List of Articles Stress

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Genetic Algorithm and ANN for Estimation of SPIV of Micro Beams
  M. Heidari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluating the Effects of Overload and Welding Residual Stress in Fatigue Crack Propagation
  Ali Moarefzadeh Shahram Shahrooi Mehdi Jalali Azizpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Thermo-Elastic and Time-Dependent Creep Evolution Behaviour of Ferritic Steel Rotating Disks using Theta Projection Concept
  H. Daghigh V. Daghigh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method
  M. R. Karamooz-Ravari B. Shahriari E. Seyfali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Analysis of Stresses in Tapered Rectangular Utility Pole
  Kondapalli Siva Prasad Chinthada Mankanteswar Rao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
  Sina Sazesh Aazam Ghassemi Reza Ebrahimi Mohammad Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock
  N. Nayebpashaee H. Vafaeenezhad S. M. M. Hadavi S. H. Seyedein M. R. Aboutalebi H. Sarpoolaky
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure
  O. Sam Daliri M. Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
  Mohammad morad Sheikhi Hamidreza Shamsolhoseinian Rasool Moradi dastjerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
  Davood Azadi Nosratollah Solhjoei SayedAli Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Prediction of Residual Stresses by Radial Basis Neural Network in HSLA-65 Steel Weldments
  M. Heidari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method
  Mohammad Reza Niroomand Farzad Boroomand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Preliminary Analysis of the Cladding Mechanical Behavior of a Nuclear Superheat Boiling Water Reactor
  Majid Bahonar Gholamreza Jahanfarnia Morteza Gharib
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Effect of Burr Grinding on Fatigue Strength of Steel Butt-Welded Connections
  Abbas Fadaei Annette Betkhoodu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Evaluation of S/N Diagram in Welded Joints Based on Different Fatigue Failure Criteria
  Saeed Jouzdani Ali Heidari
  10.30495/admt.2020.1885273.1164
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Effect of TID-dressing on Fatigue Life Stress Concentration Factor in St37-2Butt Weldments
  Abbas Fadaei Mostafa Jalalizadeh Faeze Mohammad Zaheri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Fatigue Crack Growth in Thin-Wall Pipes Subjected to Bending
  MohammadMahdi Amiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Investigation of Magnitude and Position of Maximum von Mises Stress in The Cylindrical Contact Problems
  Hasan Heirani Reza Naseri
  10.30486/admt.2023.1967679.1379
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Investigation of Compressive Stresses of Stainless Steel 316L Diamond Lattice Structures Under the Effect of Spherical Connections Produced by SLM Additive Manufacturing
  Behnam Ahmadi Roozbahani AliAkbar Lotfi Neyestanak
  10.30486/ADMT.2024.1966579.1377
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Studying the Effect of Pulse Shape on Dynamic Stress Intensity Factor at the Finite Crack Tip using Displacement Fields
  Hossein Rahmani Mohammad Ahmadi Balootaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Design of Structure for a Heavy Duty Mineral Tow Machine by Evaluating the Dynamic and Static Loads
  Mehdi Akhondizadeh Meysam Atashafrooz
  10.30486/admt.2023.1962820.1365
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer
  Hamidreza Nadri Mahdi Shaban Abbas Pak
  10.30495/admt.2021.1904847.1204
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Design and Analysis of Bicycle Helmet Made of PETg and ABS with Honeycomb Structure Against External Impacts using Abaqus Software
  sajjad pakzad ahad shah hoseini Maryam Dehghani amir bahador khalkhali
  10.30495/admt.2021.1896746.1185
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Evaluation of Mixed-Mode Center Crack SIF in a Curved Plate Repaired by Stop Holes, Composite Patch, and Hybrid Methods
  Sirvan Mohammadi sadegh daryaei
  10.30486/admt.2022.1947527.1329
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint
  Asghar Mahdian Arash Babamiri Behrooz Shahriari
  10.30486/admt.2022.1934601.1296
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Experimental Correlation Between Microstructure, Residual Stresses and Mechanical Properties of Friction Stir Welded 2024-T6 Aluminum Alloys
  Majid Farhang Mohammadreza Farahani Mohammad Nazari O. Sam Daliri
  10.30486/admt.2022.1943845.1322
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM)
  Pooya Bahrami Ali Khoshanjam Abdolhamid Azizi
  10.30495/admt.2021.1921815.1247
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method
  Behzad Bayati Chaleshtori Ali Hajiahmad Seyed Saeid Mohtasebi
  10.30495/admt.2021.1916102.1230
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Bending and Buckling Analysis of a Nth-Order Shear Deformation Nanoplate using Modified Couple Stress Theory
  Majid Eskandari shahraki mahmoud shariati naser asiaban
  10.30495/admt.2021.1915086.1229
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution
  Parham Rajabi Hossein Rahmani Alireza Amiri
  10.30495/admt.2021.1908681.1216
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Removing Residual Stress and Increasing Fatigue Life by Ultrasonic Method
  Ali Moarefzadeh
  10.30495/admt.2021.1907388.1213
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Bending and Vibration Analysis of a Mindlin Rectangular Nanoplate using Modified Couple Stress Theory and Navier's Solution
  Majid Eskandari Shahraki Mahmoud Shariati naser asiaban
  10.30486/admt.2021.1923209.1252
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Improving High Cycle Fatigue Life in A Gasoline Engine Piston using Oil Gallery with Considering Stress Gradient
  Hojjat Ashouri
  10.30495/admt.2021.1925054.1258
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Improving High Cycle Fatigue Life in An Exhaust Manifold Using Perimeter Fins with Considering Stress Gradient
  Hojjat Ashouri
  10.30486/admt.2023.1977279.1396
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Investigating the Effect of Process Parameters on Reducing the Peeling Stress in Adhesive Joints of Composite Materials
  Saeed Yaghoubi Mohammad Shishehsaz Kiamehr Rouzbakhshzadeh
  10.30486/admt.2023.1971084.1387
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - A Quasi-Analytical Method Algorithm Development in Redesigning the Geometry and Structural Analysis of An Aircraft Propeller and Comparing with the Finite Element Method
  Behrooz Shahriari Hassan Izanlo Nedasadat  Seddighi
  10.30486/ADMT.1403.873792