A

  • A.Naveen Kumar DESIGN OF AN INTEGRATED IN-LINE TRACEABILITY AND ERP SYSTEM – A CASE STUDY APPROACH [ Vol.17, Issue 4 - Autumn Year 2021]
  • Abasian.Hamid Reza Providing a System Dynamic Model to Predict Construction Status in Iran Using Sustainable Development Indicators [ Vol.17, Issue 3 - Summer Year 2021]
  • Abbasi.Sina The sustainable supply chain of CO2 emissions during the coronavirus disease (COVID-19) pandemic [ Vol.17, Issue 4 - Autumn Year 2021]
  • Abdi.Farshid A New Multi-Stage Feature Selection and Classification Approach: Bank Customer Credit Risk Scoring [ Vol.17, Issue 1 - Winter Year 2021]
  • Abdi.Farshid Customer Behavior Mining Framework (CBMF) using clustering and classification techniques [ Vol.15, Issue 1 - Winter Year 2019]
  • Abdullahi.Sanusi Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • Abdullahi.Sanusi Copula Approach for Reliability and Performance Estimation of Manufacturing System [ Vol.18, Issue 2 - Spring Year 2022]
  • abooie.mohammad hosein Interpretive Structural Modeling (ISM) of Intellectual Capital Components [ Vol.16, Issue 4 - Autumn Year 2020]
  • Abtahi.Amir-Reza A novel hybrid meta-heuristic technique applied to the well-known benchmark optimization problems [ Vol.13, Issue 1 - Winter Year 2017]
  • Abtahi.Amir-Reza Developing two 4-parameter and 5-parameter exponential smoothing methods with multiplicative trend for demand forecasting [ Vol.17, Issue 3 - Summer Year 2021]
  • Abtahi.Amir-Reza Determining the level of automation in the cosmetics industry considering new technology [ Vol.18, Issue 2 - Spring Year 2022]
  • Adebayo Adeoti.Olatunde Multiple Dependent States Repetitive Sampling Control Chart for Monitoring Rayleigh Distributed Data [ Vol.18, Issue 3 - Summer Year 2022]
  • Aghayi.Nazila A novel three-stage distance-based consensus ranking method [ Vol.16, Issue 1 - Winter Year 2020]
  • Aghsami.Amir A Facility Location Problem in a Green Closed-Loop Supply Chain Network Design by Considering Defective Products [ Vol.18, Issue 1 - Winter Year 2022]
  • Ahmad Khanbeigi.Ghafour A hierarchical heuristic method to analysis of economics and safety of a pressurized water reactor in a power market [ Vol.19, Issue 1 - Winter Year 2023]
  • Ahmadi Yazdi.Ahmad Multivariate incapability index for high technology manufacturing processes in presence of the measurement errors: A case study in electronic industry [ Vol.17, Issue 1 - Winter Year 2021]
  • Ahmadi Yazdi.Ahmad Phase II monitoring of multivariate simple linear profiles with estimated parameters [ Vol.15, Issue 4 - Autumn Year 2019]
  • AJAYEOBA.ABIOLA SAFETY STRATEGY ALLOCATION SIMULATOR FOR ACCIDENT REDUCTION AND COST SAVINGS IN SAFETY MANAGEMENT SYSTEM [ Vol.18, Issue 3 - Summer Year 2022]
  • Akbari.ALiakbar More efficiency in fuel consumption using gearbox optimization based on Taguchi method [ Vol.10, Issue 2 - Spring Year 2014]
  • Al-Ablani.Bader Risk Assessment of Bridge Construction Project through cost management phases [ Vol.17, Issue 1 - Winter Year 2021]
  • Alam Tabriz.Akbar Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry [ Vol.18, Issue 4 - Autumn Year 2022]
  • Alam.Mohd Risk Assessment of Bridge Construction Project through cost management phases [ Vol.17, Issue 1 - Winter Year 2021]
  • Al-Ghimlas.Noura Risk Assessment of Bridge Construction Project through cost management phases [ Vol.17, Issue 1 - Winter Year 2021]
  • Ali.Abdulelah Risk Assessment of Bridge Construction Project through cost management phases [ Vol.17, Issue 1 - Winter Year 2021]
  • ali.sajid Shrinkage simplex-centroid designs for a quadratic mixture model [ Vol.14, Issue 1 - Winter Year 2018]
  • Ali.U.A Analysis of Mean Time to System Failure and Availability of a System with Cold Standby Unit [ Vol.18, Issue 1 - Winter Year 2022]
  • Alinaghian.Mehdi A hybrid meta-heuristic algorithm for the vehicle routing problem with stochastic travel times considering the driver's satisfaction [ Vol.8, Issue 1 - Winter Year 2012]
  • Alipour.Mohammad A fuzzy model for achieving lean attributes for competitive advantages development using AHP-QFD-PROMETHEE [ Vol.10, Issue 3 - Summer Year 2014]
  • AL-Oqla.Faris Expert System Optimizing Model of Filament Winding Process for Improved Automated Composite Manufacturing Structure [ Vol.17, Issue 3 - Summer Year 2021]
  • Al-Refaie.Abbas Application on concurrent product design and process planning for a Bicycle design [ Vol.17, Issue 2 - Spring Year 2021]
  • Amani.Mohammad Amin Evaluating Factors Affecting Project Success: An Agile Approach [ Vol.18, Issue 1 - Winter Year 2022]
  • Ambursa.Faruku Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • amirabadi.mohammad A heuristic algorithm for solving bi-level programming problems with application to large-scale location-arc routing in urban traffic lights maintenance [ Vol.19, Issue 2 - Spring Year 2023]
  • Amiri.Amirhossein Design of Control Charts for Monitoring Logistic Regression Profiles with Estimated Parameters [ Vol.17, Issue 3 - Summer Year 2021]
  • Amiri.Hamid A new robust counterpart model for uncertain linear programming problems [ Vol.18, Issue 2 - Spring Year 2022]
  • Amiri.Maghsoud Developing a bi-objective optimization model for solving the availability allocation problem in repairable series–parallel systems by NSGA II [ Vol.12, Issue 1 - Winter Year 2016]
  • Amiri.Maghsoud A fuzzy MCDM model with objective and subjective weights for evaluating service quality in hotel industries [ Vol.9, Issue 1 - Winter Year 2013]
  • Amoozad Khalili.Hossein Modelling and robust scheduling of two-stage assembly flow shop under uncertainty in assembling times [ Vol.17, Issue 3 - Summer Year 2021]
  • Amoozad Khalili.Hossein A Multi-objective Leagile Demand-Driven Optimization Model incorporating a Reliable Omnichannel Retailer: A Case Study [ Vol.19, Issue 2 - Spring Year 2023]
  • Apanapudor.Joshua Modeling the Effect of Advertising and Subsidy Transfer in a Three-Level Channel Using Game Theory [ Vol.18, Issue 4 - Autumn Year 2022]
  • Arjmandi.Fatemeh Robust Scheduling and Planning of Operating Rooms and Sterilization Unit with Emergency and Elective Patients: Two Metaheuristic Algorithms [ Vol.19, Issue 2 - Spring Year 2023]
  • arkat.jamal Optimum target value of multivariate processes with unequal non-conforming costs [ Vol.2, Issue 3 - Summer Year 2006]
  • Asadzadeh.Shervin Monitoring the censored lognormal reliability data in a three-stage process using AFT model [ Vol.13, Issue 1 - Winter Year 2017]
  • Asadzadeh.Shervin Development of an evolutionary fuzzy expert system for estimating future behavior of stock price [ Vol.13, Issue 1 - Winter Year 2017]
  • Ashouri Moghadam.Tahminre Prognosis of Failure Time in Gas Turbines regarding multi time scales [ Vol.17, Issue 4 - Autumn Year 2021]
  • Ataee Ghortolmesh.Asghar The role of web-based systems in improving business processes using simulation approach (Case study: Credit card) [ Vol.17, Issue 2 - Spring Year 2021]
  • Atapour Mashhad.Fatemeh Analysis of the performance of different classifiers in solving the credit risk scoring problem with noisy and clean data [ Vol.18, Issue 3 - Summer Year 2022]
  • Aulawi.Hilmi Economic Order Quantity Model for Agricultural Products with Harvest Period [ Vol.17, Issue 4 - Autumn Year 2021]
  • Avvari.Muralidhar Examining significant factors in micro and small enterprises performance: case study in Amhara region, Ethiopia [ Vol.14, Issue 2 - Spring Year 2018]
  • AYAGI.HAMISU Performance Assessment of a Serial System with Human Operators Attended by Repair Machines [ Vol.19, Issue 1 - Winter Year 2023]
  • Ayoubi.Mona A new control chart based on discriminant analysis for simple linear profiles monitoring [ Vol.16, Issue 4 - Autumn Year 2020]
  • Azadi Moghaddam.Masoud Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts [ Vol.12, Issue 2 - Spring Year 2016]

