List of Articles لیزر

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Examining the Effects of Consumers' Personality Traits on Buying Behavior in Retail Stores by Structural Equation Model
  M. Samadi H. Farsizadeh M. Nurani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - تأثیر پارامترهای فرآیند لیزر بر ویژگی‌های هندسی سوپرآلیاژ آلومینیومی Inconel738 با روکش لیزری
  bita mottaghi golshan mohammad mehdi Hadavi monireh ganjali
  10.30495/jptc.2021.20404
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - The effect of helium neon laser irradiation on the morphology of small intestine of hatched broiler chicks
  هادی ابوالحسنی جمشید قیاسی قلعه کندی علیرضا احمدزاده جواد حیدربیگی ممقانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Compare the effect red and green low level laser light accelerates the healing of the incision in the skin after the suturing in hamsters
  GH. R. Abedi, احمد Asghari, S. Hesaraki, A. Nasireian, هادی Hajizadeh, نیما Toghani,
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Suspended sediment particle size distribution in Kojour river
  Seyed Hamidreza Sadeghi Mohamad Ali Zakeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - The Effects of Continuous Waves (CW) Lasers Within Visible Range on the Physicochemical Properties of Egg Albumen
  razagh Mahmudi Mohammad Saeid Hosseinzade ebrahim safari Mirhassan Musavi Peyman Zare Amir Fakhri Yashar Farshi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - 4
  دینا ایزدی فرشته حاج اسماعیل بیگی حسین مروتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Investigation of Soliton phenomena for laser transfer in optical fibers and its application in tissue treatment
  zahra mahmoodzadeh zarandi parviz zobdeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Preparation of Tantalum Pentoxide Nanoparticles by Laser Ablation and Design of Nano biosensor as its Application
  M. Yousefi M.R. Hantehzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Design and Construction of Simmer Circuit in Order to Drive Flash Lamp in Solid State Laser
  Majid Zamani
  10.30486/teeges.2023.1972034.1047
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Extraction of the Key Dimensions of Knowledge Sharing
  Masoume Sadat Mousavi Hessam Zandhessami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Compared with methods for measuring speed (LDA, HWA, PIV)
  Hadi Kargar Sharifabad میکائیل فراتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Investigation and Optimization Of the Parameters Affecting the Strength Of Nd:YAG Pulsed Laser Spot Welding in Steel Sheet Using Design Of Expriment
  Abbasali Habibollahi Nasrollah Bani mostafa Arab Ali Dehghani Amir Alinaghizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Assessing the Satisfaction of East Azerbaijan Power Distribution Company Employees (Providing Measurement Model)
  Iraj Badr Sajjad Mesgarzadeh Khadijeh Jafari Mohammad Mirzakhani Ahad Haji Boland
  10.30495/jss.2019.666676
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Histopathologic study of the effect of low level Gallium-Arsenide laser on healing of grade 3 cutaneous burns in the rat
  siamand bastani علی rezaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Photobiological effects of helium neon laser on hematologic and biochemical factors of rabbit blood
  جعفر Rahmani Kahnamoei Sh Safi رسول Sadighi bonabi ایرج Sohrabi Hagdust M.H Khayat Nouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Determining The Dimensions of Service Quality in Banking Industry: Examining The Gronroos Model in Pasargad Banks of the Northwest of Iran
  Soleyman Iranzadeh Hossien Emari Saeed Bakhshayesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Investigating the Relationship between Market-Orientation and Competitive Advantages in Iran Tractor Manufacturing Industrial Group
  Mohammad Faryabi Rana Tajvidi Mina Tajvidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Optimization in effect of laser light on increasing the rate of wheat germination
  محسن Abbasi مجید Ebrahimizadeh abrishami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Relationship between Emotional Intelligence and Translation Competence in Iranian Translation Studies Students: Modeling and Non-modeling Approaches
  Narjes Ghafournia
  10.30495/jfl.2023.703295
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Optimizing the Cutting of Inconel 718 Sheets with CO2 Laser by Particle Swarm Algorithm
  Saeid Kiani Rasoul Tarkesh Esfahani Zahra Zojaji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Analysis of drivers of urban sprawl (Case study: Ahvaz city)
  Mahmod Arvin Ahmad Pourahmad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Review of the photodynamic therapy with the approach of different photosensitizers
  Parnia Hemmati Seyed Mehdi Tabaie Mina sadat Naderi
  10.30495/jdb.2023.1975290.1345
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - بررسی اثرات نیروی پاندرموتیو در برهمکنش لیزرپر شدت با پلاسمای مغناطیده کم چگال اتلافی
