List of articles (by subject) Chemistry

---

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings
  Mahdi Jalali Azizpour Salman Nourouzi Hamidreza Salimijazi Davood Sajedipour Hasan Mohammadi majd Foad Saadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes
  Seyed Elias Mousavi Mohammad Hossein Khaleghifar Farshid Ahmadi Mahmood Meratian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Elastic characterization of porous bone by ultrasonic method through Lamb waves
  lahcen Mountassir Touriya Bassidi Hassan Nounah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Amelioration of the acid blue oxidation process by as-synthesized ZnO nanoparticles: Optimization of the dye and photocatalyst concentration together with the pH of the solution
  Mehrnaz Gharagozloua Sanaz Naghibi Mohammad Ebrahim Olya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Optimization of die geometry for Tube Channel Pressing
  Mohammad Hassan Farshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
  Mahmoud Hajisafari Arman Zare Bidaki Saeid Yazdani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - One-pot synthesis of Ag/Fe3O4 nanocomposite: Preparation, characterization and efficient catalyst
  Babak Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Hydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite
  Mahdi Mirzaee Mostafa Amini Masoomeh Sharbatdaran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods
  Siroos Ahmadi Vali Alimirzaloo Meysam Abdollahzade Gavgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - The Effect of Friction Stir Processing Speed Ratio on the Microstructure and Mechanical Properties of A 430 Ferritic Stainless Steel
  Ali Salemi Golezani S. M Arab Sh. Javadi Firooz Kargar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Investigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds
  Farrokh Najafzadegan Hojatallah Mansori Morteza shamanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding
  Iman Hajiannia Morteza Shamanian Masoud Kasiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - 3D finite element study of temperature variations during equal channel angular pressing
  Mehdi Shaban Ghazani A. vajd B. Mosadeg
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology
  Mehdi Vahdati Ramezanali Mahdavinejad Saeid Amini Mahmoud Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect
  liguo zhang peiyuan he jianying zhang zhenyu ji hongliang xu zhuangli zhang
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel
  Maryam Mohammad Jafarpour Bitollah Eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
  mehdi shaban sahel gozalzadeh beitallah eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness
  Mustafa Özdemir Hakan Gökmese H Dilipak V Yilmaz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Numerical investigation of strain distribution during cyclic expansion extrusion (CEE)
  Hamid Reza Torabi M.M. Samandari Ghader Faraji Abolfazl Masoumi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
  Minoo Tabanfard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Size effect in equal channel angular pressing (ECAP) process
  M. Riazat Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Punch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method
  M.R. Baghaei Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Modeling and production of high strength Al strips by equal channel multi angular pressing method
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion
  mohammadreza kaji Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Investigation of Roll Bonding between AA5083 Strips
  Mohammad Sedighi mohammad heydari vini Pedram Farhadipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Effect of N2 partial pressure on the structural and mechanical properties of TaN films
  mehdi manouchehrian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles
  mohamed saad iman ghoneim Al-Sayed Al-Sherbini
  20.1001.1.2322388.2019.7.2.4.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Palladium-Cobalt on Reduced Graphene Oxide as an Electro-catalyst for Ethylene Glycol Oxidation in Alkaline Medium: Synthesis and Electrochemical Performance
  Hamid Asgari Somayeh Majidi
  20.1001.1.2322388.2021.9.3.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods
  Hossein Jafarzadeh Sina Hassan Alipouri Fard Alireza Babaei
  10.71670/jmatpro.2024.981647
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - The Effect of Multi-Walled Carbon Nanotubes on CO2/N2 Separation Using Sulfonated Polyether Ether Ketone/Polyetherimide Nano Composite Membrane
  Habibollah Bahreini Elham Ameri Hassan Ebadi-Dehaghani
  10.71670/jmatpro.2024.981651
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Carbon Monoxide Gas Sensor Based on Nanocrystalline SnO2 Thin Film Grown on Al2O3 Substrate
  Amirhosein Asilian S. Mohammadali Zanjani Reza Pournajaf Reza Ebrahimi-kahrizsangi
  10.71670/jmatpro.2024.981653
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification
  Hamzeh Amoshahi Mohammad Reza Mohammad Shafiee Shabnam Kermani Mehrosadat Mirmohammadi
  20.1001.1.2322388.2022.10.4.6.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract
  Azam Beheshtian Mohammad Hadi Givianrad Hossain-Ali Rafiee-Pour Parviz Aberoomand Azar
  10.71670/jmatpro.2024.981660
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - The Efficiency of UV/S2O82- and UV/ ZnO Photo-Oxidation Process for the Removal of Acetominophen from Aqueous Solution: A Comparative Study
  Farham Aminsharei Hossein Abbastabar Ali Hassanzadeh-Tabrizi Sara Ataei
  10.71670/jmatpro.2024.981664
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Editorial
  Hamid Ashrafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Editorial
  
