List of Articles Finite Element

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Numerical and Experimental Investigation on the Effect of Geometric Discontinuity on Frequency Response of Composite Lattice Conical Structures
  M. R Zamani M Zaretabar
  10.22034/jsm.2021.1927323.1689
  20.1001.1.20083505.2022.14.4.4.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
  A Shiri A Heidari
  10.22034/jsm.2019.668764
  20.1001.1.20083505.2019.11.4.4.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Stress Concentration Factor of Single-Layered Graphene Sheets Containing Elliptical Vacancies
  S.K Jalali M.J Beigrezaee
  10.22034/jsm.2019.667250
  20.1001.1.20083505.2019.11.3.15.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
  M.H Yas H Shahrani Korani F Zare Jouneghani
  10.22034/jsm.2019.584854.1394
  20.1001.1.20083505.2020.12.1.6.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Influence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
  R Prabhu Sekar R Ravivarman
  10.22034/jsm.2019.664230
  20.1001.1.20083505.2019.11.1.15.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
  20.1001.1.20083505.2019.11.4.10.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Noise Effects on Modal Parameters Extraction of Horizontal Tailplane by Singular Value Decomposition Method Based on Output Only Modal Analysis
  P Jalali S Varahram R Hassannejad M.H Sadeghi
  10.22034/jsm.2019.666809
  20.1001.1.20083505.2019.11.3.16.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - An Efficient Finite Element Formulation Based on Deformation Approach for Bending of Functionally Graded Beams
  H Ziou M Himeur H Guenfoud M Guenfoud
  10.22034/jsm.2019.1867884.1437
  20.1001.1.20083505.2020.12.2.7.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Fatigue Crack Growth in Plastically Compressible Solids: Role of Negative Stress Ratio, Plastic Compressibility and Strain Softening
  Y Mittal D Khan S Pandey G.Chand Gupta
  10.22034/jsm.2020.1899251.1587
  20.1001.1.20083505.2020.12.4.12.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - A New Numerical Study Method of Thermal Stress Distribution and Tortuosity Effectiveness in an Anode Porous Electrode for a Planar Solid Oxide Fuel Cell
  I.E Fahs M Ghasemi
  10.22034/jsm.2019.1870627.1455
  20.1001.1.20083505.2020.12.1.16.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
  S Hamioud S Khalfallah S Boudaa
  10.22034/jsm.2020.1879476.1503
  20.1001.1.20083505.2020.12.3.9.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - On Validity of Analytical Method in Cracked Column Post-Buckling Analysis Using Empirical and Numerical Investigations
  K Salmalian A Alijani H Ramezannejad Azarboni
  10.22034/jsm.2020.1904760.1623
  20.1001.1.20083505.2022.14.2.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Static Analysis and Fatigue of DHS Implants to Treatment Femoral and Intertrochanteric Neck Fractures Using Ti6Al4V and SS316 Alloys, A Finite Element Analysis
  A Shokrgozar Navi S Etemadi Haghighi M Haghpanahi A Momeni
  10.22034/jsm.2021.1921808.1675
  20.1001.1.20083505.2022.14.3.4.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Fatigue Life Assessment for an Aluminum Alloy Piston Using Stress Gradient Approach Described in the FKM Method
  H Ashouri
  10.22034/jsm.2021.1898031.1582
  20.1001.1.20083505.2022.14.1.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Fatigue Life Analysis of the Propeller Shafting System of a VLCC Ship Powertrain System Using Finite Element or Distributed-Lumped Methods
  A Gholami S. A Jazayeri Q Esmaili
  10.22034/jsm.2021.1924081.1683
  20.1001.1.20083505.2022.14.2.4.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - New Two 20-Node High-Order Finite Elements Based on the SFR Concept for Analyzing 3D Elasticity Problems
  H Djahara K Meftah L Sedira A Ayadi
  10.22034/jsm.2021.1942740.1718
  20.1001.1.20083505.2022.14.2.8.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Mixed-Mode Stress Intensity Factors for Surface Cracks in Functionally Graded Materials Using Enriched Finite Elements
  J Sheikhi M Poorjamshidian S Peyman
  20.1001.1.20083505.2015.7.1.1.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Multiscale Analysis of Transverse Cracking in Cross-Ply Laminated Beams Using the Layerwise Theory
