List of Articles Stress

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Fatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
  علی عبداللهی فر محمدامید خشوعی سید مسعود هاشمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluating the impact of length and thread pitch on the stress distribution in dental implants and surrounding bone using finite element method
  مسیح فیروزبخت حامد عجبی نائینی مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Vibration Analysis of FG Micro-Beam Based on the Third Order Shear Deformation and Modified Couple Stress Theories
  Mehdi Alimoradzadeh Mehdi Salehi Sattar Mohammadi Esfarjani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - The mixed mode fracture mechanics in a hole plate bonded with two dissimilar plane
  محمد رحیم ترشیزیان حسین اندرزجو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Determination The Stress Intensity Factor in The Un-Central Edge Cracks With The concentrated Load
  فرزاد فریبا سید مهران زحلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - A new plan to connect aluminum tubes of subsurface structures
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Modal Analysis Turboshaft Test Stand Motor Designed by Using ANSYS
  مجتبی حسنلو سید غلامرضا میرحسینی محمود صادق زاده احمد باقری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Stress intensity factor at the hole-edge cracks tips in a finite plate
  Mohammad Rahim Torshizian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Free Vibration Analysis of Sandwich Micro Beam with Piezoelectric Based on Modified Couple Stress Theory and Surface Effects
  Mohammad khajekhabaz Ali Eftekhari Mohammad Hashemian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Fracture analysis of multiple axisymmetric interfacial cracks in an FGM Coated orthotropic layer
  Behrooz Momeni
  20.1001.1.27834441.2021.13.1.6.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
  20.1001.1.27834441.2021.13.1.3.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Effect of wind speed on the drag force and wall shear stress of domes in historical mosques of Iran: a case study
  Iman Pishkar Mehdi Jahangiri Rouhollah Yadollahi Farsani Ayoub Khosravi Farsani
  20.1001.1.27834441.2023.15.2.6.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Effect of residual stress in low cycle fatigue for coated exhaust manifold
  Hojjat ashouri
  20.1001.1.27834441.2022.14.2.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Smart car system: automobile driver's stress recognition with artificial neural networks
  Mahtab Vaezi Mehdi Nasri Farhad Azimifar
  20.1001.1.27834441.2023.15.2.3.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Analysis of Stress Intensity Factors in Hollow Cylinders Reinforced by an Effective Coating Containing Multiple Cracks
  Mostafa Karimi Alireza Hassani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Stabilized crack-opening stresses as a function of R-ratios and stress levels
  Rahi Chermahini Majid Jabbari
  20.1001.1.27834441.2022.14.1.6.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Stress analysis of non-linearly variable thickness rotating disk in gas turbine engine using hyper-geometric method
  Behrooz Shahriari Nedasadat Seddighi
  20.1001.1.27834441.2023.15.2.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - An Initiative Plan of the Equivalent Model for Simulation of theWelding Process
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Presentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint
  A.H. Ehsani Ehsani M. Shirzadian Gilan A. Ghafori Sayad A. Shokrgozar Navi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Numerical and Experimental Evaluation of Residual Stress and Fatigue Strength of Steel CK35 in Shot Peening Process
  مهدی تاجداری حمیدرضا بهاروندی علیرضا مرادخانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Investigation of Important Parameters in Residual Stress Determination in Isotropic Plates and Laminated Composites by Slitting Method
  محمود مهرداد شکریه سعید اکبری رکن‌آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel
  M. Karimian , E. Mir Mohammad Sadeghi M. Mokhles Pour Esfahani M. badakhshian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Modeling and Crack-growth and Calculate First Intensity Factor with Ansys Software
  S.M. Hossein Mirgilani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Nonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties
  مهرنوش دمیرچلی محمد آزادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Prediction of Work-Piece Constitutive Equation in Hot Rolling of Strip
  سحر سلیمی سمیرا سلیمی امیرحسین ادیبی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - The Effect of Volume Fractions on Hole Stress Concentration in Composite Lamina Subjected to Matrix Plasticity
  پژمان تقی پور بیرگانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Dynamic Stability of Nano FGM Beam Using Timoshenko Theory
  شهاب صفاری محمد هاشمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Design and structural analysis of buckling and prestressed modal of an isogrid conical shell under mechanical and thermal loads
  Behrooz Shahriari Mahdi Sharifi Hassan Izanlo
  10.71939/jsme.2024.1105736
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Creep analysis in two functionally graded rotating gears
  Milad  Kharati Asl Ali akbar lotfi Saeed Daneshmand
  10.71939/jsme.2024.1130580
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Crack behavior investigation and crack opening stresses for plane stress, plane strain and 3D cases
  Rahmat Ghadimi Chermahini Majid Jabbari
  10.71939/jsme.2024.1195171