures are diagnosed by a perfect switching system, and the first com أکثر
        In this paper, we study a redundancy allocation problem. The investigated problem has a system with s serially connected subsystems, which are under periodic inspection. In each subsystem, component failures are diagnosed by a perfect switching system, and the first component on the standby queue starts working as a replacement for the failed component. . The failures of the components are detected at inspection. The failed component(s) will be repaired during the next inspection interval and added to the standby queue. The subsystems can be in different states depending on their working component and the order of the components on the standby queue. We present an approach to calculate the subsystems-states transition probabilities. We used a two-phase approach to minimize the system cost. In the first phase, we minimize the subsystem's expected total cost by determining the optimal number of components and the optimal subsystem's inspection intervals. The expected total cost consists of downtime, repair, and inspection costs of the subsystems per unit time. Then, in the second phase, we determine the optimum allocated components to each subsystem under some constraints to find the optimal system inspection cost per unit time تفاصيل المقالة
      • حرية الوصول المقاله

        22 - ارایه الگوی مناسب مدیریت استراتژیک منابع انسانی با رویکرد قابلیت ایجاد دانـش سازمـانی در سازمان های دولتی جمهوری اسلامی ایران
        مختار رنجبر مسعود پورکیایی
        مدیریت استراتژیک منابع انسانی حوزه نسبتاً جدیدی از پژوهش مدیریت است که در جستجوی ارزیابی عملکرد منابع انسانی با دیدگاه کلان و آزمون اثرات عملکرد منابع انسانی بر متغیرهای سطوح عملکرد سازمانی به جای نتایج فردی می باشد [6]. این مقاله بر روی نتایج قابلیت ایجاد دانش سازمانی أکثر
        مدیریت استراتژیک منابع انسانی حوزه نسبتاً جدیدی از پژوهش مدیریت است که در جستجوی ارزیابی عملکرد منابع انسانی با دیدگاه کلان و آزمون اثرات عملکرد منابع انسانی بر متغیرهای سطوح عملکرد سازمانی به جای نتایج فردی می باشد [6]. این مقاله بر روی نتایج قابلیت ایجاد دانش سازمانی تمرکز می کند. به طور ویژه این مقاله بررسی می کند که چگونه مدیریت استراتژیک منابع انسانی در سازمان های دولتی ایران می تواند برای ایجاد و حمایت از قابلیت دانش سازمانی مورد استفاده قرار گیرد و این قابلیت چگونه با نوآوری سازمانی مرتبط می باشد. در نهایت بر مبنای نتایج پژوهش، مدل مناسبی برای سازمان های دولتی ایران ارایه می گردد. نتایج نشان می دهد که زیر ساخت های چهارگانه مدیریت استراتژیک منابع انسانی به طور قابل ملاحظه ای با سه ویژگی نیروی کار (سرمایه انسانی، انگیزش کارمند و چرخش کارمند) مرتبط می باشد. همچنین ویژگی های نیروی کار نیز به طور قابل ملاحظه ای با قابلیت ایجاد دانش سازمانی مرتبط می باشد. در نهایت نتایج ارتباط قابل ملاحظه ای را میان قابلیت ایجاد دانش سازمانی با نوآوری سازمانی نشان می دهد. تفاصيل المقالة
      • حرية الوصول المقاله

        23 - Vortex-induced energy harvesting of an elliptic blade in high-Reynolds lid-driven cavity flow
        Ali Akbar Hosseinjani Ghasem Akbari
        Lid-driven cavity flow is characterized by large-scale energetic eddies which are potential for energy harvesting purposes. The present article deals with numerical study of vortex-induced autorotation of an elliptic blade hinged at the center of a lid-driven cavity.Imm أکثر
        Lid-driven cavity flow is characterized by large-scale energetic eddies which are potential for energy harvesting purposes. The present article deals with numerical study of vortex-induced autorotation of an elliptic blade hinged at the center of a lid-driven cavity.Immersed boundary method is utilized to solve the governing equations for this moving boundary problem. Four different blade dimensions are considered at a fairly high-Reynolds number to evaluate the impact of various vortex types and flow unsteadiness on the blade dynamics. Small-amplitude fluttering, clockwise autorotation and counter-clockwise autorotation are three dominant modes observed at various configurations and different temporal stages. The average-length blade is equally characterized by vortices at both directions, and consequently experiences a fluttering mode. In contrast, short (long) bladeis mainly affected by one dominant vortex type, leading to steady autorotation in counter-clockwise (clockwise) direction. At stable autorotation of blade in both directions, regular cyclic temporal oscillations are observed in the rotational speed, which are due to cyclic evolution of the near-blade vortices and their alternating moment applied to the blade. تفاصيل المقالة
      • حرية الوصول المقاله

        24 - بازتاب ساختار اجتماعی در پیکره‌بندیی فضایی مسکن با تاکید بر تئوری نحو‌فضا (مطالعه موردی:خانه‌های سنتی و معاصر بافت فرهنگی تاریخی تبریز)
        عاطفه فتح بقالی محمد جواد مقصودی تیلکی معصومه هدایتی مرزبالی
        خانه ها بعنوان اصلی ترین مکان زندگی انسان معاصر، می‌بایست به نیازها، ﺑﺎورﻫﺎ وارزشﻫﺎی ساکنان آن پاسخ دهند. شکل و کالبد فضا بر شیوه زندگی و رفتار انسان تاثیر می‌گذارد. دراین تحقیق به واکاوی پیچیدگی‌های روابط اجتماعی و فرهنگی در ساختار فضایی خانه‌های دوره سنتی و معاصر شهر أکثر
        خانه ها بعنوان اصلی ترین مکان زندگی انسان معاصر، می‌بایست به نیازها، ﺑﺎورﻫﺎ وارزشﻫﺎی ساکنان آن پاسخ دهند. شکل و کالبد فضا بر شیوه زندگی و رفتار انسان تاثیر می‌گذارد. دراین تحقیق به واکاوی پیچیدگی‌های روابط اجتماعی و فرهنگی در ساختار فضایی خانه‌های دوره سنتی و معاصر شهر تبریز، با استفاده از تئوری نحو‌‌فضا پرداخته شده است. تحقیق پیش رو تلاش می کند تا ازمنظر معیارهای نحو فضا، تغییرات عرصه بندی و ساختار فضایی خانه ها را استخراج و معرفی نماید. برای تحقق این هدف، پس از انتخاب نمونه موردی از بافت فرهنگی و تاریخی شهر تبریز، از نرم‌افزار ای‌گرف برای ترسیم و دسته بندی نمونه ها و تحلیل ساختار فضایی، و نمودار توجیهی آنها استفاده شده است. سپس شاخص های همپیوندی و عمق نسبی فضاها با استفاده از روابط ریاضی نحو فضا و شاخص های قابلیت دید، مخروط دید با استفاده از نرم افزار دپس‌مپ برای هر نمونه مورد تجزیه و تحلیل قرار گرفته است. نتایج تحقیق نشان می‌دهد که رابطه‌ای مستقیم میان متغیر ساختارهای اجتماعی با متغییر چیدمان فضا وجود دارد.این امر بدان معناست که شاخص‌های ساختارهای اجتماعی حاکم بر جامعه از جمله تعاملات، سلسه مراتب و محرمیت از ارزش‌های مهم معماری خانه‌های سنتی بوده ولی در خانه‌های معاصر به علت داشتن دیدگاه کالبدی صرف و عدم شناخت کافی از ساکنین و نیازهای آنها، تغییرات زیادی در بحث مسکن به وقوع پیوسته که منجر به عدم تعلق ساکنین به خانه شده است. تفاصيل المقالة
      • حرية الوصول المقاله