B

  • Babazadeh.Reza Supply chain network design problem for a new market opportunity in an agile manufacturing system [ Vol.8, Issue 1 - Winter Year 2012]
  • Badraghi.Yousef Improving discrimination power based on reducing dispersion of weights in data envelopment analysis [ Vol.18, Issue 2 - Spring Year 2022]
  • Bagheriyan.Mina Designing an Algorithmic Trading System, Based on Deep Learning (Case Study: Tehran Stock Exchange) [ Vol.19, Issue 4 - Autumn Year 2023]
  • Bagherpour.Morteza An ex ante control chart for project monitoring using earned duration management observations [ Vol.14, Issue 4 - Autumn Year 2018]
  • Bagherzadeh Valami.hadi Advancing Organizational Efficiency: A Novel Dynamic Network DEA for Strategic Carry-Over Allocation [ Vol.19, Issue 3 - Summer Year 2023]
  • Balam.Venkata Phanikrishna Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • Balusa.Bhanu Chandar Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • bamdadsoufi.Jahanyar A Pattern for Sustainable Development from Perspective of Stakeholders Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • bashiri.mahdi Exact algorithms for solving a bi-level location–allocation problem considering customer preferences [ Vol.15, Issue 3 - Summer Year 2019]
  • bashiri.mahdi Considering undesirable variables in PCA-DEA method: a case of road safety evaluation in Iran [ Vol.7, Issue 15 - Winter Year 2011]
  • bashiri.mahdi Closed loop supply chain network design with fuzzy tactical decisions [ Vol.12, Issue 3 - Summer Year 2016]
  • bashiri.mahdi An application of principal component analysis and logistic regression to facilitate production scheduling decision support system: an automotive industry case [ Vol.9, Issue 1 - Winter Year 2013]
  • bashiri.mahdi General form of a cooperative gradual maximal covering location problem [ Vol.14, Issue 2 - Spring Year 2018]
  • bashiri.mahdi Simultaneous robust estimation of multi-response surfaces in the presence of outliers [ Vol.9, Issue 1 - Winter Year 2013]
  • bashiri.mahdi Scenario-based modeling for multiple allocation hub location problem under disruption risk: multiple cuts Benders decomposition approach [ Vol.13, Issue 4 - Autumn Year 2017]
  • bashiri.mahdi The analysis of residuals variation and outliers to obtain robust response surface [ Vol.9, Issue 1 - Winter Year 2013]
  • bashiri.mahdi Effective heuristics and meta-heuristics for the quadratic assignment problem with tuned parameters and analytical comparisons [ Vol.8, Issue 1 - Winter Year 2012]
  • bashiri.mahdi A neuro-data envelopment analysis approach for optimization of uncorrelated multiple response problems with smaller the better type controllable factors [ Vol.9, Issue 1 - Winter Year 2013]
  • bashiri.mahdi Two phase genetic algorithm for vehicle routing and scheduling problem with cross-docking and time windows considering customer satisfaction [ Vol.14, Issue 1 - Winter Year 2018]
  • Behdinian.Ayria Evaluating Factors Affecting Project Success: An Agile Approach [ Vol.18, Issue 1 - Winter Year 2022]
  • Belkahla Driss.Olfa Solving the flexible job shop problem by hybrid metaheuristics-based multiagent model [ Vol.14, Issue 1 - Winter Year 2018]
  • BELLAOUAR.Ahmed A dynamic approach for maintenance evaluation and optimization of multistate system [ Vol.17, Issue 1 - Winter Year 2021]
  • bernard.Alain An availability-based design optimization by using a fuzzy goal programming approach [ Vol.19, Issue 4 - Autumn Year 2023]
  • Bhagat.Amita Unreliable bulk retrial queues with delayed repairs and modified vacation policy [ Vol.10, Issue 3 - Summer Year 2014]
  • bozorgi-amiri.ali Developing a new stochastic competitive model regarding inventory and price [ Vol.11, Issue 3 - Summer Year 2015]
  • Bravo.German Optimization model for remanufacturing in a real sawmill [ Vol.16, Issue 4 - Autumn Year 2020]
  • Buddala.Raviteja Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • Buddala.Raviteja Improved teaching–learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems [ Vol.14, Issue 3 - Summer Year 2018]
  • Buddala.Raviteja An integrated approach for scheduling flexible job-shop using teaching–learning-based optimization method [ Vol.16, Issue 1 - Winter Year 2020]

C

  • Cahyadi.Dani Economic Order Quantity Model for Agricultural Products with Harvest Period [ Vol.17, Issue 4 - Autumn Year 2021]
  • Chakraborty.Shankar Development of a QFD-based expert system for CNC turning centre selection [ Vol.11, Issue 4 - Autumn Year 2015]
  • Chakraborty.Shankar Supplier selection using compromise ranking and outranking methods [ Vol.7, Issue 14 - Summer Year 2011]
  • Chaudhary.Shakeeludeen Performance assessment of a complex repairable system with k-out-of-n: G operational scheme and copula repair approach [ Vol.18, Issue 3 - Summer Year 2022]
  • Chiadamrong.Navee A Robust Possibilistic Chance-Constrained Programming Model for Optimizing a Multi-Objective Aggregate Production Planning Problem under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]

D

  • DAHIA.Zakaria A dynamic approach for maintenance evaluation and optimization of multistate system [ Vol.17, Issue 1 - Winter Year 2021]
  • Daneshmand-Mehr.Maryam A Robust Green multi-Channel Sustainable Supply Chain based on RFID technology with considering pricing strategy and subsidizing policies [ Vol.18, Issue 4 - Autumn Year 2022]
  • Danjuma.Muktar Umar Analysis of Mean Time to System Failure and Availability of a System with Cold Standby Unit [ Vol.18, Issue 1 - Winter Year 2022]
  • Danjuma.Muktar Umar Reliability Availability Maintainability Dependability Analysis of Mirrored Distributed System [ Vol.18, Issue 2 - Spring Year 2022]
  • Davarpanah.Sobhan Developing two 4-parameter and 5-parameter exponential smoothing methods with multiplicative trend for demand forecasting [ Vol.17, Issue 3 - Summer Year 2021]
  • de Oliveira.Fabíola EPQ model with inspection of batches and disposal of defective items [ Vol.17, Issue 2 - Spring Year 2021]
  • delgoshaei.Yalda Evaluation of research performance of faculty members of Islamic Azad University, using Fuzzy Delphi method [ Vol.17, Issue 4 - Autumn Year 2021]
  • Didehkhani.Hosein Practical benchmarking in DEA using artificial DMUs [ Vol.15, Issue 2 - Spring Year 2019]
  • Didehkhani.Hosein Developing a fuzzy inference system to devise proper business strategies: a study on carpet industry [ Vol.15, Issue 3 - Summer Year 2019]
  • Doan.Tuan A Robust Possibilistic Chance-Constrained Programming Model for Optimizing a Multi-Objective Aggregate Production Planning Problem under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]
  • dowlatabadi.mohsen A Pattern for Sustainable Development from Perspective of Stakeholders Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • DRON.Jean-Paul A dynamic approach for maintenance evaluation and optimization of multistate system [ Vol.17, Issue 1 - Winter Year 2021]

E

  • ebrahimi.hosein Evaluation of the behavior of robust process capability estimators based on their bootstrap confidence intervals for Gamma distribution [ Vol.19, Issue 3 - Summer Year 2023]
  • ebrahimi.malihe Reused raw materials of returned products in closed-loop supply chain considering green technology and quality level [ Vol.18, Issue 2 - Spring Year 2022]
  • Ebrahimi.Maryam System Dynamics Modeling and Simulation to Analyze the Role of Solar Energy in Secure Access to Sustainability [ Vol.17, Issue 1 - Winter Year 2021]
  • Ebrahimnejad.Saeed Incorporating location, routing, and inventory decisions in a bi-objective supply chain design problem with risk-pooling [ Vol.9, Issue 1 - Winter Year 2013]
  • Ebrahimnejad.Saeed Strategy-aligned fuzzy approach for market segment evaluation and selection: a modular decision support system by dynamic network process (DNP) [ Vol.9, Issue 1 - Winter Year 2013]
  • Ehsanifar.Mohammad Providing a System Dynamic Model to Predict Construction Status in Iran Using Sustainable Development Indicators [ Vol.17, Issue 3 - Summer Year 2021]
  • EslamiParsa.Ghazaleh Optimizing warranty cost in a three-stage non-renewing warranty policy [ Vol.18, Issue 4 - Autumn Year 2022]
  • Esmaeili.M. Optimal (R, Q) policy and pricing for two-echelon supply chain with lead time and retailer’s service-level incomplete information [ Vol.14, Issue 1 - Winter Year 2018]
  • Esmaeili.Maryam Using game theory approach to interpret stable policies for Iran’s oil and gas common resources conflicts with Iraq and Qatar [ Vol.11, Issue 4 - Autumn Year 2015]
  • Esmaeili.Maryam A new adaptive exponential smoothing method for non-stationary time series with level shifts [ Vol.10, Issue 4 - Autumn Year 2014]
  • Esmaeili.Maryam A multiple objective approach for joint ordering and pricing planning problem with stochastic lead times [ Vol.9, Issue 1 - Winter Year 2013]
  • Esmaeili.Parinaz Analysis of Labor-Management Negotiation based on Chicken Evolutionary Game and Catastrophe Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • esmailnezhad.bahman A stochastic model for the cell formation problem considering machine reliability [ Vol.11, Issue 3 - Summer Year 2015]
  • eydi.alireza A model for distribution centers location-routing problem on a multimodal transportation network with a meta-heuristic solving approach [ Vol.14, Issue 2 - Spring Year 2018]
  • Ezimadu.Peter Modeling the Effect of Advertising and Subsidy Transfer in a Three-Level Channel Using Game Theory [ Vol.18, Issue 4 - Autumn Year 2022]
  • Ezimadu.Sophia Modeling the Effect of Advertising and Subsidy Transfer in a Three-Level Channel Using Game Theory [ Vol.18, Issue 4 - Autumn Year 2022]

