List of Articles Design

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Data-based Probe for Bearing Balls using Design Expert with Biodegradable Media
  Saurabh Malpotra
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
  Mahmoud Moradi Hadi Abdollahi Ali Khorram
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation
  M. Soleimanzadeh M.M. Fallah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Design, Manufacture and Environmental Tests of Battery Pack for Spacecraft Freights
  Hossein Bolandi Moharram Ghahremani Darvish Masoud Hasanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects
  A. Hojjati Najafabadi S. Amini F. Farahmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - An Intelligent Knowledge Based System for CO2 Laser Beam Machining for Optimization of Design and Manufacturing
  Morteza Sadegh Amalnik
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Expert System Approach for Manufacturability Evaluation of Nd: YAG Laser Beam Machining Process
  M. Sadegh Amalnik*
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Bone Surface Model Development Based on Point Clouds Extracted From CT Scan Images
  I. Asheghi Bonabi S. J. Hemmati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Evaluation of Parameters Affecting Magnetic Abrasive Finishing (MAF) of Superalloy Inconel 718
  Mehrdad Vahdati SeyedAlireza Rasouli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method
  Mohammad Reza Niroomand Farzad Boroomand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies
  Mahdi Ebrahimzadeh Ali Galehdari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process
  Ali Vakili Sohrforozani Masoud Farahnakian Mohammad Sajjad Mahdieh Amir Masoud Behagh Omid Behagh
  10.30495/admt.2020.1889912.1165
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Design of Structure for a Heavy Duty Mineral Tow Machine by Evaluating the Dynamic and Static Loads
  Mehdi Akhondizadeh Meysam Atashafrooz
  10.30486/admt.2023.1962820.1365
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Design, Modeling and Manufacturing a New Robotic Gripper with High Load Bearing Capability and Robust Control of its Mechanical Arm
  vahid Boomeri Hami Tourajizadeh
  10.30495/admt.2021.1872367.1131
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Optimal Routing of Rocket Motion using Genetic Algorithm and Particle Swarm Optimization
  Reza Tarighi M.H. Kazemi mohammad hosein khalesi
  10.30486/admt.2022.1947306.1327
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Design and Optimization of Gasketed-Plate Heat Exchanger using Bees Algorithm
  Navid Bozorgan Ashkan Ghafouri Ehsanolah Assareh Seyed Mohammad Safieddin Ardebili
  10.30495/admt.2021.1907203.1211
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Redesign and Accuracy Improvement of Disposable Infusion Pumps
  sajjad pakzad ahad shah hoseini Hossein Rashid Myab Amirhossein Vazirpanah
  10.30486/admt.2022.1938173.1308
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Experimental Analysis of Effective Parameters on the Bowing Defect of Symmetrical U-Section in Roll Forming Production
  Amin Poursafar Saeid Saberi Rasoul Tarkesh Esfahani Meisam Vahabi Javad Jafari Fesharaki
  10.30486/admt.2023.1960408.1355
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Bending Optimization of Composite Sandwich Panels with Second-Order Corrugated Cores
  Mahdi Shaban Sanaz Khoshlesan Mohammad sajad Shamsi monsef
  10.30486/ADMT.2024.873760
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - A Study on The Effects of Different Pad Materials on Brake System Performance of a High-Capacity Elevator by FEM Simulation
  Mohammad  Sajjad Mahdieh Farshad Nazari Ali Riyadh  Khairullah
  10.30486/ADMT.2023.873808
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Determination of Reinforcement Learning Reward Parameters to Solve Path Planning of Unknown Environments by Design of Experiments
  issa Alali Alfares Ahmadreza Khoogar
  10.30486/ADMT.2024.1126477