  W Jin Na J.N Reddy
  20.1001.1.20083505.2010.2.1.1.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Thermal Vibration of Composites and Sandwich Laminates Using Refined Higher Order Zigzag Theory
  A Chakrabarti S.K Singh A.H Sheikh
  20.1001.1.20083505.2013.5.1.4.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Buckling Analysis of Rectangular Functionally Graded Plates with an Elliptic Hole Under Thermal Loads
  R Rezae A.R Shaterzadeh S Abolghasemi
  20.1001.1.20083505.2015.7.1.4.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Creep Life Forecasting of Weldment
  J Jelwan M Chowdhry G Pearce
  20.1001.1.20083505.2011.3.1.4.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Analytical and Numerical Investigation of FGM Pressure Vessel Reinforced by Laminated Composite Materials
  A.R Ghasemi A Kazemian M Moradi
  20.1001.1.20083505.2014.6.1.4.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Hygrothermal Analysis of Laminated Composite Plates by Using Efficient Higher Order Shear Deformation Theory
  S.K Singh A Chakrabarti
  20.1001.1.20083505.2011.3.1.7.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Nonlinear Finite Element Analysis of Bending of Straight Beams Using hp-Spectral Approximations
  R Ranjan
  20.1001.1.20083505.2011.3.1.8.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - A Comparative Study of Least-Squares and the Weak-Form Galerkin Finite Element Models for the Nonlinear Analysis of Timoshenko Beams
  W Kim J.N Reddy
  20.1001.1.20083505.2010.2.2.1.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets
  M Kadkhodayan H Aleyasin
  20.1001.1.20083505.2015.7.2.3.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Nonlinear Finite Element Eccentric Low-Velocity Impact Analysis of Rectangular Laminated Composite Plates Subjected to In-phase/Anti-phase Biaxial Preloads
  M Shariyat M Moradi S Samaee
  20.1001.1.20083505.2012.4.2.6.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - A New Eight Nodes Brick Finite Element Based on the Strain Approach
  Kh Guerraiche L Belounar L Bouzidi
  20.1001.1.20083505.2018.10.1.14.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
  A.R Shahani M.R Amini
  20.1001.1.20083505.2011.3.3.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
  S.S Bhadauria K.K Pathak M.S Hora
  20.1001.1.20083505.2010.2.3.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - hp-Spectral Finite Element Analysis of Shear Deformable Beams and Plates
  R Ranjan J.N Reddy
  20.1001.1.20083505.2009.1.3.8.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Dynamics Analysis of the Steady and Transient States of a Nonlinear Piezoelectric Beam by a Finite Element Method
  M Jabbari M Ghayour H.R Mirdamadi
  20.1001.1.20083505.2016.8.2.2.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Investigation of Vacancy Defects on the Young’s Modulus of Carbon Nanotube Reinforced Composites in Axial Direction via a Multiscale Modeling Approach
  M.R Davoudabadi S.D Farahani
  20.1001.1.20083505.2010.2.3.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
  P.C Gope S.P Sharma A.K Srivastava
  20.1001.1.20083505.2010.2.3.5.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - A New Finite Element Formulation for Buckling and Free Vibration Analysis of Timoshenko Beams on Variable Elastic Foundation
  A Mirzabeigy M Haghpanahi R Madoliat
  20.1001.1.20083505.2017.9.2.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Bending Analysis of Composite Sandwich Plates with Laminated Face Sheets: New Finite Element Formulation
  M.O Belarbi A Tati
  20.1001.1.20083505.2016.8.2.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - A Rapidly Convergent Nonlinear Transfinite Element Procedure for Transient Thermoelastic Analysis of Temperature-Dependent Functionally Graded Cylinders
  M Shariyat
  20.1001.1.20083505.2009.1.4.5.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - On the Analysis of FGM Beams: FEM with Innovative Element
  M Zakeri A Modarakar Haghighi R Attarnejad
  20.1001.1.20083505.2016.8.2.9.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
  H Bakhshi H.R Ronagh