F

  • Faezy Razi.Farshad A hybrid DEA-based K-means and invasive weed optimization for facility location problem [ Vol.15, Issue 3 - Summer Year 2019]
  • Faezy Razi.Farshad Designing a Dynamic Model of Banking Services Sustainable Supply Chain Management Using System Dynamics (Case Study: Mehr Iran Bank) [ Vol.18, Issue 3 - Summer Year 2022]
  • Fahimi.Kaveh Optimization of rotor shaft shrink fit method for motor using “Robust design” [ Vol.14, Issue 4 - Autumn Year 2018]
  • fallah.mohammad Designing a sustainable integrated production system model under uncertainty considering the discount in production outsourcing costs [ Vol.18, Issue 4 - Autumn Year 2022]
  • fallah.mohammad Designing a model of product arrangement and multi-warehouse location-routing problem [ Vol.18, Issue 2 - Spring Year 2022]
  • Fallah.Mohammad Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry [ Vol.18, Issue 4 - Autumn Year 2022]
  • Farahani.Ameneh Optimization of Mobile Base Station Placement to Reduce Energy Consumption in Multi-hop Wireless Sensor Network [ Vol.19, Issue 2 - Spring Year 2023]
  • Farahani.Gholamreza Optimization of Mobile Base Station Placement to Reduce Energy Consumption in Multi-hop Wireless Sensor Network [ Vol.19, Issue 2 - Spring Year 2023]
  • Farokhizadeh.Farshid Dynamics of the Digital Banking Ecosystem in Iran [ Vol.19, Issue 4 - Autumn Year 2023]
  • Farrokhi-Asl.Hamed Dynamic cellular manufacturing system considering machine failure and workload balance [ Vol.16, Issue 1 - Winter Year 2020]
  • Farrokhi-Asl.Hamed A multi-objective genetic algorithm for a mixed-model assembly U-line balancing type-I problem considering human-related issues, training, and learning [ Vol.12, Issue 4 - Autumn Year 2016]
  • Farrokhi-Asl.Hamed Solving a bi-objective location routing problem by a NSGA-II combined with clustering approach: application in waste collection problem [ Vol.13, Issue 1 - Winter Year 2017]
  • fathi hafshejani.kiamars Retracted: Using genetic algorithm approach to solve a multi-product EPQ model with defective items, rework, and constrained space [ Vol.8, Issue 1 - Winter Year 2012]
  • fathi.kiamars Designing a Dynamic Model of Banking Services Sustainable Supply Chain Management Using System Dynamics (Case Study: Mehr Iran Bank) [ Vol.18, Issue 3 - Summer Year 2022]
  • Fattahi.Parviz An algorithm for multi-objective job shop scheduling problem [ Vol.2, Issue 3 - Summer Year 2006]
  • Fattahi.Parviz A stochastic model for the cell formation problem considering machine reliability [ Vol.11, Issue 3 - Summer Year 2015]
  • Fazlollahtabar.Hamed Multiple utility constrained multi-objective programs using Bayesian theory [ Vol.14, Issue 1 - Winter Year 2018]
  • Feizabadi.Mohammad Application of queuing theory in production-inventory optimization [ Vol.11, Issue 4 - Autumn Year 2015]
  • Fili.Mohammad Town trip forecasting based on data mining techniques [ Vol.16, Issue 4 - Autumn Year 2020]

G

  • Gadde.Srinivasa Rao Multiple Dependent States Repetitive Sampling Control Chart for Monitoring Rayleigh Distributed Data [ Vol.18, Issue 3 - Summer Year 2022]
  • Gazori-Nishabori.Arezoo A Multi-Period Berth Allocation-Scheduling Model with Different Terminals and Irregular Layouts Under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]
  • Ghaedy heidary.Ensieh A Facility Location Problem in a Green Closed-Loop Supply Chain Network Design by Considering Defective Products [ Vol.18, Issue 1 - Winter Year 2022]
  • Ghaffari.mahdi Developing a cellular manufacturing model considering the alternative routes, tool assignment, and machine reliability [ Vol.14, Issue 3 - Summer Year 2018]
  • Ghaffari-Hadigheh.Alireza Supply Chain Coordination with Wholesale contract in an Uncertain Environment [ Vol.19, Issue 4 - Autumn Year 2023]
  • Ghane Kanafi.Armin The sustainable supply chain of CO2 emissions during the coronavirus disease (COVID-19) pandemic [ Vol.17, Issue 4 - Autumn Year 2021]
  • Gharegozloo.Mona Developing new Methods to Monitor the Fuzzy Logistic Regression Profiles in Phase II (A case study in health-care) [ Vol.17, Issue 2 - Spring Year 2021]
  • GHASEMI.NASER Developing EPQ models for non-instantaneous deteriorating items [ Vol.11, Issue 3 - Summer Year 2015]
  • Ghezavati.Vahid Reza A multi-product, multi-period and multi-hub routing and scheduling model for offshore logistics [ Vol.19, Issue 2 - Spring Year 2023]
  • Ghezavati.Vahid Reza Optimizing a sustainable inventory-routing problem in tomato agri-chain considering postharvest biological behavior [ Vol.17, Issue 2 - Spring Year 2021]
  • Ghezavati.Vahidreza Stochastic extension of cellular manufacturing systems: a queuing-based analysis [ Vol.9, Issue 1 - Winter Year 2013]
  • Ghezavati.Vahidreza Modeling and solving multi-skilled resource-constrained project scheduling problem with calendars in fuzzy condition [ Vol.16, Issue 3 - Summer Year 2020]
  • gholam abri.amir Impact of information technology on productivity and efficiency in Iranian manufacturing industries [ Vol.11, Issue 1 - Winter Year 2015]
  • Gholam Abri.Amir Completion of the paper “Ranking Efficient DMUs based on single virtual inefficient DMU in DEA” [ Vol.19, Issue 3 - Summer Year 2023]
  • Gholam Abri.Amir Improving discrimination power based on reducing dispersion of weights in data envelopment analysis [ Vol.18, Issue 2 - Spring Year 2022]
  • gholamian.mohammad reza Joint pricing and replenishment decisions in an inventory model for deteriorating items considering wastewater treatment: A case study [ Vol.19, Issue 1 - Winter Year 2023]
  • Goharimanesh.Masoud More efficiency in fuel consumption using gearbox optimization based on Taguchi method [ Vol.10, Issue 2 - Spring Year 2014]
  • Golshanimanesh.Morteza Providing a System Dynamic Model to Predict Construction Status in Iran Using Sustainable Development Indicators [ Vol.17, Issue 3 - Summer Year 2021]
  • Gupta.Neha Reliability optimization problems with multiple constraints under fuzziness [ Vol.12, Issue 4 - Autumn Year 2016]
  • Gupta.S Development of simulation model for performance evaluation of feed water system in a typical thermal power plant [ Vol.7, Issue 12 - Spring Year 2011]