  لیلا رجایی مریم جعفری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Preparation of nanocomposites of graphene-metal-organic framework based on bismuth by laser ablation in liquid and investigation of optical properties and antibacterial activities of them
  Negar Motakef Kazemi Fereydoon Ataei Davoud Dorranian
  10.30495/jacr.2023.1972796.2066
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Synthesis of Graphene by laser method for using in electrochemical capacitors
  shahab khameneh asl Majed Namdar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks
  hossain ebrahimzadeh hassan farhangi seyed ali asghar akbari mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Pulsed laser surface melting of AISI H13 steel and investigating the effect of TiC powder particle size and concentration on the morphology of MC carbides in the composite coating
  محمدعلی بوترابی Ali Dadoo Shahram Kheirandish
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Phase, microstructure characterization and hardening efficiency of SKS3 tool steel laser surface hardened by a high-power diode laser
  Amirsalar Dehghani Amirreza Farnia Mohammad Javad Torkamany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigating optical properties, morphology and size of silver nanoparticles prepared by nanosecond Nd:YAG laser in liquid
  Ehsan Naderi-Samani Reza Shoja Razavi Mahdi Gholampour Mahdi PouladZadeh Hamed Naderi-Samani
  10.71753/ma.2024.1089865
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Effect of geometry of laser surface texture and droplet volume on contact angle with Ti6Al4V substrate
  Gholamreza Dabbagh seyed khatiboleslam Sadrnejad Reza Shoja Razavi Amirabbas Nourbakhsh Nahid Hassanzadeh Nemati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Evaluation the Effect of Heat Treatment on Solidification Structure Segregation and Mechanical Properties of Inconel 625 in the Additive Manufacturing Process by DLMD Method
  mohammad gavahian jahromi Reza Shoja Razavi hamed Naderi fareed kermani
  10.71753/ma.2024.1089975
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - بررسی اثر افزودن گاز دی اکسید کربن به گاز محافظ بر خواص جوش در جوشکاری لیزر پالسی Nd:YAG
  مصطفی جوکار فرشید مالک قاینی محمد جواد ترکمنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - The Effect of Nd-YAG Laser in Photodynamic Treatment on LN-CaP Cells
  هما محسنی کوچصفهانی محمد نبیونی محمدحسین مجلس آرا الهه امینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - بررسی اثر سرعت لیزر در خمش ورق فلزی توسط لیزر با استفاده از تحلیل عددی و تجربی در مکانیزم گرادیان حرارتی
  حسن مسلمی نائینی ولی اله پناهی زاده محمد حسین پور گللو سیامک مزدک
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Designing and Compiling a model of professional competencies of managers in controlling the country's sports crises with data Theory Foundation approach
  reza rezanejad mir hasan ameri Eskandar Hosseinpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - investigating the effect of porosity Percentage on heat transfer in plastic injection molds created by selective laser melting
  Seyed mostafa MirTabaei Afshin Judaki Morteza Taher Niya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Investigating the combustion energy of the reaction of helium ions using the acceleration of plasma blocks
  vali markani nader azizi mahdi amniat talab rahim naderali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - The effect of eight weeks of swimming training, cell and laser therapy on the expression of IL-2, IL-10 and STAT-3 genes in testicular tissue in azoospermia model rat.
  seyed sasan Hoseyni Habib Asgharpour پروین فرزانگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Effect of increasing laser-dressing parameter on electronic and optical properties of double GaAsSb/GaAs parabolic valence-band quantum well
  Soheila Haghighi Azadeh Haghighatzadeh امین عطارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Improvement of initial growth and medicinal indices of ribwort plantain (Plantago lanceolata) by physical seed primmimg
  Bahram Mirshekari Reza Siyami
  10.22034/aej.2015.520860
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC
  مریم Kazemi Sh Kheirandish حسن Saghafiyan علی Dadoo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting
  Karim Avak Maziyar Azadbeh Samira Eslami Mehdi Ojaghi
  10.30495/jnm.2024.32954.2026
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - A simple and efficient method for creating the beta phase through the selective laser melting process of Ti-10Mo powder mixed alloy; A corrosion approach
  Arezoo Pourshoja karim Avak Maziyar Azadbeh Mohammadreza Etminanfar Mehdi Ojaghi
  10.30495/jnm.2024.33378.2040
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Mechanical and Physical Properties Laser and GTA Welding of Commercial Pure Titanium
  S.GH. رضوی M. سبکتکین ریزی M. طاهری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti.
  Arezoo Pourshoja karim Avak Maziyar  Azadbeh Mohamadreza Etminanfar Mehdi  Ojaghi