        25 - Optimal Active Distribution Network Reconfiguration for Loss and Supply Cost Minimization Using Grey Wolf Algorithm
        katayun Rahmati Reza Ebrahimi Vahid Parvin Darabad
        In this paper, a novel reconfiguration approach for distribution network incorporating distributed generation is introduced aiming to minimize power losses and energy supply costs. Given the temporally variable consumption of residential, industrial and commercial loads أکثر
        In this paper, a novel reconfiguration approach for distribution network incorporating distributed generation is introduced aiming to minimize power losses and energy supply costs. Given the temporally variable consumption of residential, industrial and commercial loads and the time-variant energy prices, an hourly reconfiguration scheme for an entire daily cycle is proposed. Also considering the privately-owned nature of distributed sources, the energy supply is carried out within a competitive market. The optimization is based on grey wolf algorithm (GWO), implemented in MATLAB software on an IEEE 33-bus test network. The simulation is done for four scenarios with respective objective functions for the evaluations of the results thereof. By comparing the obtained results it is concluded the configuration of network will be the unique for each of objective function. Finally, the effects of switching at different hours of day are compared in terms of loss minimization and supply costs against single daily switching scheme. تفاصيل المقالة
      • حرية الوصول المقاله

        26 - Smart Power Distribution Network Reconfiguration based on the Graph Theory and Particle Swarm Optimization
        Hassan Chahi Javad Mashayekhifard Ghasem Faezian
        Distribution system reconfiguration occurs with switching operation. It is a simple and low-cost method that reduces system losses without adding additional equipment to the system. Radial structure, connection to the very high power transmission, microgrids, and distri أکثر
        Distribution system reconfiguration occurs with switching operation. It is a simple and low-cost method that reduces system losses without adding additional equipment to the system. Radial structure, connection to the very high power transmission, microgrids, and distributed generation sources in the smart distribution network adds to the complexity of the problem. The Particle Swarm Optimization algorithm is suitable for a multi-objective and non-linear problem. This paper proposes a novel method for reconfiguration of distribution networks. The proposed method is based on Particle Swarm Optimization and Graph theory. The objective functions of the optimization problem are loss reduction, voltage profile, and Reliability improvement of the network. The proposed method has been conducted under consideration distributed generation and micro-grid on Esfarayen medium voltage distribution network. Three different scenarios without/with a distributed generation unit are investigated in this paper. The results also demonstrate that the proposed method is capable of finding the best solution. تفاصيل المقالة
      • حرية الوصول المقاله

        27 - A Two-phase Model for Product Design Development and Evaluation and Supplier Selection in Product Configuration Change Process (Case study: SUPCO)
        Mousa Amini Alireza Alinezhad Sepideh Ghasemian
        A supply chain is composed of a complex sequence of processing stages, ranging from raw materials supplies, parts manufacturing, components and end-products assembling, to the delivery of end products. In the context of supply chain management, supplier selection decisi أکثر
        A supply chain is composed of a complex sequence of processing stages, ranging from raw materials supplies, parts manufacturing, components and end-products assembling, to the delivery of end products. In the context of supply chain management, supplier selection decision is considered one of the key issues faced by operations and purchasing managers to remain competitive. Therefore, requirements of engineers or customers may result in product configuration change with product life cycle. Effective management of product configuration can actually enhance productivity and customer satisfaction. This study proposes a two-phase model in the first phase of which an innovative design for new parts will be proposed by contradiction matrix, and translating contradictions into 39 engineering parameters of TRIZ , solving them by 40 innovative principals and by means of AHP fuzzy. In the second phase, an appropriate supplier for new product will be selected by value engineering and target costing. Finally, a case of clutch system in SUPCO is used to approve the applicability of the proposed approach. In this study, the best choice is the use of fuzzy AHP. After determining the total cost of the target product and initial screening of the suppliers based on that, the index values are calculated for each supplier according to the criteria of the organization. Thus, the best suppliers with the highest value to the organization have been selected. تفاصيل المقالة
      • حرية الوصول المقاله

