About the journal
The Journal of Solid Mechanics (JSM) is a quarterly journal which is dedicated to the publication of original and peer-reviewed papers relating to the mechanics of solids and structures. This influential publication covers a broad area of mechanical engineering activities associated with the classical problems of structural analysis to mechanics of solids, fracture mechanics, heat transfer, thermal effects in solids, optimum design methods, and numerical techniques.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
All submitted manuscripts are checked for similarity through iThenticate software to ensure their authenticity and originality and then rigorously peer-reviewed by the expert reviewers.
Article Processing Charges
According to the executive instructions of the financial support of Islamic Azad University scientific journals(10/62815-2019), in case of initial approval by the editor, for sending each article for judging, the amount of 1/000/000 Rials and after the final approval, the amount of 3/000/000 Rials will be recieved from the esteemed authors for publication of the article.
It should be noted that if the article be rejected by the esteemed judges, the initial payment cannot be returned to the author. For foreigners the article processing charges is 50$ for final approval step.
-
Open Access Article
1 - Stress generation due to Moving Load on gravitational magneto-elastic orthotropic half-space with parabolic irregularity
Nidhi Dewangan * ، Sanjeev A Sahu ، Soniya ChaudharyIssue 1 , Vol. 17 , Winter 2025 -
Open Access Article
2 - Free Damped Vibration Analysis of Sandwich Plates with CNT-Reinforced MRE Core and Laminated Three-Phase Polymer/GPL/Fiber Face Sheets
A Karbasizadeh ، A Ghorbanpour Arani * ، Sh Niknejad ، Z Khoddami MaraghiIssue 1 , Vol. 17 , Winter 2025 -
Open Access Article
3 - Experimental Investigation of Heat Treatment Effects on Mechanical Properties and Microstructure of AA6063 Alloy in ECAP Process
Hossein Tamim * ، Mohammad Javad Saleh ParhizkarIssue 1 , Vol. 17 , Winter 2025 -
Open Access Article
4 - Controlling the Basal Texture for Significant Improvements in Mechanical Properties of AZ91D Mg Sheets Using Elevated-Temperature Constrained Groove Pressing
Sadegh Ghorbanhosseini * ، Faramarz Fereshteh Saniee ، Ali SonboliIssue 1 , Vol. 17 , Winter 2025 -
Open Access Article
5 - Mixed-Mode Transient Analysis of Multiple Interface Cracks Between Half-Plane and Functionally Graded Layer
M. Rezaei Rased ، R. Bagheri * ، R. JamalpourIssue 1 , Vol. 17 , Winter 2025
-
Open Access Article
1 - The Frequency Response of Intelligent Composite Sandwich Plate Under Biaxial In-Plane Forces
A. A Ghorbanpour-Arani ، Zahra Khoddami Maraghi ، Ali Ghorbanpour Arani *Issue 1 , Vol. 15 , Winter 2023 -
Open Access Article
2 - Analysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation
A Ghorbanpour Arani * ، M Emdadi ، H Ashrafi ، M Mohammadimehr ، S Niknejad ، A.A Ghorbanpour Arani ، A HosseinpourIssue 4 , Vol. 11 , Autumn 2019 -
Open Access Article
3 - Influence of the Imperfect Interface on Love-Type Mechanical Wave in a FGPM Layer
S Chaudhary * ، A Singhal ، S.A SahuIssue 1 , Vol. 11 , Winter 2019 -
Open Access Article
4 - Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
M.H Yas * ، H Shahrani Korani ، F Zare JouneghaniIssue 1 , Vol. 12 , Winter 2020 -
Open Access Article
5 - Analysis of Reflection Phenomena in a Fiber Reinforced Piezo-Thermoelastic Half Space with Diffusion and Two-Temperature
K Jain * ، S Kumar ، S DeswalIssue 4 , Vol. 12 , Autumn 2020 -
Open Access Article
6 - Investigation of Vacancy Defects on the Young’s Modulus of Carbon Nanotube Reinforced Composites in Axial Direction via a Multiscale Modeling Approach
M.R Davoudabadi * ، S.D FarahaniIssue 3 , Vol. 2 , Summer 2010 -
Open Access Article
7 - Free Vibration Analysis of Bidirectional Functionally Graded Conical/Cylindrical Shells and Annular Plates on Nonlinear Elastic Foundations, Based on a Unified Differential Transform Analytical Formulation
M Molla-Alipour ، M Shariyat ، M Shaban *Issue 2 , Vol. 12 , Spring 2020 -
Open Access Article
8 - Dynamic Behavior of Anisotropic Protein Microtubules Immersed in Cytosol Via Cooper–Naghdi Thick Shell Theory
M.R Ghorbanpour Arani * ، Z Khoddami Maraghi ، E HaghparastIssue 4 , Vol. 10 , Autumn 2018 -
Open Access Article
9 - A Study on Stiffness of a Defective Rippled Graphene Using Molecular Dynamics Simulation
Amin Hamzei * ، Emad Jomehzadeh ، M Rezaeizadeh ، M MahmoodiIssue 2 , Vol. 15 , Spring 2023 -
Open Access Article
10 - On Static Bending, Elastic Buckling and Free Vibration Analysis of Symmetric Functionally Graded Sandwich Beams
A.S Sayyad * ، P.V AvhadIssue 1 , Vol. 11 , Winter 2019