H

  • hadighi.seyed ali Mahalanobis-Taguchi System-based criteria selection for strategy formulation: a case in a training institution [ Vol.9, Issue 1 - Winter Year 2013]
  • Hadji Molana.Seyyed Mohammad A reverse logistics chain mathematical model for a sustainable production system of perishable goods based on demand optimization [ Vol.15, Issue 4 - Autumn Year 2019]
  • Hafezalkotob.Ashkan Nash equilibrium strategy in the deregulated power industry and comparing its lost welfare with Iran wholesale electricity market [ Vol.12, Issue 4 - Autumn Year 2016]
  • Hafezalkotob.Ashkan Cooperative vehicle routing problem: an opportunity for cost saving [ Vol.12, Issue 3 - Summer Year 2016]
  • Hafezalkotob.Ashkan Extended MULTIMOORA method based on Shannon entropy weight for materials selection [ Vol.12, Issue 1 - Winter Year 2016]
  • Hafezalkotob.Ashkan Cooperative aggregate production planning: a game theory approach [ Vol.15, Issue 1 - Winter Year 2019]
  • Hafezalkotob.Ashkan Evaluating different scenarios for Tradable Green Certificates by game theory approaches [ Vol.15, Issue 3 - Summer Year 2019]
  • Hafezalkotob.Ashkan A Location-Routing-Inventory Model for Perishable Items Using Fresher First and Older First Inventory Management Policies [ Vol.17, Issue 1 - Winter Year 2021]
  • Hafezalkotob.Ashkan Robust DEA under discrete uncertain data: a case study of Iranian electricity distribution companies [ Vol.11, Issue 2 - Spring Year 2015]
  • Hafezalkotob.Ashkan Selection of energy source and evolutionary stable strategies for power plants under financial intervention of government [ Vol.13, Issue 3 - Summer Year 2017]
  • Hafezalkotob.Ashkan Using and comparing metaheuristic algorithms for optimizing bidding strategy viewpoint of profit maximization of generators [ Vol.11, Issue 1 - Winter Year 2015]
  • Hafezalkotob.Ashkan Analysis of implementation of Tradable Green Certificates system in a competitive electricity market: a game theory approach [ Vol.12, Issue 2 - Spring Year 2016]
  • Hafezalkotob.Ashkan Interval MULTIMOORA method with target values of attributes based on interval distance and preference degree: biomaterials selection [ Vol.13, Issue 2 - Spring Year 2017]
  • Hafezalkotob.Ashkan Impacts of government interventions on pricing policies of the dual-channel supply chain by considering retailer services [ Vol.16, Issue 2 - Spring Year 2020]
  • Hafezalkotob.Ashkan A multi-product green supply chain under government supervision with price and demand uncertainty [ Vol.16, Issue 2 - Spring Year 2020]
  • hajghasem.mahtab Determining the level of automation in the cosmetics industry considering new technology [ Vol.18, Issue 2 - Spring Year 2022]
  • haji-molana.sayyid mohammad Sustainable p-hub Median Modeling for Perishable items in presence of Fuzzy Setting [ Vol.19, Issue 3 - Summer Year 2023]
  • hamidi.mohammadreza Determining production level under uncertainty using fuzzy simulation and bootstrap technique, a case study [ Vol.13, Issue 4 - Autumn Year 2017]
  • Hanafizadeh.Payam Robust Wagner–Whitin algorithm with uncertain costs [ Vol.15, Issue 3 - Summer Year 2019]
  • harati.shima A Location-Routing-Inventory Model for Perishable Items Using Fresher First and Older First Inventory Management Policies [ Vol.17, Issue 1 - Winter Year 2021]
  • Hashemi.Seiied Mahmood The Impact of Imported Capital Goods on the Quality of Iranian Goods in the Supply Chain with Emphasis on Resistance Economy (Case Study: Textile Industry) [ Vol.17, Issue 2 - Spring Year 2021]
  • Hassani Tabatabaee.AmirReza Completion of the paper “Ranking Efficient DMUs based on single virtual inefficient DMU in DEA” [ Vol.19, Issue 3 - Summer Year 2023]
  • Hayati.Jamileh A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy [ Vol.13, Issue 2 - Spring Year 2017]
  • HEMAYATKAR.NASRIN Developing a fuzzy inference system to devise proper business strategies: a study on carpet industry [ Vol.15, Issue 3 - Summer Year 2019]
  • heydar.Maryam Advancing Organizational Efficiency: A Novel Dynamic Network DEA for Strategic Carry-Over Allocation [ Vol.19, Issue 3 - Summer Year 2023]
  • Homayounfar.Mahdi A Comparative Study of Meta-heuristic Algorithms in Supply Chain Networks [ Vol.17, Issue 1 - Winter Year 2021]
  • honarmand azimi.mortaza Modelling and robust scheduling of two-stage assembly flow shop under uncertainty in assembling times [ Vol.17, Issue 3 - Summer Year 2021]
  • Hosseini.Ahmad An optimization model for management of empty containers in distribution network of a logistics company under uncertainty [ Vol.15, Issue 4 - Autumn Year 2019]
  • Hosseini.Seyed Azim Identifying the challenges of implementing the integrated project delivery method (IPD) in large residential projects in Iran [ Vol.18, Issue 3 - Summer Year 2022]
  • Hosseinkhah.Ali Evaluation of research performance of faculty members of Islamic Azad University, using Fuzzy Delphi method [ Vol.17, Issue 4 - Autumn Year 2021]
  • Hosseinzadeh Lotfi.Farhad Practical benchmarking in DEA using artificial DMUs [ Vol.15, Issue 2 - Spring Year 2019]
  • Hosseinzadeh Lotfi.Farhad A mixed integer bi-level DEA model for bank branch performance evaluation by Stackelberg approach [ Vol.12, Issue 1 - Winter Year 2016]
  • Hosseinzadeh Lotfi.Farhad An integrated data envelopment analysis–artificial neural network approach for benchmarking of bank branches [ Vol.12, Issue 2 - Spring Year 2016]
  • Hosseinzadeh.Ali-Asghar A Robust Green multi-Channel Sustainable Supply Chain based on RFID technology with considering pricing strategy and subsidizing policies [ Vol.18, Issue 4 - Autumn Year 2022]

I

  • Ikhwana.Andri Economic Order Quantity Model for Agricultural Products with Harvest Period [ Vol.17, Issue 4 - Autumn Year 2021]
  • Islam.Ariful Risk determinants of small and medium-sized manufacturing enterprises (SMEs) - an exploratory study in New Zealand [ Vol.8, Issue 1 - Winter Year 2012]
  • Islam.Sahidul An interactive weighted fuzzy goal programming technique to solve multi-objective reliability optimization problem [ Vol.15, Issue 1 - Winter Year 2019]

J

  • Jafari.Hamed Maximizing the nurses’ preferences in nurse scheduling problem: mathematical modeling and a meta-heuristic algorithm [ Vol.11, Issue 3 - Summer Year 2015]
  • jafarzadeh ghoushchi.Saeid Evaluation and selection of sustainable suppliers in supply chain using new GP-DEA model with imprecise data [ Vol.14, Issue 3 - Summer Year 2018]
  • Jahanfarnia.Gholamreza A hierarchical heuristic method to analysis of economics and safety of a pressurized water reactor in a power market [ Vol.19, Issue 1 - Winter Year 2023]
  • Jain.Madhu Multiple vacation policy for MX/Hk/1 queue with un-reliable server [ Vol.9, Issue 1 - Winter Year 2013]
  • Jain.Madhu A time-shared machine repair problem with mixed spares under N-policy [ Vol.12, Issue 2 - Spring Year 2016]
  • Jain.Madhu Analysis of M/G/ 1 queueing model with state dependent arrival and vacation [ Vol.8, Issue 1 - Winter Year 2012]
  • Jain.Madhu (m, M) Machining system with two unreliable servers, mixed spares and common-cause failure [ Vol.11, Issue 2 - Spring Year 2015]
  • Jain.Madhu Analysis of unreliable bulk queue with statedependent arrivals [ Vol.9, Issue 1 - Winter Year 2013]
  • Jain.Madhu Unreliable bulk retrial queues with delayed repairs and modified vacation policy [ Vol.10, Issue 3 - Summer Year 2014]
  • Jain.Madhu Fault tolerant system with imperfect coverage, reboot and server vacation [ Vol.13, Issue 2 - Spring Year 2017]
  • Jain.Madhu Vacation model for Markov machine repair problem with two heterogeneous unreliable servers and threshold recovery [ Vol.14, Issue 1 - Winter Year 2018]
  • Jain.Madhu Adaptive call admission control and resource allocation in multi server wireless/cellular network [ Vol.12, Issue 1 - Winter Year 2016]
  • Jain.Madhu Threshold F-policy and N-policy for multi-component machining system with warm standbys [ Vol.9, Issue 1 - Winter Year 2013]
  • Jain.Rahul Six-sigma application in tire-manufacturing company: a case study [ Vol.14, Issue 3 - Summer Year 2018]
  • Jalilibal.Zahra Design of Control Charts for Monitoring Logistic Regression Profiles with Estimated Parameters [ Vol.17, Issue 3 - Summer Year 2021]
  • jasemi.milad An investigation of model selection criteria for technical analysis of moving average [ Vol.8, Issue 1 - Winter Year 2012]
  • Javadi Gargari.Farnaz A Multi-objective Leagile Demand-Driven Optimization Model incorporating a Reliable Omnichannel Retailer: A Case Study [ Vol.19, Issue 2 - Spring Year 2023]
  • Javadi.Maryam New spatial clustering-based models for optimal urban facility location considering geographical obstacles [ Vol.10, Issue 1 - Winter Year 2014]
  • javadi.mehrdad A reverse logistics chain mathematical model for a sustainable production system of perishable goods based on demand optimization [ Vol.15, Issue 4 - Autumn Year 2019]
  • Javadi.Mehrdad The effects of designing quality management technical standards on product maturity and excellence [ Vol.18, Issue 1 - Winter Year 2022]
  • javadian.nikbakhsh An archived multi-objective simulated annealing for a dynamic cellular manufacturing system [ Vol.10, Issue 2 - Spring Year 2014]
  • javadian.nikbakhsh A multi-objective model for designing a group layout of a dynamic cellular manufacturing system [ Vol.9, Issue 1 - Winter Year 2013]
  • Javanmard.Habibollah Optimizing the preventive maintenance scheduling by genetic algorithm based on cost and reliability in National Iranian Drilling Company [ Vol.12, Issue 4 - Autumn Year 2016]
  • javanshir.hasan A simple approach to the two-dimensional guillotine cutting stock problem [ Vol.8, Issue 1 - Winter Year 2012]
  • Jeet Singh.Charan Analysis of M/G/ 1 queueing model with state dependent arrival and vacation [ Vol.8, Issue 1 - Winter Year 2012]
  • Jeet Singh.Charan Analysis of unreliable bulk queue with statedependent arrivals [ Vol.9, Issue 1 - Winter Year 2013]
  • jolai.fariborz Pre-positioning and dynamic operations planning in pre- and post-disaster phases with lateral transhipment under uncertainty and disruption [ Vol.15, Issue 1 - Winter Year 2019]
  • jolai.fariborz Bi-product inventory planning in a three-echelon supply chain with backordering, Poisson demand, and limited warehouse space [ Vol.9, Issue 1 - Winter Year 2013]
  • Jouzdani.Javid A genetic algorithm for a bi-objective mathematical model for dynamic virtual cell formation problem [ Vol.12, Issue 3 - Summer Year 2016]
  • Jouzdani.Javid MTBF evaluation for 2-out-of-3 redundant repairable systems with common cause and cascade failures considering fuzzy rates for failures and repair: a case study of a centrifugal water pumping system [ Vol.14, Issue 2 - Spring Year 2018]