        28 - ارائه استراتژی پویا برای تجدید ارایش شبکه توزیع با توجه به اهمیت قابلیت اطمینان و امنیت سیستم
        حسین لطفی رضا قاضی محمدباقر نقیبی سیستانی
        تجدید ارایش فیدرهای شبکه توزیع یک مساله بهینه سازی در سیستم قدرت است که با تغییر وضعیت سوئیچینگ در شبکه توزیع برای براورده کردن توابع هدف خاصی انجام می‌شود. در این مطالعه، مساله تجدید ارایش پویا فیدرهای توزیع در حضور منابع تولید پراکنده و سیستم‌های ذخیره انرژی بهینه ساز أکثر
        تجدید ارایش فیدرهای شبکه توزیع یک مساله بهینه سازی در سیستم قدرت است که با تغییر وضعیت سوئیچینگ در شبکه توزیع برای براورده کردن توابع هدف خاصی انجام می‌شود. در این مطالعه، مساله تجدید ارایش پویا فیدرهای توزیع در حضور منابع تولید پراکنده و سیستم‌های ذخیره انرژی بهینه سازی شده است. با توجه به اینکه در مطالعات تجدید ارایش به قابلیت اطمینان و امنیت شبکه توجه کمتری شده است، به همین منظور سعی شده از تابع هدف انرژی توزیع نشده در کنار شاخص پایداری ولتاژ و تلفات انرژی در این مطالعه استفاده شود. به منظور بهینه سازی همزمان شاخص‌ قابلیت اطمینان و توابع هدف دیگر، طرح بهینه‌ای برای توپولوژی بهینه فیدرهای شبکه توزیع و همچنین شارژ و دشارژ سیستم‌های ذخیره انرژی ارائه شده است. با توجه به مساله پیچیده بهینه سازی در این مطالعه، الگوریتم بهبود یافته جهش قورباغه مبتنی بر یک استراتژی جدید جهش ارائه شده است. به منظور نشان دادن توانایی روش مورد نظر در ارائه طرح بهینه برای مساله بهینه سازی چند هدفه در این مطالعه، از یک شبکه 33 باسه استفاده شده است. تفاصيل المقالة
      • حرية الوصول المقاله

        29 - بهبود عملکرد شبکه توزیع با استراتژی هماهنگی بانک‌های خازنی قابل کلید‌زنی و بازآرایی دینامیکی شبکه در حضور منابع تولید پراکنده
        رامین برجعلی نوه سی داریوش نظرپور اکبری رضا غنی زاده پیام عالمی
        پنل های خورشیدی (PVs) و توربین های بادی (WTs) از مهمترین و پرکاربردترین منابع تولید پراکنده (DG) هستند. محدودیت‌های مکان احداث و مسائل زیست محیطی و اقتصادی، اتصال DG ها را به نقاط مورد نظر شبکه توزیع مشکل و در برخی موارد غیر ممکن کرده است. از این رو نصب DG ها در مکان‌ها أکثر
        پنل های خورشیدی (PVs) و توربین های بادی (WTs) از مهمترین و پرکاربردترین منابع تولید پراکنده (DG) هستند. محدودیت‌های مکان احداث و مسائل زیست محیطی و اقتصادی، اتصال DG ها را به نقاط مورد نظر شبکه توزیع مشکل و در برخی موارد غیر ممکن کرده است. از این رو نصب DG ها در مکان‌های غیر بهینه، ممکن است باعث افزایش ولتاژ در نقاط اتصال مشترک (PCC) شود. در این مقاله، هماهنگی بانک‌های خازنی قابل کلیدزنی (SCB) و بازآرایی دینامیک شبکه بررسی شده و به منظور جلوگیری از تخطی حد بالا و پایین ولتاژ معرفی شده است. جهت دست یابی به مکان‌های بهینه SCB از الگوریتم بهینه‌سازی ازدحام ذرات (PSO) استفاده شده است. روش جدیدی در تعیین ظرفیت بهینه CBها (CSM) پیشنهاد شده که مقادیر بهینه توان راکتیو گره های مشخص شده توسط PSO را تعیین می کند. منحنی 24 ساعته به دست آمده از توان راکتیو پیشنهادی، نقش محوری را در طراحی SCB ایفا می‌کند. نتایج شبیه سازی به دست آمده بیانگر قابلیت و سودمندی رویکرد پیشنهادی در بهبود عملکرد شبکه توزیع است. تفاصيل المقالة
      • حرية الوصول المقاله

        30 - ارائه یک رویکرد ترکیبی جدید برای مسئله چندهدفه تجدید آرایش شبکه توزیع با در نظر گرفتن اهمیت قابلیت اطمینان
        بنیامین کتانچی علی اصغر شجاعی مهدی یعقوبی
        تجدید آرایش فیدرهای شبکه توزیع یک مسئله بهینه سازی در سیستم قدرت است که با تغییر وضعیت سوئیچینگ در شبکه توزیع برای برآورده کردن توابع هدف خاصی انجام می شود. بررسی مطالعات نشان می‌دهد که اغلب تلفات توان و انحراف ولتاژ باس ها به‌عنوان توابع هدف در حل مسئله تجدید آرایش فید أکثر
        تجدید آرایش فیدرهای شبکه توزیع یک مسئله بهینه سازی در سیستم قدرت است که با تغییر وضعیت سوئیچینگ در شبکه توزیع برای برآورده کردن توابع هدف خاصی انجام می شود. بررسی مطالعات نشان می‌دهد که اغلب تلفات توان و انحراف ولتاژ باس ها به‌عنوان توابع هدف در حل مسئله تجدید آرایش فیدرهای شبکه توزیع در نظر گرفته ‌شده است. با این ‌حال توابع هدف جدیدتر نظیر قابلیت اطمینان کمتر مورد توجه قرار گرفته‌است. در این مقاله، برای حل مسئله چندهدفه تجدید آرایش شبکه توزیع، از شاخص انرژی توزیع نشده به‌عنوان تابع قابلیت اطمینان، همراه با تلفات توان و تعداد سوئیچینگ در حضور واحدهای تولید پراکنده استفاده ‌شده است. تجدید آرایش فیدر های توزیع به طور ذاتی مساله پیچیده ای است، در نظر گرفتن تاثیر منابع تولیدپراکنده در شبکه توزیع مساله را پیچیده تر از قبل می کند، به همین منظور از یک روش تکاملی مبتنی بر ترکیب روش‌های اجتماع ذرات و بهبود یافته جهش قورباغه برای حل مسئله بهینه‌سازی غیرخطی استفاده شده است. سیستم های 33 و 70 باسه نیز برای سنجش اثربخشی الگوریتم ترکیبی پیشنهادی مورد استفاده قرار گرفته‌اند و همچنین نتایج روش پیشنهادی با نتایج سایر روش های تکاملی مقایسه می شود. تفاصيل المقالة
      • حرية الوصول المقاله