  20.1001.1.2322388.2019.7.1.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Editorial Board
  
  20.1001.1.2322388.2013.1.3.1.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Editoral
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Editorial
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Editorial Board
  
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Effect of temperature and activator molar of Na2O to SiO2 in the process of synthesis and microstructure of cement geopolymer
  M Asadi A Nemati R Naghizadeh K Arzani J Fahim
  20.1001.1.2322388.2013.1.3.2.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - An investigation on full annealing temperature and annealing twins’ Density in Fe-33Mn-3Si-2Al high-manganese steel
  Gh.R Razavi A Ansaripour H Monajatizadeh M.R Toroghinejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Simulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
  E Amini F Madadi Sh Katani M Atapoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
  S Nazari A Saidi A Shafyei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - The Effect of Microstructure on Estimation of the Fracture Toughness (KIC) Rotor Steel Using Charpy Absorbed Energy (CVN)
  A Salemi Golezani
  20.1001.1.2322388.2013.1.3.3.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Influences of Bath Stirring Rate on Synetics of Nano Composite Ni-SiC-Gr Coatings on St37 via Electrodeposition Process
  M Rostami R Ebrahimi-Kahrizsangi A Saatchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Comparative evaluation of niobium surface preparation methods for electrodeposition
  H Nasiri Vatan M.R Mohammadshafiee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Optimization and utilization of semisolid casting process for semisolid welding of Al-6061 alloy
  M Hajihashemi M Shamanian B Niroumand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Effect of Deposition Regime on Tribological Behavior of VK8Coating on 1.2344 Tool Steel Obtained by Electro Spark Method
  M Aghakhani A Shafyeib H Monajatizadea M. A Aghakhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Numerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
  M Amin Jabbareh H Asadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Bimetal friction stir welding of aluminum to magnesium
  P Pourahmad M Abbasi H.A Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Heat Transfer Modelling in Wide Gap Rail Thermite Welding
  A Mohassela A. H Kokabi P Davamia E Ranjbarnodeh M Movahedia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Influence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding
  M jokar F MalekGhaini M. J. Torkamany
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - An illustration of photocatalytic properties of ZnO nanorods array films
  A Nekoubin H Ghayour Najafabadi M Nasr Esfahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - An Investigation Into the Effects of Friction and Anisotropy Coefficients and Work Hardening Exponent on Deep Drawing With FEM
  R Hosseini A Ebrahimi mamaghani A Asa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Investigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
  R. DavoudianDehkordi A. A Nourbakhsh H MonajatiZadeha
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - An investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
  M.E Bajgholi R Soltani Tashi A.A Akbari Mousavi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Vacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
  M.E Bajgholi E Heshmat Dehkordi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Fabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
  M.H Shirani A Saidi A.R Shirani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - The effect of activating fluxes on 316L stainless steel weld joint characteristic in TIG welding using the Taguchi method
  E Ahmadi A.R Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Influence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
  M Pouyamanesh B Eghbali Gh. R Ebrahimi M Saadati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52
  Hamed Zeidabadinejad Mahdi Rafiei Iman Ebrahimzadeh Mahdi Omidi Farid Naeimi
  10.71670/jmatpro.2024.1121074