K

  • Kamaruddin.Shahrul Assessment of distance-based multi-attribute group decision-making methods from a maintenance strategy perspective [ Vol.11, Issue 1 - Winter Year 2015]
  • Kamranrad.Reza Developing new Methods to Monitor the Fuzzy Logistic Regression Profiles in Phase II (A case study in health-care) [ Vol.17, Issue 2 - Spring Year 2021]
  • Kamranrad.Reza Development of Clustering Technique and Genetic Algorithm to Monitor Multivariate Descriptive Processes based on Large-scale Nominal Contingency Tables (Case Study: Renewable Energy Process ) [ Vol.18, Issue 2 - Spring Year 2022]
  • Kar.Samarjit A production-inventory model with permissible delay incorporating learning effect in random planning horizon using genetic algorithm [ Vol.11, Issue 4 - Autumn Year 2015]
  • karbasian.mahdi Developing an economical model for reliability allocation of an electro-optical system by considering reliability improvement difficulty, criticality, and subsystems dependency [ Vol.15, Issue 2 - Spring Year 2019]
  • Kareem.Buliaminu Development of hardware system using temperature and vibration maintenance models integration concepts for conventional machines monitoring: a case study [ Vol.12, Issue 1 - Winter Year 2016]
  • Karimi Mehrabadi.Reza Location of facilities in the design of the global logistics hub network taking into account the time discount coefficient [ Vol.18, Issue 4 - Autumn Year 2022]
  • Karimi.Hossein Effective heuristics and meta-heuristics for the quadratic assignment problem with tuned parameters and analytical comparisons [ Vol.8, Issue 1 - Winter Year 2012]
  • Karimi.Kaveh A hierarchical heuristic method to analysis of economics and safety of a pressurized water reactor in a power market [ Vol.19, Issue 1 - Winter Year 2023]
  • Kazemipoor.Hamed Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry [ Vol.18, Issue 4 - Autumn Year 2022]
  • khajeh.mostafa Developing a bi-objective optimization model for solving the availability allocation problem in repairable series–parallel systems by NSGA II [ Vol.12, Issue 1 - Winter Year 2016]
  • Khaksari.Negin A new control chart based on discriminant analysis for simple linear profiles monitoring [ Vol.16, Issue 4 - Autumn Year 2020]
  • Khalaj.Fereshteh A novel risk-based analysis for the production system under epistemic uncertainty [ Vol.9, Issue 1 - Winter Year 2013]
  • khalaj.mehran A novel risk-based analysis for the production system under epistemic uncertainty [ Vol.9, Issue 1 - Winter Year 2013]
  • khalili damghani.kaveh A Multi-Period Berth Allocation-Scheduling Model with Different Terminals and Irregular Layouts Under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]
  • Khalili.Amir Evaluation of research performance of faculty members of Islamic Azad University, using Fuzzy Delphi method [ Vol.17, Issue 4 - Autumn Year 2021]
  • Khalili-Damghani.Kaveh Developing a fuzzy inference system to devise proper business strategies: a study on carpet industry [ Vol.15, Issue 3 - Summer Year 2019]
  • Khanna.Rajesh Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory [ Vol.11, Issue 4 - Autumn Year 2015]
  • khatami firoozabadi.seyed mahammad ali A Pattern for Sustainable Development from Perspective of Stakeholders Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • Khatami Firouzabadi.Seyed Mohammad Ali A Pattern for Sustainable Development from Perspective of Stakeholders Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • Khedmati.Majid Identifying the time of a step change in AR(1) auto-correlated simple linear profiles [ Vol.11, Issue 4 - Autumn Year 2015]
  • Khedmati.Majid Town trip forecasting based on data mining techniques [ Vol.16, Issue 4 - Autumn Year 2020]
  • Khedmati.Majid Identifying the change time of multivariate binomial processes for step changes and drifts [ Vol.9, Issue 1 - Winter Year 2013]
  • khodadadi.maryam Allocation models for DMUs with negative data [ Vol.9, Issue 1 - Winter Year 2013]
  • Khoshnevis.Mitra Designing a Dynamic Model of Banking Services Sustainable Supply Chain Management Using System Dynamics (Case Study: Mehr Iran Bank) [ Vol.18, Issue 3 - Summer Year 2022]
  • KiA.Reza Robust optimization of a mathematical model to design a dynamic cell formation problem considering labor utilization [ Vol.12, Issue 1 - Winter Year 2016]
  • KiA.Reza An archived multi-objective simulated annealing for a dynamic cellular manufacturing system [ Vol.10, Issue 2 - Spring Year 2014]
  • KiA.Reza A multi-objective model for designing a group layout of a dynamic cellular manufacturing system [ Vol.9, Issue 1 - Winter Year 2013]
  • Kiani Ghalehno.Rouhollah Modification of the EDAS method for controlling outlier data [ Vol.17, Issue 3 - Summer Year 2021]
  • Kimiagari.Ali Mohammad Distribution network design under demand uncertainty using genetic algorithm and Monte Carlo simulation approach: a case study in pharmaceutical industry [ Vol.10, Issue 1 - Winter Year 2014]
  • Kimiagari.Ali Mohammad Distribution network design under demand uncertainty using genetic algorithm and Monte Carlo simulation approach: a case study in pharmaceutical industry [ Vol.10, Issue 2 - Spring Year 2014]
  • kodestani.fereshte Evaluation of research performance of faculty members of Islamic Azad University, using Fuzzy Delphi method [ Vol.17, Issue 4 - Autumn Year 2021]
  • Kolahan.Farhad Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts [ Vol.12, Issue 2 - Spring Year 2016]
  • kouchaki tajani.elham A Robust Green multi-Channel Sustainable Supply Chain based on RFID technology with considering pricing strategy and subsidizing policies [ Vol.18, Issue 4 - Autumn Year 2022]
  • Kumar.Amit Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology [ Vol.14, Issue 4 - Autumn Year 2018]
  • Kumar.D Multi-factor failure mode critically analysis using TOPSIS [ Vol.5, Issue 8 - Summer Year 2009]
  • Kumar.D Steady state behavior and maintenance planning of bleaching system in a paper plant [ Vol.7, Issue 12 - Spring Year 2011]
  • Kumar.Gireesh Inventory Management of Automotive Industries using ABC Analysis: A Systematic Approach [ Vol.18, Issue 3 - Summer Year 2022]
  • kumar.Jitendra Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology [ Vol.14, Issue 4 - Autumn Year 2018]
  • Kumar.Naveen Reliability analysis of a robotic system using hybridized technique [ Vol.14, Issue 3 - Summer Year 2018]
  • Kumar.P Multi-factor failure mode critically analysis using TOPSIS [ Vol.5, Issue 8 - Summer Year 2009]
  • Kumar.Rajesh Analysis of critical drivers affecting implementation of agent technology in a manufacturing system [ Vol.15, Issue 2 - Spring Year 2019]
  • Kumar.Rakesh An inventory model for deteriorating items with time-dependent demand and time-varying holding cost under partial backlogging [ Vol.9, Issue 1 - Winter Year 2013]
  • kumar.Ravinder Cost analysis of a coal-fired power plant using the NPV method [ Vol.11, Issue 4 - Autumn Year 2015]
  • Kumar.S Performance evaluation and availability analysis of ammonia synthesis unit in a fertilizer plant [ Vol.5, Issue 9 - Autumn Year 2009]
  • KUMAR.SANJAY Customer involvement in greening the supply chain: an interpretive structural modeling methodology [ Vol.9, Issue 1 - Winter Year 2013]
  • kumar.sanjeev Mathematical modeling and fuzzy availability analysis for serial processes in the crystallization system of a sugar plant [ Vol.13, Issue 1 - Winter Year 2017]
  • kumar.sanjeev Markov modeling and reliability analysis of urea synthesis system of a fertilizer plant [ Vol.11, Issue 1 - Winter Year 2015]
  • kumar.vijay Scheduling of flexible manufacturing systems using genetic algorithm: A heuristic approach [ Vol.7, Issue 14 - Summer Year 2011]
  • Kumar.Vikas An experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach [ Vol.11, Issue 3 - Summer Year 2015]
  • Kumar.Vinod An experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach [ Vol.11, Issue 3 - Summer Year 2015]