        31 - بازآرایی سکسیونر و جایابی توامان خازن در شبکه‌های توزیع برق توسط الگوریتم تکثیر باکتری
        محمدعلی محمدنیا علی‌اکبر قره‌ویسی
        امروزه مهمترین دغدغه مهندسین در شبکه‌های توزیع کاهش تلفات توان، بهبود پروفیل ولتاژ و تامین انرژی قابل‌اطمینان و مستمر با حداقل هزینه برای مصرف‌کننده‌ها می‌باشد. جایابی بهینه همزمان سکسیونر (بازآرایی) و خازن موازی به همراه تعیین ظرفیت بهینه خازن، ساده‌ترین و کم ‌هزینه‌تر أکثر
        امروزه مهمترین دغدغه مهندسین در شبکه‌های توزیع کاهش تلفات توان، بهبود پروفیل ولتاژ و تامین انرژی قابل‌اطمینان و مستمر با حداقل هزینه برای مصرف‌کننده‌ها می‌باشد. جایابی بهینه همزمان سکسیونر (بازآرایی) و خازن موازی به همراه تعیین ظرفیت بهینه خازن، ساده‌ترین و کم ‌هزینه‌ترین روش برای تامین اهداف فوق می‌باشد. با توجه به گسترش شبکه‌های توزیع و پیچیده‌تر‌شدن ارتباطات این شبکه‌ها استفاده از تکنیک‌های هوشمند اجتناب‌ناپذیر است. در این مقاله از الگوریتم تکثیر باکتری (BFA) برای اولین بار به منظور جایابی بهینه همزمان سکسیونر و خازن موازی به همراه تعیین ظرفیت بهینه خازن استفاده شده است. تفاصيل المقالة
      • حرية الوصول المقاله

        32 - ترکیب جدیدی از سیستم استنتاج فازی و الگوریتم علف‌های هرز به منظور بازآرایی همزمان با جایابی و تعیین ظرفیت بهینه تولیدات پراکنده در شبکه‌های توزیع
        هاجر باقری طولابی محمودرضا شاکرمی
        در این مقاله یک روش بهینه‌سازی ترکیبی به منظور بازآرایی و تخصیص مناسب تولیدات پراکنده در فیدرهای شبکه توزیع برق ارائه شده است. اهداف این بهینه سازی، کاهش تلفات، بهبود پروفیل ولتاژ و افزایش تعادل بار در شبکه توزیع می‌باشند. از الگوریتم علف‌های هرز جهت تعیین آرایش بهینه ش أکثر
        در این مقاله یک روش بهینه‌سازی ترکیبی به منظور بازآرایی و تخصیص مناسب تولیدات پراکنده در فیدرهای شبکه توزیع برق ارائه شده است. اهداف این بهینه سازی، کاهش تلفات، بهبود پروفیل ولتاژ و افزایش تعادل بار در شبکه توزیع می‌باشند. از الگوریتم علف‌های هرز جهت تعیین آرایش بهینه شبکه توزیع همراه با تعیین مکان و ظرفیت مناسب برای واحدهای تولید پراکنده استفاده شده است. به منظور بهبود توانایی این الگوریتم از تئوری فازی بهره گرفته شده تا مسئله بهینه‌سازی چند منظوره به مسئله بهینه‌سازی تک هدفه تبدیل شود. شبکه توزیع 33 باسه جهت ارزیابی روش پیشنهادی در هر سه بار نامی، سبک و سنگین مورد ارزیابی قرار گرفته است. نتایج به دست آمده نشان می‌دهد که روش پیشنهادی، در بهبود هر سه شاخص مورد آزمایش، عملکرد قابل قبولی داشته و نیز در مقایسه با الگوریتم‌های دیگر مانند الگوریتم بهینه‌سازی غذایابی و الگوریتم ژنتیک موفق‌تر عمل نموده است. تفاصيل المقالة
      • حرية الوصول المقاله

        33 - تحلیل ادراک حریم در پیکربندی فضایی مجتمع های مسکونی معاصر با رویکرد نحو فضا (مطالعه موردی: مجتمع مسکونی آسمان تبریز)
        سولماز بابازاده اسکویی سحر طوفان سیروس جمالی
        پژوهش حاضر به تحلیل رابطه متقابل بین پیکربندی فضایی، عمق فضا، روابط فضای معماری در ادراک حریم، جهت شناسایی الگوی پنهان و ساختار اجتماعی ارتباطات در یکی از مجتمع های مسکونی معاصر در تبریز، می پردازد. "عمق"، "هم پیوندی" از پارامترهای بسیار مهم در ادراک حریم می باشند که به أکثر
        پژوهش حاضر به تحلیل رابطه متقابل بین پیکربندی فضایی، عمق فضا، روابط فضای معماری در ادراک حریم، جهت شناسایی الگوی پنهان و ساختار اجتماعی ارتباطات در یکی از مجتمع های مسکونی معاصر در تبریز، می پردازد. "عمق"، "هم پیوندی" از پارامترهای بسیار مهم در ادراک حریم می باشند که به کمک ترسیم نمودارهای توجیهی و خروجی متغیرهای عددی در نرم افزار تخصصی نحو فضا مورد مطالعه قرار گرفته اند. تکنیک نحو فضا در واقع بررسی ارتباط هر واحد فضایی در یک مجموعه در فضای هم جوار است که می توان با شناخت ساختار اجتماعی ارتباطات اجزا باهم، به الگوی فعالیت های نظام یافته و بار معنایی و روابط فضایی دست یافت. روش تحقیق در این پژوهش، توصیفی- تحلیلی با روش تجزیه و تحلیل اطلاعات از نوع استدلال منطقی می باشد که در تدوین چارچوب نظری از روش کیفی و در تحلیل نقشه ها و مدلسازی، از روش کمی استفاده شده است. نتایج تحقیق بر روی 11 نوع تیپ پلان متفاوت از واحدهای مسکونی این مجتمع، نشان از وجود ارتباط بین روابط فضای معماری و پیکر بندی کالبد معماری و عمق فضایی در تعریف حریم دارد، همچنین می تواند ارتباطات مناسب فضایی را برای دستیابی به حریم بیشتر جهت استفاده در طراحی پلان مجتمع های معاصر را، مشخص نماید. تفاصيل المقالة
      • حرية الوصول المقاله

