A

  • Abbasi.seyed mahdi Influence of Withdrawal Rate on As-Cast Microstructure and Stress-Rupture Life of Directionally Solidified Rene80 Superalloy [ Vol.10, Issue 2 - Spring Year 2022]
  • Abbasi.seysd Mahdi Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Abbastabar Ahangar.Hossein Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • Abdi.Farhad Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • Aghajani.Hossein Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • Ahmadian.Peyman The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Ahmadvand.Shabnam Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Alafzadeh.Mina Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • amoshahi.Hamzeh A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • Asqari.zahra Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Azizi.Mojdeh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]

B

  • Bahmanpour.Maryam A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]
  • Bakhsheshi Rad.Hamid Reza Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhsheshi-Rad.Hamid Reza Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhsheshi-Rad.Hamid Reza Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]

D

  • Davoodi.anial Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Deilami Azodi.Hamed A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]

E

  • EbrahimiNaghani.Mohsen Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • elahi.hossein The Effects of Oxide Fluxes on the Penetration Depth of 316L and A516 Steels in A-TIG Welding: a Comparative Study [ Vol.10, Issue 2 - Spring Year 2022]
  • Emami.Amir Hossein Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • emami.iman Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Emami.Mohammad Effects of Fe and Si Additions on Erosion-Oxidation Behavior of Nickel Alloys in Chlorine-Containing Oxidative Atmospheres [ Vol.10, Issue 4 - Autumn Year 2022]
  • Emami.Mohammad The Effects of Oxide Fluxes on the Penetration Depth of 316L and A516 Steels in A-TIG Welding: a Comparative Study [ Vol.10, Issue 2 - Spring Year 2022]

F

  • Faraji.Ghader Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study [ Vol.10, Issue 3 - Summer Year 2022]
  • Fathi.Farshid Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • fazelinezhad.habib Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]

G

  • Ghassemi.Aazam Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery [ Vol.10, Issue 2 - Spring Year 2022]
  • Ghayour.Hamid A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]

H

  • HAKIMI.JAVAD Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Hassanzadeh Tabrizi.S.A. Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Hassanzadeh Tabrizi.S.A. Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • HassanzadehTabrizi.Ali Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • Hayashi.Shigenari Effects of Fe and Si Additions on Erosion-Oxidation Behavior of Nickel Alloys in Chlorine-Containing Oxidative Atmospheres [ Vol.10, Issue 4 - Autumn Year 2022]
  • Heidari.Ali Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • hormozi.kourosh Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • hosseini.mostafa Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery [ Vol.10, Issue 2 - Spring Year 2022]

J

  • Jabbarzare.Saied Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]

K

  • Kalantarzadeh.Fatemeh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • karamian.ebrahim Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • karamian.Ebrahim Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
  • Kargar Razi.M. Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Kasiri.Masoud Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Khameneh Asl.Shahin Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • khodaei.Milad Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Koupaei.Narjes Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]

M

  • mahmoodi.masoud Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Mahmoudsaleh.Eisa Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • Maraki.Mohamaad reza Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Merkani.Mohammad Soroush Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study [ Vol.10, Issue 3 - Summer Year 2022]
  • Mirfazli.Seyedeh Sara Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • mirmohammadi.mehrosadat A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • mohammad shafiee.mohammad reza A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • Monir Vaghefi.Sayed Mahmoud Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • monshi.ahmad Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Morakabati.Maryam The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Morakabati.Maryam Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]

N

  • Nazari Siahpoush.Ashkan Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]
  • Neghabi.Mina Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • norouzi.vahid Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]

O

  • Omidi.Mahdi Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Omidi.Mahdi Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Omidi.Meisam Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Ong.C.K. Thermal Stability and Dynamic Magnetic Properties of NiO/Fe Multilayered Thin Films Prepared by Oblique-Angle Sputtering Technique [ Vol.10, Issue 2 - Spring Year 2022]

P

  • Parvizian.Parnia The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]

R

  • Rafiei.Mahdi Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Rafienia.Mohammad Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
  • Rajabi nejad.sobhan Influence of Withdrawal Rate on As-Cast Microstructure and Stress-Rupture Life of Directionally Solidified Rene80 Superalloy [ Vol.10, Issue 2 - Spring Year 2022]
  • Rezaei-Baravati.Abouzar Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]

S

  • Sadeghi.Babak Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Saffar.Ali Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Shahriyari.Sadegh Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • soheily.Mahyar Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • Soleymani asl.Hamideh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • Soltani.Sadegh A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]

T

  • Tagimalek.Hadi Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Talebi.Amir Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]

Y

  • Yeganeh.Mahdi Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]

Z

  • Zadsar.Mehdi Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • Zamani Foroushani.Ruhollah Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]