L

  • lachhwani.kailash Mathematical solution of multilevel fractional programming problem with fuzzy goal programming approach [ Vol.8, Issue 1 - Winter Year 2012]
  • lachhwani.kailash Modified FGP approach and MATLAB program for solving multi-level linear fractional programming problems [ Vol.11, Issue 1 - Winter Year 2015]
  • Leiras.Adriana EPQ model with inspection of batches and disposal of defective items [ Vol.17, Issue 2 - Spring Year 2021]
  • Li.H Correlation coefficient of intuitionistic fuzzy sets [ Vol.3, Issue 5 - Autumn Year 2007]
  • Linfati.Rodrigo Optimization model for remanufacturing in a real sawmill [ Vol.16, Issue 4 - Autumn Year 2020]

M

  • M.M.Senthil Kumar DESIGN OF AN INTEGRATED IN-LINE TRACEABILITY AND ERP SYSTEM – A CASE STUDY APPROACH [ Vol.17, Issue 4 - Autumn Year 2021]
  • Mahapatra.Siba Sankar Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • Mahapatra.Siba Sankar An integrated approach for scheduling flexible job-shop using teaching–learning-based optimization method [ Vol.16, Issue 1 - Winter Year 2020]
  • Mahdavi Mazdeh.Mohammad A heuristic method for consumable resource allocation in multi-class dynamic PERT networks [ Vol.9, Issue 1 - Winter Year 2013]
  • Mahdavi.Iraj A genetic algorithm for a bi-objective mathematical model for dynamic virtual cell formation problem [ Vol.12, Issue 3 - Summer Year 2016]
  • Mahdavi.Iraj A meta-heuristic approach supported by NSGA-II for the design and plan of supply chain networks considering new product development [ Vol.14, Issue 1 - Winter Year 2018]
  • Mahdavi.Iraj Mahalanobis-Taguchi System-based criteria selection for strategy formulation: a case in a training institution [ Vol.9, Issue 1 - Winter Year 2013]
  • Mahdavi.Iraj Optimizing decentralized production–distribution planning problem in a multi-period supply chain network under uncertainty [ Vol.14, Issue 2 - Spring Year 2018]
  • Mahdavi.Zahra A Multi-Period Berth Allocation-Scheduling Model with Different Terminals and Irregular Layouts Under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]
  • Mahdavi-Amiri.Nezam Multiple utility constrained multi-objective programs using Bayesian theory [ Vol.14, Issue 1 - Winter Year 2018]
  • Mahdavi-Amiri.Nezam Optimizing decentralized production–distribution planning problem in a multi-period supply chain network under uncertainty [ Vol.14, Issue 2 - Spring Year 2018]
  • Mahmoudi.Reza Selection of energy source and evolutionary stable strategies for power plants under financial intervention of government [ Vol.13, Issue 3 - Summer Year 2017]
  • Mahmoudzadeh.Mahmoud Impact of information technology on productivity and efficiency in Iranian manufacturing industries [ Vol.11, Issue 1 - Winter Year 2015]
  • Makui.A A multi agent method for cell formation with uncertain situation, based on information theory [ Vol.7, Issue 14 - Summer Year 2011]
  • Makui.A Practical common weights MOLP approach for efficiency analysis [ Vol.4, Issue 6 - Summer Year 2008]
  • Makui.A Ideal and anti-ideal decision making units: A fuzzy DEA approach [ Vol.6, Issue 10 - Summer Year 2010]
  • Makui.A An MCDM-DEA approach for technology selection [ Vol.7, Issue 12 - Spring Year 2011]
  • Makui.A Analysis of lumpiness phenomenon in MRP [ Vol.6, Issue 10 - Summer Year 2010]
  • Makui.A A new heuristic approach to solve product mix problems in a multi-bottleneck system [ Vol.5, Issue 9 - Autumn Year 2009]
  • Makui.Ahmad Optimization of rotor shaft shrink fit method for motor using “Robust design” [ Vol.14, Issue 4 - Autumn Year 2018]
  • Makui.Ahmad A simple approach to the two-dimensional guillotine cutting stock problem [ Vol.8, Issue 1 - Winter Year 2012]
  • Makui.Ahmad A firefly algorithm for solving competitive location-design problem: a case study [ Vol.12, Issue 4 - Autumn Year 2016]
  • Makui.Ahmad Models, solution, methods and their applicability of dynamic location problems (DLPs) (a gap analysis for further research) [ Vol.12, Issue 3 - Summer Year 2016]
  • Makui.Ahmad Analysis of implementation of Tradable Green Certificates system in a competitive electricity market: a game theory approach [ Vol.12, Issue 2 - Spring Year 2016]
  • Makui.Ahmad Solving an one-dimensional cutting stock problem by simulated annealing and tabu search [ Vol.8, Issue 1 - Winter Year 2012]
  • Makui.Ahmad Designing a multi-objective nonlinear cross-docking location allocation model using genetic algorithm [ Vol.2, Issue 3 - Summer Year 2006]
  • Maleki.Mohammad Reza Step change point estimation in the multivariate-attribute process variability using artificial neural networks and maximum likelihood estimation [ Vol.11, Issue 4 - Autumn Year 2015]
  • Malekmohammadi.Najmeh Characterizing a Subset of the PPS with Radial Projection Point on a Prespecified Hyperplane [ Vol.18, Issue 1 - Winter Year 2022]
  • Mauluddin.Yusuf Economic Order Quantity Model for Agricultural Products with Harvest Period [ Vol.17, Issue 4 - Autumn Year 2021]
  • Mekky.Marwa Risk Assessment of Bridge Construction Project through cost management phases [ Vol.17, Issue 1 - Winter Year 2021]
  • Milani Tabrizi.Matin Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry [ Vol.18, Issue 4 - Autumn Year 2022]
  • Mirabi.Mohammad A novel hybrid genetic algorithm to solve the make-to-order sequence-dependent flow-shop scheduling problem [ Vol.10, Issue 2 - Spring Year 2014]
  • Mirhosseini.S.Mohammad Providing a System Dynamic Model to Predict Construction Status in Iran Using Sustainable Development Indicators [ Vol.17, Issue 3 - Summer Year 2021]
  • Mirjafari.Masoumeh Aircraft routing problem considering various maintenance operation factors: A literature review [ Vol.19, Issue 1 - Winter Year 2023]
  • Mirzaei.Ehsan Exact algorithms for solving a bi-level location–allocation problem considering customer preferences [ Vol.15, Issue 3 - Summer Year 2019]
  • Modiri.Mahmoud A three-stage assembly flow shop scheduling problem with blocking and sequence-dependent set up times [ Vol.8, Issue 1 - Winter Year 2012]
  • Moeeni.Hojjat The effects of designing quality management technical standards on product maturity and excellence [ Vol.18, Issue 1 - Winter Year 2022]
  • Mohamadi.Hamidreza A Hybrid Mehta-Heuristic algorithm for optimization location-routing problem of facilities in four echelon supply chain [ Vol.16, Issue 4 - Autumn Year 2020]
  • Mohammad Cyrus.Kaveh A Novel Hybrid Approach to Enhance Intelligence Integration in Small-Medium Enterprises [ Vol.17, Issue 2 - Spring Year 2021]
  • mohammadi.mehdi Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function [ Vol.11, Issue 2 - Spring Year 2015]
  • Mohammadi.Nabiallah Supply Chain Risk Assessment of Steel Industry Using Hybrid Type Fuzzy TOPSIS Approach and Fuzzy Hierarchical Analysis [ Vol.19, Issue 1 - Winter Year 2023]
  • mohtashami.ali A Hybrid Mehta-Heuristic algorithm for optimization location-routing problem of facilities in four echelon supply chain [ Vol.16, Issue 4 - Autumn Year 2020]
  • Mohtashami.Ali Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation [ Vol.19, Issue 2 - Spring Year 2023]
  • mojibian.fatemeh Integration of QFD, AHP, and LPP methods in supplier development problems under uncertainty [ Vol.10, Issue 1 - Winter Year 2014]
  • Mongeri.Nassim Supply Chain Coordination with Wholesale contract in an Uncertain Environment [ Vol.19, Issue 4 - Autumn Year 2023]
  • Moreira.Ludmylla EPQ model with inspection of batches and disposal of defective items [ Vol.17, Issue 2 - Spring Year 2021]
  • Mosleh Shirazi.Ali Naghi Two models of inventory control with supplier selection in case of multiple sourcing: a case of Isfahan Steel Company [ Vol.12, Issue 2 - Spring Year 2016]
  • Mosleh.Maryam A new statistical method for design and analyses of component tolerance [ Vol.13, Issue 1 - Winter Year 2017]
  • Moslemi.Amir Simultaneous robust estimation of multi-response surfaces in the presence of outliers [ Vol.9, Issue 1 - Winter Year 2013]
  • Moslemi.Amir The analysis of residuals variation and outliers to obtain robust response surface [ Vol.9, Issue 1 - Winter Year 2013]
  • Moslemipour.Ghorbanali A hybrid CS-SA intelligent approach to solve uncertain dynamic facility layout problems considering dependency of demands [ Vol.14, Issue 2 - Spring Year 2018]
  • Mostafaee.Amin Characterizing a Subset of the PPS with Radial Projection Point on a Prespecified Hyperplane [ Vol.18, Issue 1 - Winter Year 2022]
  • Mousavi.Maryam The application of fuzzy Delphi and fuzzy inference system in supplier ranking and selection [ Vol.10, Issue 3 - Summer Year 2014]
  • Mousavi.Seyed Hosein Using and comparing metaheuristic algorithms for optimizing bidding strategy viewpoint of profit maximization of generators [ Vol.11, Issue 1 - Winter Year 2015]
  • Mousavi.Seyyed Farid A Multi-Period Berth Allocation-Scheduling Model with Different Terminals and Irregular Layouts Under Uncertainty [ Vol.17, Issue 4 - Autumn Year 2021]
  • MOUSS.Kinza Nadia MOUSS A probabilistic hybrid methodology for the management and control of risks related to the production system: Case of industrial textiles [ Vol.19, Issue 1 - Winter Year 2023]
  • musavipour.Zahra Design of Control Charts for Monitoring Logistic Regression Profiles with Estimated Parameters [ Vol.17, Issue 3 - Summer Year 2021]