        34 - تبیین اثرپذیری کیفیت‌‌‌‌های تجربی محیط از پیکره‌بندی فضایی باغ‌‌شهر (مطالعه موردی: باغ‌‌شهر مهرشهر)
        آذین عطایی جمال الدین سهیلی مریم ارمغان علی اکبر حیدری
        مقدمه: توسعه شهر و نیازهای شهرنشینی، توجه به مطالبات بهزیستی افراد را به امری ضروری مبدل کرده است. اهمیت پاسخ‌‌گویی به ارتقا کیفی محیط در راستای تأمین رضایت شهروندان، ضمن کارآمدی کالبدی، ضرورت ملاحظات کیفیت‌های تجربی محیط را در فرآیند چیدمان فضایی نشان می‌دهد؛ چراکه برآ أکثر
        مقدمه: توسعه شهر و نیازهای شهرنشینی، توجه به مطالبات بهزیستی افراد را به امری ضروری مبدل کرده است. اهمیت پاسخ‌‌گویی به ارتقا کیفی محیط در راستای تأمین رضایت شهروندان، ضمن کارآمدی کالبدی، ضرورت ملاحظات کیفیت‌های تجربی محیط را در فرآیند چیدمان فضایی نشان می‌دهد؛ چراکه برآوردهای منحصراً مادی و برخورد یک‌‌جانبه عملکردگرا در طراحی، با تضعیف مطلوبیت کیفی و خلق محیطی ناکارآمد در تأمین نیازها، تجربه زیسته انسان‌ها را با محدودیت روبرو کرده است.هدف پژوهش: این پژوهش با هدف تبیین اثرگذاری پیکره‌بندی فضایی بر تلقی کیفی افراد از محیط انجام‌شده است. با فرض وجود ارتباط میان کیفیت محیطی با سازمان فضایی و در تلاش برای پاسخگویی به چگونگی این ارتباط اقدام‌ شده است.روش شناسی تحقیق: پژوهش حاضر با روش تحلیلی- تفسیری انجام‌شده و رویکرد روش شناسی آن کیفی است. آن دسته معیارهای کیفیت محیطی مبتنی بر مطالعات کتابخانه ای و مبانی نظری را که بیشترین قرابت مفهومی با منطق اجتماعی فضا داشته‌اند، با تکنیک دلفی در دو مرحله تدقیق یافت و به‌‌وسیله پرسشنامه مکان محور در معابر تفکیک یافته بر اساس میزان شاخص هم‌پیوندی، مستخرج از تحلیل چیدمان فضا نظرسنجی انجام‌شده است. حجم نمونه 384 نفر ساکنان مهرشهر بوده که به روش نمونه‌گیری تصادفی خوشه ای انتخاب شدند. به منظور تجزیه و تحلیل نتایج از شیوه استدلال منطقی استفاده‌شده است.قلمرو جغرافیایی پژوهش: محدوده مورد مطالعه، فاز یک محله مهرشهر در شهر کرج، به دلیل پیکره‌‌بندی فضایی الگوی باغ‌‌شهری است که نسبتاً بدون تغییر ساختاری از زمان طراحی تاکنون حفظ‌شده است.یافته ها: بر اساس یافته‌‌ها، ویژگی‌‌های زمینه‌ای معابر با هم‌‌پیوندی بالا، از دیدگاه ساکنان، بیشترین مطلوبیت را در ارتباط با شاخص‌های سنجش کیفی محیط مربوط به مؤلفه کالبدی- عملکردی منتج شده است. معابر با هم‌‌پیوندی پایین، بالاترین رضایتمندی مؤلفه ادراکی- زیباشناختی را دارا بوده و درنهایت، معابر با هم‌‌پیوندی متوسط، تأمین‌کننده بستر تعاملی فرهنگی- اجتماعی غنی‌‌تری بوده است.نتایج: ظرفیت فضاها با هدف اعتلای تجربه کیفی محیط، تنها توسط مناسبات و خصوصیات شاکله‌ای فضا تأمین نشده و عموماً چگونگی استفاده از فضا، منوط به مداخلات تجربی استفاده‌کنندگان است که تأثیرات فراوانی بر فرآیند طراحی تا بهره‌‌برداری از فضاهای عمومی خواهد داشت. تفاصيل المقالة
      • حرية الوصول المقاله

        35 - Dynamic configuration and collaborative scheduling in supply chains based on scalable multi-agent architecture
        Fu-Shiung Hsieh
        Due to diversified and frequently changing demands from customers, technological advances and global competition, manufacturers rely on collaboration with their business partners to share costs, risks and expertise. How to take advantage of advancement of technologies t أکثر
        Due to diversified and frequently changing demands from customers, technological advances and global competition, manufacturers rely on collaboration with their business partners to share costs, risks and expertise. How to take advantage of advancement of technologies to effectively support operations and create competitive advantage is critical for manufacturers to survive. To respond to these challenges, development of a dynamic scheme to better manage collaborative workflows is urgent. In this paper, we will study how to develop a flexible and scalable framework to dynamically and coherently configure workflows that can meet order requirements based on multi-agent systems (MAS). Configuring and scheduling collaborative workflows is a challenging problem due to the computational complexity involved, distributed architecture and dependency among different partners&rsquo; workflows. To achieve flexibility and reduce the cost and time involved in configuration of a supply chain network, we propose an approach that combines MAS, contract net protocol, workflow models and automated transformation of the workflow models to dynamically formulate the scheduling problem. To attain scalability, we develop a solution algorithm to solve the optimization problem by a collaborative and distributed computation scheme. We implement a software system based on industrial standards, including FIPA and the Petri net workflow specification model. In addition, we also illustrate effectiveness and analyze scalability of our approach by examples. Our approach facilitates collaboration between partners and provides a scalable solution for the increasing size of supply chain networks. تفاصيل المقالة
      • حرية الوصول المقاله

        36 - A mathematical model for the design of distributed layout by considering production planning and system reconfiguration over multiple time periods
        Farhad Shafigh Fantahun M. Defersha Soha Eid Moussa
        In this paper, we develop a new mathematical model that integrates layout configuration and production planning in the design of dynamic distributed layouts. The model incorporates a number of important manufacturing attributes such as demand fluctuation, system reconfi أکثر
        In this paper, we develop a new mathematical model that integrates layout configuration and production planning in the design of dynamic distributed layouts. The model incorporates a number of important manufacturing attributes such as demand fluctuation, system reconfiguration, lot splitting, work load balancing, alternative routings, machine capability and tooling requirements. In addition, the model allows several cost elements to be optimized in an integrated manner. These costs are associated with material handling, machine relocation, setup, inventory carrying, in-house production and subcontracting needs. Numerical examples of different sizes are presented to illustrate the nature of the developed model and shed light on several managerial insights. تفاصيل المقالة
      • حرية الوصول المقاله

