List of Articles Milling

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Electrical conduction in nanoceramic PGT synthesised by high energy ball milling
  SKS Parashar Satyendra Narayan Singh Mahmood Ghoranneviss Swarat Chaudhuri
  10.1186/2251-7235-7-26
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM
  Mahmoud Moradi Reza AbbasiRad Majid Ghoreishi Hadi Abdollahi Majid Rostami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Investigating the Performance of Coated Carbide Insert in Hard Steel Helical Milling
  Navid Molla Ramezani Behnam Davoodi Mojtaba Rezaee Hajideh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Experimental Study of the Effect of Variable Pitch in Indexable Cutting Tool on AISI4140 Steel Surface Finish in Milling
  Behrouz Mahdikhani Mehrdad Javadi
  10.30495/admt.2020.1890458.1166
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Compare the performance of portable pneumatic cutting device electrodes made ​​of Iran and its external sample
  reza mazinani زینب بهمن آبادی رضا راه چمنی مهدی مزینانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Parameters change effect of cutting tool diameter, depth of cut and feed rate in the process of turbine blade 4 axis milling on the roughness and surface texture
  Amir Alinaghizadeh Behrouz Norouzi Ali Farahmandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Effect of Ball Screw linear expansion of linear axes on the movement of rotary axes and workpiece geometric accuracy in five-axis CNC milling machine with rotational head and RTCP active option
  Amir Alinaghizadeh Meysam Khaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - CNC milling stability prediction method hallways full third order discretization
  Salman Paknazar Mohammad Jafar Ostad Ahmad Ghorabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Effect of Different Irrigation Regimes on Agronomic Characteristics and Grain Quality in Selected Rice Genotypes (Oryza sativa L.)
  Masoumeh Habibi Pooria Mazloom Morteza Nasiri Ali Eftekhari Morteza Moballeghi
  10.30495/JCEP.2023.1926035.1785
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder
  Maryam shojaie bahaabad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
  Minoo Karbasi Maryam Karbasi Ali Saidi Mohammad Hossein fathi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2
  Ali Motavalli Mohammad Rajabi Alireza Gholipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling
  Ali Bashirisafa Akbar Heidarpour Samad Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles
  mohamed saad iman ghoneim Al-Sayed Al-Sherbini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying
  Parisa Fekri Dolatabad Vahid Pouyafar Ramin Meshkabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant
  Sara Kashisaz Zahra Basiri Paknafs Ahmad Riahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling
  Hossein Jalali Asbforoshani Hamid Soleimanimehr Shahram Etemadi Haghighi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
  Hassan Gheisari Ebrahim Karamian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Design, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool
  Mostafa Rabi Yeganeh Aminolah Mohammadi Hamed Ghafarirad Mehdi Meskin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel
  Navid Molla Ramezani Mojtaba Rezaei Hajideh Ali Shahmirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Perceived Effectiveness of Japan International Cooperation Agency (Jica)-Rice Processing Technologies Utilization among Rice Processors in Kogi State, Nigeria
  Olufemi Bolarin Sijuade Adebayo Rebecca Akubo Sola Komolafe
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Improvement of CL soil engineering properties by using of silica and kaolinite nanoparticles
  Moharram Majidi Ali Uromeihy Mohammad Reza Nikudel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
  Masoud Azadi Moghaddam Farhad Kolahan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - On the use of back propagation and radial basis function neural networks in surface roughness prediction
  Angelos P. Markopoulos Sotirios Georgiopoulos Dimitrios E. Manolakos
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Study of heat stress on rice cultivars grain milling quality in North Khuzestan
  A. Gilani S. A. Siadat S. Jalali K. Limouchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Effect of silver nanoparticles on the crystallinity of polyethylene
  مریم ابارشی سکینه مسگر شاهرودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Fabrication of Al2O3/SiC Nanoparticles from the Rice Hush Ash via Self-Propagation High-Temperature Synthesis and Ball Milling
  قاسم دینی Morteza Hoseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Synthesis and characterization of (Fe,Ti)3Al-Al2O3 nanocomposite via Fe2O3 reduction by Al
  M. Rafiei M.H. Enayati F. Karimzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Carbothermic reduction of nickel oxide
  Sahar S. Bakhshandeha Nader Setoudeh Mohammad Ali Askari Zamanic Abbas Mohassel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation of Electromagnetic Properties and Microwave Absorption of Z-Type HexFerrite with Zinc Substitution
  zinat mirzaei mohammad jazirehpour ahmad poorbafrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Investigation of Optimal Milling Conditions in the Production of Mg-3Zn-1Mn Nanocomposite
  Saeid jabbarzare Hamid Reza Bakhsheshi Rad Amirabbas Nourbakhsh tahmine ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - The Effect of Gd Cation Substitution on the Structural and Electromagnetic Properties of Z-Type Barium Hexaferrite
  Mohammad Jazirehpour Ahmad Poorbafrani Zinat Mirzaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Influence of mechanical alloying and preheating on fabrication of NiTi alloy by combustion synthesis
  Ali Reza Sadegi Aval Shahr Hassan Mostajab o daveh Abolfazl Babakhani Mojtaba Zebarjad Akram Salehi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - بررسی تأثیر استراتژیهای فرزکاری در ماشینکاری سطوح محدب از جنس کامپوزیت شیشه/اپوکسی
  هادی محمدی هادی اسکندری ایمان دانایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Review of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling
  F. Fardi Pour M. Najafi Anaraki M. Karmian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - مطالعه تأثیر استفاده از نانوسیال برای خنک‌کاری در فرایند فرزکاری جهت بهبود پارامترهای ماشینکاری
  احمد افسری امیرحسین زارعی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - پیش بینی سطح ایجاد شده در فرایند فرزکاری با ابزارهای سرتخت و سرکروی
  محمد رضا موحدی امیر جدیری فیضی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls
  ایمان Farahbakhsh مهدی Shahedi Asl بهزاد Nayebi صاحبعلی Manafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions
  Nader Setoudeh ataollah nosrati Nicholas J. Welham
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture
  Nilofar Ghani Kolahloo Nader Setoudeh Abbas Mohassel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method
  Sadegh Ali Hasanzadeh Taghi Isfahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics
  Hajar Ahmadimoghadam Mohammad Hossein Paydar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide
  Fatemeh Homayooni Nader Setoudeh Abbas Mohassel Fatemeh Heidari Mohammad Sajjadnejad
  10.30495/jnm.2021.29247.1942
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Synthesis of strontium titanate from celestite concentrate
  Leila Ehrambaf Nader Setoudeh Mohammad Ali Askari Zamani raziye hayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method
  Hadi Rezazadeh Maziyar Azadbeh
  10.30495/jnm.2023.32501.2015
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers
  S. Karimi S. Javadpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers
  S. Karimi S. Javadpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders
  A. Seifolazadeh S. Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process
  A.H. Yaghtin S. Javadpour M.H. Shariat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy
  نفیسه Talavari Kh Gheisari محسن ریحانیان Reihanian