N

  • najafi.Esmaeil An electromagnetism-like metaheuristic for open-shop problems with no buffer [ Vol.8, Issue 1 - Winter Year 2012]
  • Najafi.Seyed Esmaeil Examining the impact of customer satisfaction with after-sales service on corporate profitability [ Vol.18, Issue 1 - Winter Year 2022]
  • najafi.Seyed esmaeil Sustainable p-hub Median Modeling for Perishable items in presence of Fuzzy Setting [ Vol.19, Issue 3 - Summer Year 2023]
  • najafi.Seyed esmaeil Designing a model of product arrangement and multi-warehouse location-routing problem [ Vol.18, Issue 2 - Spring Year 2022]
  • najafi.Seyed esmaeil Designing a sustainable integrated production system model under uncertainty considering the discount in production outsourcing costs [ Vol.18, Issue 4 - Autumn Year 2022]
  • Nasrollahpourniazi.Fatemeh A new mathematical model for gate assignment problem considering transit passengers and safety constraints: Benders decomposition approach [ Vol.16, Issue 4 - Autumn Year 2020]
  • Nazemi.Ali Nash equilibrium strategy in the deregulated power industry and comparing its lost welfare with Iran wholesale electricity market [ Vol.12, Issue 4 - Autumn Year 2016]
  • Nazemi.Ali Using and comparing metaheuristic algorithms for optimizing bidding strategy viewpoint of profit maximization of generators [ Vol.11, Issue 1 - Winter Year 2015]
  • Nebhnani.Rajat Inventory Management of Automotive Industries using ABC Analysis: A Systematic Approach [ Vol.18, Issue 3 - Summer Year 2022]
  • niknaghsh.ebrahim Completion of the paper “Ranking Efficient DMUs based on single virtual inefficient DMU in DEA” [ Vol.19, Issue 3 - Summer Year 2023]
  • Nobakhti.Abolghasem Assessing the reliability of dynamic systems for safety units recovering flare gas, considering covariates [ Vol.18, Issue 4 - Autumn Year 2022]
  • Noorossana.Rassoul Performance of Cluster-Based Logistic Profile Monitoring Under Existence of Different Linkage Functions [ Vol.19, Issue 3 - Summer Year 2023]
  • Noorossana.Rassoul Prognosis of Failure Time in Gas Turbines regarding multi time scales [ Vol.17, Issue 4 - Autumn Year 2021]
  • NOOROSSANA.RASSOUL An ex ante control chart for project monitoring using earned duration management observations [ Vol.14, Issue 4 - Autumn Year 2018]
  • NOOROSSANA.RASSOUL Bayesian change point estimation in Poisson-based control charts [ Vol.9, Issue 1 - Winter Year 2013]
  • NOOROSSANA.RASSOUL Robust Cluster-Based method for monitoring generalized linear profiles in phase I [ Vol.17, Issue 1 - Winter Year 2021]
  • Nouri Koupaei.mehrdad A new binary model for university examination timetabling: a case study [ Vol.8, Issue 1 - Winter Year 2012]

O

  • Oh.Seeung Neurological Measurement of Human Trust in Automation Using Electroencephalogram [ Vol.18, Issue 3 - Summer Year 2022]
  • Owlia.Mohammad Saleh Interpretive Structural Modeling (ISM) of Intellectual Capital Components [ Vol.16, Issue 4 - Autumn Year 2020]

P

  • Park.Sangsung Neurological Measurement of Human Trust in Automation Using Electroencephalogram [ Vol.18, Issue 3 - Summer Year 2022]
  • Parpanchi.Reza Supply Chain Risk Assessment of Steel Industry Using Hybrid Type Fuzzy TOPSIS Approach and Fuzzy Hierarchical Analysis [ Vol.19, Issue 1 - Winter Year 2023]
  • pilevari.nazanin System Dynamics Modeling and Simulation to Analyze the Role of Solar Energy in Secure Access to Sustainability [ Vol.17, Issue 1 - Winter Year 2021]
  • pilevari.nazanin Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation [ Vol.19, Issue 2 - Spring Year 2023]
  • piroozfar.shahnaz Location of facilities in the design of the global logistics hub network taking into account the time discount coefficient [ Vol.18, Issue 4 - Autumn Year 2022]
  • Pishvaee.Mir Saman A robust multi-objective global supplier selection model under currency fluctuation and price discount [ Vol.13, Issue 2 - Spring Year 2017]
  • Piya.Sujan Quantitative risk management in gas injection project: a case study from Oman oil and gas industry [ Vol.14, Issue 3 - Summer Year 2018]
  • Pourebrahimi.Alireza The role of web-based systems in improving business processes using simulation approach (Case study: Credit card) [ Vol.17, Issue 2 - Spring Year 2021]
  • Pourghader Chobar.Adel Fuzzy modeling of allocation of financial resources of sustainable projects and Solving with GSSA algorithm [ Vol.19, Issue 1 - Winter Year 2023]
  • Pradenas.Lorena Optimization model for remanufacturing in a real sawmill [ Vol.16, Issue 4 - Autumn Year 2020]
  • Pramanik.Surapati TOPSIS approach to linear fractional bi-level MODM problem based on fuzzy goal programming [ Vol.10, Issue 4 - Autumn Year 2014]