        37 - A new memetic algorithm for mitigating tandem automated guided vehicle system partitioning problem
        Parinaz Pourrahimian
        Automated Guided Vehicle System (AGVS) provides the flexibility and automation demanded by Flexible Manufacturing System (FMS). However, with the growing concern on responsible management of resource use, it is crucial to manage these vehicles in an efficient way in ord أکثر
        Automated Guided Vehicle System (AGVS) provides the flexibility and automation demanded by Flexible Manufacturing System (FMS). However, with the growing concern on responsible management of resource use, it is crucial to manage these vehicles in an efficient way in order reduces travel time and controls conflicts and congestions. This paper presents the development process of a new Memetic Algorithm (MA) for optimizing partitioning problem of tandem AGVS. MAs employ a Genetic Algorithm (GA), as a global search, and apply a local search to bring the solutions to a local optimum point. A new Tabu Search (TS) has been developed and combined with a GA to refine the newly generated individuals by GA. The aim of the proposed algorithm is to minimize the maximum workload of the system. After all, the performance of the proposed algorithm is evaluated using Matlab. This study also compared the objective function of the proposed MA with GA. The results showed that the TS, as a local search, significantly improves the objective function of the GA for different system sizes with large and small numbers of zone by 1.26 in average. تفاصيل المقالة
      • حرية الوصول المقاله

        38 - The effect of supply network configuration on occurring chaotic behavior in the retailer’s inventory
        M.J Tarokh N Dabiri A Shokouhi H Shafiei
        ToToday&rsquo;s market place is increasingly dynamic and volatile. In this area supply network issues recently have attracted a lot of attention from industrial practitioners and academics worldwide. Chaos theory is the study of complex, nonlinear, dynamic systems. For أکثر
        ToToday&rsquo;s market place is increasingly dynamic and volatile. In this area supply network issues recently have attracted a lot of attention from industrial practitioners and academics worldwide. Chaos theory is the study of complex, nonlinear, dynamic systems. For chaotic systems, a tiny change in conditions may result in an enormous change in system output, whereas substantial changes in conditions may be absorbed without significant effect to the system&rsquo;s output. In this paper, the researchers have investigated the effect of supply network design on the chaotic behavior of supply network from retailer&rsquo;s inventory point of view. The multi-level supply network is characterized by extension of the widely known beer distribution model. System dynamic approach is implemented to study the supply network behavior. Furthermore, we use Lyapunov exponents to quantify the system chaos. Simulation outputs and its analysis indicate that the number of distributors and wholesalers have a significantly effect on making the system behavior chaotic. تفاصيل المقالة
      • حرية الوصول المقاله

        39 - Solving the tandem AGV network design problem using tabu search: Cases of maximum workload and workload balance with fixed and non-fixed number of loops
        E Miandoabchi R Zanjirani Farahani
        A tandem AGV configuration connects all cells of a manufacturing area by means of non-overlapping, sin-gle-vehicle closed loops. Each loop has at least one additional P/D station, provided as an interface between adjacent loops. This study describes the development of t أکثر
        A tandem AGV configuration connects all cells of a manufacturing area by means of non-overlapping, sin-gle-vehicle closed loops. Each loop has at least one additional P/D station, provided as an interface between adjacent loops. This study describes the development of three tabu search algorithms for the design of tandem AGV systems. The first algorithm was developed based on the basic definition of a tandem network. The sec-ond and third algorithms, consider no preset number of loops and try to evenly distribute workload among loops by using workload balance as their objective functions. They generate different design scenarios for the tandem network, which can be evaluated and selected using a multi-attribute objective function. The first al-gorithm and the partitioning algorithm presented by Bozer and Srinivasan are compared for randomly gener-ated problems. Results show that for large-scale problems, the partitioning algorithm often leads to infeasible configurations with crossed loops in spite of its shorter running time. However, the newly developed algo-rithm avoids infeasible configurations and often yields better objective function values. تفاصيل المقالة
      • حرية الوصول المقاله

        40 - Distribution Network Reconfiguration Study Using The Gravitational Search Algorithm
        Nader Mehrabi Javad Olamaei
        In this paper, the electrical distribution network reconfiguration to achieve loss reduction, load balancing and improve voltage profile in the presence of Distributed Generation (DG) with the gravitational search algorithm (GSA), is investigated. By choosing a 33-bus I أکثر
        In this paper, the electrical distribution network reconfiguration to achieve loss reduction, load balancing and improve voltage profile in the presence of Distributed Generation (DG) with the gravitational search algorithm (GSA), is investigated. By choosing a 33-bus IEEE sample network and running a computer simulation on it, it is observed that the results of this rearrangement are comparable with similar papers. تفاصيل المقالة
      • حرية الوصول المقاله

        41 - A new hybrid algorithm for multi-objective distribution feeder reconfiguration considering reliability
        hossein lotfi
        Reducing electricity losses is the main objective in distribution feeder reconfiguration (DFR) problem. Distribution feeder reconfiguration is an optimization problem in power system which is performed through changing switching state. In this study, distribution feeder أکثر
        Reducing electricity losses is the main objective in distribution feeder reconfiguration (DFR) problem. Distribution feeder reconfiguration is an optimization problem in power system which is performed through changing switching state. In this study, distribution feeder reconfiguration is optimized in the presence of distributed generators (DGs). In common DFR problems, reliability constraint is not satisfied and power losses or voltage deviation of buses is selected as the objective function. In this study, multi-objective problem is considered as a combination of reliability along with power losses. By adding reliability, the problem becomes more complex and requires an accurate method for solving multi-objective optimization problem. For this purpose, in this paper proposed a new hybrid evolutionary algorithm for solving the DFR problem. The proposed hybrid evolutionary algorithm is the combination of PSO (particle swarm optimization) and SFLA (shuffled frog leaping algorithm), called Improved particle swarm optimization (IPSO). In order to investigate efficiency of the proposed method, two 33-bus and 70-bus test systems are tested and the results are compared with GA and PSO algorithms تفاصيل المقالة
      • حرية الوصول المقاله

