Demanding high dimensional accuracy of finished work pieces and reducing the scrap and production cost, call for devising reliable tool condition monitoring system in machining processes. In this paper, a tool wear monitoring system for tool state evaluation during hard More
Demanding high dimensional accuracy of finished work pieces and reducing the scrap and production cost, call for devising reliable tool condition monitoring system in machining processes. In this paper, a tool wear monitoring system for tool state evaluation during hard turning of AISI D2 is proposed. The method is based on the use of wavelet packet transform for extracting features from vibration signals, followed by neural network for associating the root mean square values of extracted features with tool flank wear values of the cutting tool. From the result of performed experiments, coefficient of determination and root mean square error for the proposed tool wear monitoring system were found to be 99% and 0.0104 respectively. The experimental results show that wavelet packet transform of vibration signals obtained from the cutting tool has high accuracy in tool wear monitoring. Furthermore, the proposed neural network has the acceptable ability in generalizing the system characteristics by predicting values close to the actual measured ones even for the cutting conditions not encountered in the training stage.
Manuscript profile
In this paper, a real-time intelligent adaptive control with optimization methodology is proposed to produce parts with uniform surface roughness in finish turning of hardened AISI D2. Unlike traditional optimization approaches, the proposed methodology considers cuttin More
In this paper, a real-time intelligent adaptive control with optimization methodology is proposed to produce parts with uniform surface roughness in finish turning of hardened AISI D2. Unlike traditional optimization approaches, the proposed methodology considers cutting tool real condition. Wavelet packet transform of cutting tool vibration signals followed by neural network was used to estimate tool flank wear. Intelligent models (artificial neural networks and genetic programming) were utilized to predict surface roughness and tool wear during machining process. Particle swarm optimization algorithm determined optimum feed rate that resulted in desired surface roughness. Performed confirmatory experiments indicated that the proposed adaptive control method not only resulted in parts with acceptable uniform quality, but also decreased the machining cost up to 8.8% and increased material removal rate up to 20% in comparison with those of traditional CNC turning systems.
Manuscript profile