  20.1001.1.20083505.2017.9.2.10.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Analysis of Laminated Soft Core Sandwich Plate Having Interfacial Imperfections by an Efficient C0 FE Model
  R.P Khandelwal A Chakrabarti P Bhargava
  20.1001.1.20083505.2012.4.4.3.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
  F Javidrad M Mashayekhy
  20.1001.1.20083505.2014.6.4.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Wave Propagation in Sandwich Panel with Auxetic Core
  D Qing-Tian Y Zhi-Chun
  20.1001.1.20083505.2010.2.4.7.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - The Prediction of Forming Limit Diagram of Low Carbon Steel Sheets Using Adaptive Fuzzy Inference System Identifier
  H Aleyasin
  20.1001.1.20083505.2017.9.3.3.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Mechanical Buckling Analysis of Composite Annular Sector Plate with Bean-Shaped Cut-Out using Three Dimensional Finite Element Method
  H Behzad A.R Shaterzadeh M Shariyat
  20.1001.1.20083505.2018.10.3.2.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Spectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory
  M.R Bahrami S Hatami
  20.1001.1.20083505.2017.9.3.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
  R Hosseini M Hamedi
  20.1001.1.20083505.2016.8.3.7.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
  H Heirani Kh Farhangdoost
  20.1001.1.20083505.2017.9.3.10.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Analytical and Numerical Modelling of the Axisymmetric Bending of Circular Sandwich Plates with the Nonlinear Elastic Core Material
  A Kudin S Choporov Yu Tamurov M.A.V Al Omari
  20.1001.1.20083505.2016.8.3.10.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - A New Approach to Buckling Analysis of Lattice Composite Structures
  S.A Galehdari A.H Hashemian J.E Jam A Atrian
  20.1001.1.20083505.2017.9.3.11.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Modal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
  K.R.P Babu B.R Kumar K.M Rao
  20.1001.1.20083505.2016.8.3.12.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - An Efficient Strain Based Cylindrical Shell Finite Element
  M Bourezane
  20.1001.1.20083505.2017.9.3.14.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Free Vibration of Functionally Graded Cylindrical Shell Panel With and Without a Cutout
  k.S Sai Ram K Pratyusha P Kiranmayi
  20.1001.1.20083505.2018.10.3.16.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Ductile Failure and Safety Optimization of Gas Pipeline
  P Zamani A Jaamialahmadi M Shariati
  20.1001.1.20083505.2016.8.4.5.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Three-Dimensional Finite Element Analysis of Stress Intensity Factors in a Spherical Pressure Vessel with Functionally Graded Coating
  H Eskandari
  20.1001.1.20083505.2017.9.4.5.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Analyzing Frequency of Conical (∆ shaped) Tanks
  F Saljughi
  20.1001.1.20083505.2016.8.4.7.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Dynamic Simulation and Mechanical Properties of Microtubules
  M Motamedi M Mosavi Mashhadi
  20.1001.1.20083505.2016.8.4.8.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Free and Forced Transverse Vibration Analysis of Moderately Thick Orthotropic Plates Using Spectral Finite Element Method
  M.R Bahrami S Hatami
  20.1001.1.20083505.2016.8.4.15.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Extended Finite Element Method for Statics and Vibration Analyses on Cracked Bars and Beams
  F Mottaghian A Darvizeh A Alijani
  20.1001.1.20083505.2018.10.4.15.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
  S Rouhi R Ansari A Nikkar
  20.1001.1.20083505.2018.10.4.16.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Simulating And Validating The Pressure Profile During The Filling And Packing Phases of Injection Molding
  Laura Stuart Ma'moun Abu-Ayyad
  https://doi.org/10.60664/jsm.2024.1106606
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Numerical Implementation of A Nonlocal Damage Model For A Stress Regime-Dependent Creep Constitutive Model
  Behzad Dastgerdi Mostafa Baghani
  https://doi.org/10.60664/jsm.2024.1129238