        42 - Multi-Objective Distribution Network Analysis Reconfiguration Considering Reliability of Power Supply based on Particle Swarm Optimization
        Mostafa Karimi
        The distribution dispatcher can modify the overall distribution network configuration without additional investment and resource input by optimizing the switch combination, thus changing the distribution network operating structure. A multi-objective power distribution أکثر
        The distribution dispatcher can modify the overall distribution network configuration without additional investment and resource input by optimizing the switch combination, thus changing the distribution network operating structure. A multi-objective power distribution network reconfiguration model optimization algorithm is suggested in this article. The objective function is chosen as the minimum loss and the optimum reliability index of load balance and power supply, which can meet the conditions of load rate and voltage offset while reducing network loss and improving the efficiency and reliability of power. The objective function is chosen as the minimum loss and the optimum reliability index of load balance and power supply, which can meet the conditions of load rate and voltage offset while reducing network loss and improving the efficiency and reliability of power. Finally, an instance is given to check the efficacy of the proposed The multi-objective reconfiguration system of the network and the optimal solution collection of both security and reliability multi-objective network reconfiguration scheme are obtained. تفاصيل المقالة
      • حرية الوصول المقاله

        43 - Distribution Network Reconfiguration using PSO Algorithm with DLMP Application
        Mostafa Karimi Mohsen Simab Mehdi Nafar
        The topic of distribution network reconfiguration has been recognized as a common problem in the operation of distribution networks. Up to now, reconfiguration of the distribution network has been used to reduce power loss, issues with reliability and emergency problems أکثر
        The topic of distribution network reconfiguration has been recognized as a common problem in the operation of distribution networks. Up to now, reconfiguration of the distribution network has been used to reduce power loss, issues with reliability and emergency problems. As a result of the increasing installation rate of Distributed Generations (DGs) and the increasingly increasing number of Electric Vehicles (EVs), distribution network operators have faced new problems as a result of high sensitive loads. These new facets of the problem of network operation consist of the problem of congestion and enable the business mechanism to be executed by an existing distribution market. With the application of Distribution Locational Marginal Price (DLMP), using Particle Swarm Optimization (PSO), this paper introduces a new methodology to solve this problem. As a suitable case study, the standard IEEE 33-bus network has been selected and simulation results show the compatibility of the proposed system. In the case of not considering DGs and the problem of congestion, comparisons with other papers were also discussed. The participation of DGs in the electricity distribution industry, the issue of congestion and the numerical results have been shown and discussed below. تفاصيل المقالة
      • حرية الوصول المقاله

        44 - Distribution Network Reconfiguration Considering Energy Storage Devices Based on Binary Particle Swarm Optimization
        Mostafa Karimi Mohsen Simab
        This paper studies a new method for reconfiguration of the distribution network that considers access to energy storage devices. Initially, a new distribution network reconfiguration model is being created that takes into account access to energy storage devices. This m أکثر
        This paper studies a new method for reconfiguration of the distribution network that considers access to energy storage devices. Initially, a new distribution network reconfiguration model is being created that takes into account access to energy storage devices. This model takes as an objective function the minimum of network losses and takes into account the current power and voltage constraints induced by energy storage devices. In reconfiguration schemes, the dual power flow directions are also deliberated. To solve the proposed model, the Binary Particle Swarm Optimization (BPSO) is implemented to get the optimal reconfiguration scheme. Finally, to check the correctness and efficacy of the proposed process, two distribution networks with admission to energy storage systems are being checked (Initial topology of 12-bus system - Optimal topology without considering energy storage - Optimal topology considering energy storage), Then proposed more suitable method for solving the proposed reconfiguration models in this manuscript. تفاصيل المقالة
      • حرية الوصول المقاله

        45 - Load Balancing Distribution Network Reconfiguration Based on Binary Particle Swarm Optimization
        Mostafa Karimi Mohsen Simab Mehdi Nafar
        A reconfiguration model for the distribution network with the optimization objective of reducing three -phase disequilibrium is suggested in order to cope with an increasingly serious three -phase unbalance in distribution network. Second, the distribution network recon أکثر
        A reconfiguration model for the distribution network with the optimization objective of reducing three -phase disequilibrium is suggested in order to cope with an increasingly serious three -phase unbalance in distribution network. Second, the distribution network reconfiguration problem is transformed into a problem of constructing the spanning tree of the graph by evaluating the distribution network in topology, which is solved by the process of breaking -cycle -basis. Then an improved Binary Particle Swarm Optimization (BPSO) algorithm is suggested to solve the reconfiguration problem by randomly choosing the first-branch and canceling the heuristic value of the network, which will extend the search scope and prevent search stagnation. Relevant examples of verification show that, relative to traditional approaches, the proposed algorithm can achieve the best global solution with less computational time and greater probability. The proposed algorithm is tested in 33 bus system and the results show the load balancing in distribution network. تفاصيل المقالة
      • حرية الوصول المقاله

        46 - Economic Evaluation of Optimal Capacitor Placement in Reconfiguration Distribution System Using Genetic Algorithm
        Ehsan Sadeghian Ramtin sadeghi
        Optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. The distribution system operator calculates the أکثر
        Optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. The distribution system operator calculates the optimal place, number and capacity of capacitors based on two major purposes: active power loss reduction and return on investment maximization. In this paper, the optimization problem of various values of economic amount of reactive power is formulated; then after evaluation of objective function and implementation of optimization algorithm for each value, the optimum capacity of capacitors and their arrangement in load nodes of power system are extracted. Also, using the proposed objective function, the threshold price of reactive power selling can be calculated; thus the investment of capacitor installation will be beneficial for distribution system operator تفاصيل المقالة
      • حرية الوصول المقاله

