Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles

Subject Areas : Composite materials

Vahid Norouzifard ¹ , Ashkan Nazari Siahpoush ² , Amir Talebi ³

1 - Department of Mechanical Engineering, Jundi-shapur University of Technology, Dezful, Iran
2 - Department of Materials and Metallurgy Engineering, Islamic Azad University-Dezful baranch, Dezful, Iran
3 - Faculty of Materials & Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Iran

Received: 2022-07-05 Accepted : 2022-08-03 Published : 2022-04-01

Keywords:

References:

[1] S. Fu et al., “Effect of aging process on the microstructure and properties of Cu–Cr–Ti alloy,” Mater. Sci. Eng. A, vol. 802, 2021, p. 140598.

[2] X. Gao et al., “Mechanical properties and thermal conductivity of graphene reinforced copper matrix composites,” Powder Technol., vol. 301, 2016, pp. 601–607.

[3] N. Somani, Y. K. Tyagi, P. Kumar, V. Srivastava, and H. Bhowmick, “Enhanced tribological properties of SiC reinforced copper metal matrix composites,” Mater. Res. Express, vol. 6, no. 1, 2018,  p. 016549.

[4] R. kumar L and A. K. S, “Corrosion and wear behaviour of nano Al2O3 reinforced copper metal matrix composites synthesized by high energy ball milling,” Part. Sci. Technol., vol. 38, no. 2, 2020, pp. 228–235.

[5] K. K. Alaneme, E. A. Okotete, A. V. Fajemisin, and M. O. Bodunrin, “Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: a review,” Arab J. Basic Appl. Sci., vol. 26, no. 1, 2019, pp. 311–330.

[6] A. Brendel, C. Popescu, H. Schurmann, and H. Bolt, “Interface modification of SiC-fibre/copper matrix composites by applying a titanium interlayer,” Surf. Coatings Technol., vol. 200, no. 1-4, 2005, pp. 161–164.

[7]T. Köck, A. Brendel, and H. Bolt, “Interface reactions between silicon carbide and interlayers in silicon carbide-copper metal-matrix composites,” J. Nucl. Mater., vol. 362, no. 2–3, 2007, pp. 197–201.

[8] M. Abolghasem, A. Rashidi, S. M. Abbasi, and M. Mihanpanah, “Manufacture and mechanical properties study of copper-matrix nanocomposites reinforced with carbon nanotubes by means of powder metallurgy,” emergencias, vol. 6, 2013, pp. 22–27.

[9] G. Shao, P. Liu, K. Zhang, W. Li, X. Chen, and F. Ma, “Mechanical properties of graphene nanoplates reinforced copper matrix composites prepared by electrostatic self-assembly and spark plasma sintering,” Mater. Sci. Eng. A, vol. 739, no. August 2018, 2019, pp. 329–334.

[10]C. Salvo, R. V. Mangalaraja, R. Udayabashkar, M. Lopez, and C. Aguilar, “Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites,” J. Alloys Compd., vol. 777, 2019, pp. 309–316.

[11] K. Zhang, G. Shao, W. Li, X. Chen, F. Ma, and P. Liu, “Wear and Corrosion Behavior of Graphene-Nanoplate-Reinforced Copper Matrix Composites Prepared Through Electrostatic Self-Assembly,” J. Mater. Eng. Perform., vol. 28, no. 3, 2019, pp. 1650–1660.

[12] N. Vijay Ponraj, A. Azhagurajan, S. C. Vettivel, X. Sahaya Shajan, and P. Y. Nabhiraj, “Study of Processing and Microstructure of Copper Composite Reinforced with Graphene Nanosheet by Powder Metallurgy Technique,” Powder Metall. Met. Ceram., vol. 56, no. 9–10, 2018, pp. 523–534.

[13] K. K. Alaneme and B. U. Odoni, “Mechanical properties, wear and corrosion behavior of copper matrix composites reinforced with steel machining chips,” Eng. Sci. Technol. an Int. J., vol. 19, no. 3, 2016, pp. 1593–1599.

[14] S. Cardinal, J. M. Pelletier, G. Q. Xie, F. Mercier, and F. Dalmas, “Enhanced compressive plasticity in a Cu-Zr-Al – Based metallic glass composite,” J. Alloys Compd., vol. 782, 2019, pp. 59–68.

[15] J. Chen et al., “Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites,” J. Alloys Compd., vol. 649, 2015, pp. 630–634.

[16] V. Norouzifard, H. Naeinzadeh, and A. Talebi, “Fabrication and investigation of mechanical properties of copper matrix nanocomposite reinforced by steel particle,” J. Alloys Compd., vol. 887, 2021, p. 161434.

[17] Annual Book of ASTM Standards. E 466, 2016.

[18] Annual Book of ASTM Standards. E8/E8M, 2016.

[19] G. H. A. Bagheri, “The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles,” J. Alloys Compd., vol. 676, 2016, pp. 120–126.

[20] D. Hull, Fractography: Observing, Measuring and Interpreting the Fracture Surface Topography. Cambridge: Cambridge University Press, 1999.

[21] H. ASM, Volume 12: fractography. ASM international, 1987.

[22] A. Echeverría and J. M. Rodriguez-Ibabe, “The role of grain size in brittle particle induced fracture of steels,” Mater. Sci. Eng. A, vol. 346, no. 1–2, 2003, pp. 149–158.

[23] N. Chawla and K. K. Chawla, Metal Matrix Composites. Springer, 2006.