        47 - استعاره عنصری از بُعدِ زبانیِ معماری، تطبیق و کلام شاعرانه؛ به تعبیر آلبرتو پرز-گومز
        سحر لری علی خانی مهرداد متین
        در قرن هفدهم دکارت نگاه ها را از عینیت به ذهنیت معطوف کرد؛ در تداوم آن معماری مدرن به طور معمول با مفهوم انتزاع گره خورده است و کمتر می توان از معناگرایی و نشانه پردازی در فرم‌های مدرن نسبت به دوران‌های قبل، سراغ گرفت. در این مقاله سعی شده است ارتباطاتی بین زبان شاعرانه أکثر
        در قرن هفدهم دکارت نگاه ها را از عینیت به ذهنیت معطوف کرد؛ در تداوم آن معماری مدرن به طور معمول با مفهوم انتزاع گره خورده است و کمتر می توان از معناگرایی و نشانه پردازی در فرم‌های مدرن نسبت به دوران‌های قبل، سراغ گرفت. در این مقاله سعی شده است ارتباطاتی بین زبان شاعرانه و معماری مدرن برقرار شود. استعاره با زبان و تفکر در معنای عام آن آمیخته است. معمار، با پذیرش استراتژی هایی که از زبان استعاره استفاده می کنند، شروع به طراحی مکان های مرتبط با فرهنگ می کند. فرم معماری با بیان استعاری فرهنگ، طبیعت و تاریخ معنامند می شود. روش تحقیق از نوع تحلیلی، توصیفی و کیفی است؛ پرسش اصلی تحقیق این است که چگونه می توان با زبان شاعرانه و عنصر استعاره از بحران های معماری مدرن رهایی یافت؟. به منظور پاسخ به این پرسش، صداهای معماری، صدای معمار و کاربرد استعاره در معماری بررسی شد. سپس به کمک گونه بندی انواع استعاره در معماری به سه شکل محسوس، نامحسوس و ترکیبی، به بررسی نمونه‌های معماری معاصر پرداخته شد تا نمودهایی از استعاره های محسوس یا نامحسوس در آثار بررسی شود.نتبجه این پژوهش نشان می‌دهد، راه نجات برای برون رفت از بحران های معماری مدرن که در پنجاه سال اخیر با آن مواجه شده است، درگیر کردن هرمنوتیک و توجه به زبان شاعرانه، در معماری است. تفاصيل المقالة
      • حرية الوصول المقاله

        48 - Dynamical distance as a semi-metric on nuclear configuration space
        M. Rahimi
        In this paper, we introduce the concept of dynamical distance on a nuclear configuration space. We partition the nuclear conguration space into disjoint classes. This classification coincides with the classical partitioning of molecular systems via the concept ofconjuga أکثر
        In this paper, we introduce the concept of dynamical distance on a nuclear configuration space. We partition the nuclear conguration space into disjoint classes. This classification coincides with the classical partitioning of molecular systems via the concept ofconjugacy of dynamical systems. It gives a quantitative criterion to distinguish differentmolecular structures. تفاصيل المقالة
      • حرية الوصول المقاله

        49 - Relativistic Stellar Models with Quadratic Equation of State
        Manuel Malaver Hamed Daei Kasmaei
        In this paper, we have obtained and presented new relativistic stellar configurations considering an anisotropic fluid distribution with a charge distribution and a gravitational potential Z(x) that depends on an adjustable parameter. The quadratic equation of state bas أکثر
        In this paper, we have obtained and presented new relativistic stellar configurations considering an anisotropic fluid distribution with a charge distribution and a gravitational potential Z(x) that depends on an adjustable parameter. The quadratic equation of state based on Feroze and Siddiqui viewpoint is used for the matter distribution. The new solutions can be written in terms of elementary and polynomial functions. We have investigated that the radial pressure, metric coefficients, energy density, anisotropy factor, charge density, mass function have been well defined and are regular in the interior of these new models, which satisfy all physical properties in a realistic star. تفاصيل المقالة
      • حرية الوصول المقاله

        50 - بررسی رابطه بین همسویی استراتژی فناوری اطلاعات و کسب و کار و عملکرد مالی سازمان
        مازیار گنجو سهراب خلیلی شورینی محمود البرزی سید محمد زرگر
        همسویی استراتژی فناوری اطلاعات و کسب و کار و رابطه آن با عملکرد مالی سازمان‌ها از سابقه طولانی برخوردار است. دلیل این امر وجوه مختلف موضوع و نتایج متفاوت آن در دوره‌های زمانی و بافت‌های مختلف سازمانی است. در این مقاله سعی شده است تا رابطه بین همسویی استراتژی فناوری اطلا أکثر
        همسویی استراتژی فناوری اطلاعات و کسب و کار و رابطه آن با عملکرد مالی سازمان‌ها از سابقه طولانی برخوردار است. دلیل این امر وجوه مختلف موضوع و نتایج متفاوت آن در دوره‌های زمانی و بافت‌های مختلف سازمانی است. در این مقاله سعی شده است تا رابطه بین همسویی استراتژی فناوری اطلاعات و کسب و کار و عملکرد مالی سازمان در یک دوره زمانی 5 ساله از 1393 تا 1397 مورد بررسی قرار گیرد. از نظریه پیکربندی در مدیریت استراتژیک برای توسعه مدل مفهومی و فرضیات پژوهش استفاده شد. از این رو با تحلیل داده‌های بدست آمده، استراتژی فناوری اطلاعات در سه پیکره‌ی رفتار توسعه‌ای، رفتار نوآورانه و رفتار محافظه‌کارانه و استراتژی کسب و کار در چهار پیکره‌ی نوآران، مدافعان هزینه، مدافعان تمایز و تحلیل‌گران پیکربندی شدند. فرضیه‌های پژوهش چگونگی رابطه بین ترکیب پیکره‌ها و عملکرد مالی سازمان است. از این رو از دو روش آزمون همسویی به منزله همبستگی و همسویی به منزله گشتالت استفاده شد. در آزمون همبستگی روابط بین ترکیب‌ها از ادبیات تحقیق استخراج شد و در روش گشتالت ترکیب پیکره‌ها به صورت اکتشافی با داده‌های مسئله بدون پیش‌فرض ادبیات تحقیق انجام گرفت. نتایج آزمون همبستگی نشان داد که به جز رابطه بین پیکره محافظه‌کارانه و مدافع هزینه دیگر روابط با عملکرد رابطه معناداری ندارند. در روش گشتالت دو خوشه بدست آمد که خوشه اصلی با عملکرد بالا عمدتاً ترکیبی از استراتژی‌های نوآران، مدافع تمایز از سمت کسب و کار و استراتژی‌های نوآرانه و توسعه‌ای از سمت فناوری اطلاعات است. تفاصيل المقالة