R

  • Rabani.Masoud A Facility Location Problem in a Green Closed-Loop Supply Chain Network Design by Considering Defective Products [ Vol.18, Issue 1 - Winter Year 2022]
  • Radfar.Reza Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation [ Vol.19, Issue 2 - Spring Year 2023]
  • Rafiei.Hamed Bi-product inventory planning in a three-echelon supply chain with backordering, Poisson demand, and limited warehouse space [ Vol.9, Issue 1 - Winter Year 2013]
  • Rafiei.Hamed A multi-objective genetic algorithm for a mixed-model assembly U-line balancing type-I problem considering human-related issues, training, and learning [ Vol.12, Issue 4 - Autumn Year 2016]
  • Rafiei.Hamed Multi-site production planning in hybrid make-to-stock/make-to-order production environment [ Vol.10, Issue 3 - Summer Year 2014]
  • Raghav.Dhruv Performance assessment of a complex repairable system with k-out-of-n: G operational scheme and copula repair approach [ Vol.18, Issue 3 - Summer Year 2022]
  • Raghuram.P DESIGN OF AN INTEGRATED IN-LINE TRACEABILITY AND ERP SYSTEM – A CASE STUDY APPROACH [ Vol.17, Issue 4 - Autumn Year 2021]
  • Rahkhoday Badrani.Mitra Identifying the challenges of implementing the integrated project delivery method (IPD) in large residential projects in Iran [ Vol.18, Issue 3 - Summer Year 2022]
  • Rahmawati.Dewi Economic Order Quantity Model for Agricultural Products with Harvest Period [ Vol.17, Issue 4 - Autumn Year 2021]
  • Raissi.Sadigh Performance of Cluster-Based Logistic Profile Monitoring Under Existence of Different Linkage Functions [ Vol.19, Issue 3 - Summer Year 2023]
  • Raissi.Sadigh Robust Cluster-Based method for monitoring generalized linear profiles in phase I [ Vol.17, Issue 1 - Winter Year 2021]
  • Raissi.Sadigh Assessing the reliability of dynamic systems for safety units recovering flare gas, considering covariates [ Vol.18, Issue 4 - Autumn Year 2022]
  • Raissi.Sadigh Prognosis of Failure Time in Gas Turbines regarding multi time scales [ Vol.17, Issue 4 - Autumn Year 2021]
  • Raissi.Sadigh The effects of designing quality management technical standards on product maturity and excellence [ Vol.18, Issue 1 - Winter Year 2022]
  • rashidi komijan.alireza A new binary model for university examination timetabling: a case study [ Vol.8, Issue 1 - Winter Year 2012]
  • Rashidi.Ali Reza A new mathematical model for gate assignment problem considering transit passengers and safety constraints: Benders decomposition approach [ Vol.16, Issue 4 - Autumn Year 2020]
  • Rashidi.Ali Reza A multi-product, multi-period and multi-hub routing and scheduling model for offshore logistics [ Vol.19, Issue 2 - Spring Year 2023]
  • Rashidi.Ali Reza A heuristic algorithm for solving bi-level programming problems with application to large-scale location-arc routing in urban traffic lights maintenance [ Vol.19, Issue 2 - Spring Year 2023]
  • Rashidi.Ali Reza Aircraft routing problem considering various maintenance operation factors: A literature review [ Vol.19, Issue 1 - Winter Year 2023]
  • Rastgar.AbbasAli Dynamics of the Digital Banking Ecosystem in Iran [ Vol.19, Issue 4 - Autumn Year 2023]
  • Razavyan.Shabnam An L1-norm method for generating all of efficient solutions of multi-objective integer linear programming problem [ Vol.8, Issue 1 - Winter Year 2012]
  • Razi.Mehdi A multi-product, multi-period and multi-hub routing and scheduling model for offshore logistics [ Vol.19, Issue 2 - Spring Year 2023]
  • Roghanian.Emad A Location-Routing-Inventory Model for Perishable Items Using Fresher First and Older First Inventory Management Policies [ Vol.17, Issue 1 - Winter Year 2021]
  • Roghanian.Emad Location of facilities in the design of the global logistics hub network taking into account the time discount coefficient [ Vol.18, Issue 4 - Autumn Year 2022]
  • Roghanian.Emad Integration of QFD, AHP, and LPP methods in supplier development problems under uncertainty [ Vol.10, Issue 1 - Winter Year 2014]
  • roshani.kosar Interpretive Structural Modeling (ISM) of Intellectual Capital Components [ Vol.16, Issue 4 - Autumn Year 2020]

S

  • Saati.saber Data envelopment analysis in service quality evaluation: an empirical study [ Vol.11, Issue 3 - Summer Year 2015]
  • Saati.saber Ideal and anti-ideal decision making units: A fuzzy DEA approach [ Vol.6, Issue 10 - Summer Year 2010]
  • Sadat Hosseini Khajouei.Mohammad Hossein Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation [ Vol.19, Issue 2 - Spring Year 2023]
  • Sadat Khorasgani.Sayyed Mahdi Developing a cellular manufacturing model considering the alternative routes, tool assignment, and machine reliability [ Vol.14, Issue 3 - Summer Year 2018]
  • Sadegheih.Ahmad A modified NSGA-II solution for a new multi-objective hub maximal covering problem under uncertain shipments [ Vol.10, Issue 4 - Autumn Year 2014]
  • sadeghi.alireza Fuzzy modeling of allocation of financial resources of sustainable projects and Solving with GSSA algorithm [ Vol.19, Issue 1 - Winter Year 2023]
  • sadeghi.saeed Designing a model of product arrangement and multi-warehouse location-routing problem [ Vol.18, Issue 2 - Spring Year 2022]
  • Sadjadi.Seyed Jafar A multi-product, multi-period model to select supplier for deteriorating products while considering uncertainty as well as backorder [ Vol.16, Issue 3 - Summer Year 2020]
  • Sadjadi.Seyed Jafar Analysis of Labor-Management Negotiation based on Chicken Evolutionary Game and Catastrophe Theory [ Vol.16, Issue 4 - Autumn Year 2020]
  • Sadjadi.Seyed Jafar Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function [ Vol.11, Issue 2 - Spring Year 2015]
  • saeidi mobarakeh.zahra A Multi-objective Leagile Demand-Driven Optimization Model incorporating a Reliable Omnichannel Retailer: A Case Study [ Vol.19, Issue 2 - Spring Year 2023]
  • Sahani.Suresh Performance assessment of a complex repairable system with k-out-of-n: G operational scheme and copula repair approach [ Vol.18, Issue 3 - Summer Year 2022]
  • Sahebjamnia.Navid Mahalanobis-Taguchi System-based criteria selection for strategy formulation: a case in a training institution [ Vol.9, Issue 1 - Winter Year 2013]
  • Sajadi.Seyed Mojtaba Sustainable p-hub Median Modeling for Perishable items in presence of Fuzzy Setting [ Vol.19, Issue 3 - Summer Year 2023]
  • salahi.fariba A Comparative Study of Meta-heuristic Algorithms in Supply Chain Networks [ Vol.17, Issue 1 - Winter Year 2021]
  • saleh.hilda A mixed integer bi-level DEA model for bank branch performance evaluation by Stackelberg approach [ Vol.12, Issue 1 - Winter Year 2016]
  • Salihu Isa.Muhammad Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • Salihu Isa.Muhammad Measures of Repairable Series-Parallel Computer Network with Fault Tolerant Device via Copula [ Vol.19, Issue 3 - Summer Year 2023]
  • samiee.Roohalla Developing a fuzzy inference system to devise proper business strategies: a study on carpet industry [ Vol.15, Issue 3 - Summer Year 2019]
  • Samouei.Parvaneh Robust Scheduling and Planning of Operating Rooms and Sterilization Unit with Emergency and Elective Patients: Two Metaheuristic Algorithms [ Vol.19, Issue 2 - Spring Year 2023]
  • Saniee Monfared.Mohammad Ali Network DEA: an application to analysis of academic performance [ Vol.9, Issue 1 - Winter Year 2013]
  • Saniee Monfared.Mohammad Ali A new adaptive exponential smoothing method for non-stationary time series with level shifts [ Vol.10, Issue 4 - Autumn Year 2014]
  • Sankar Mahapatra.Siba Improved teaching–learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems [ Vol.14, Issue 3 - Summer Year 2018]
  • Saremian.Davood Performance of Cluster-Based Logistic Profile Monitoring Under Existence of Different Linkage Functions [ Vol.19, Issue 3 - Summer Year 2023]
  • Saremian.Davood Robust Cluster-Based method for monitoring generalized linear profiles in phase I [ Vol.17, Issue 1 - Winter Year 2021]
  • Seifbarghy.Mehdi Bi-objective optimization of multi-server intermodal hub-location-allocation problem in congested systems: modeling and solution [ Vol.15, Issue 2 - Spring Year 2019]
  • Seifbarghy.Mehdi A discrete particle swarm optimization algorithm with local search for a production-based two-echelon single-vendor multiple-buyer supply chain [ Vol.12, Issue 1 - Winter Year 2016]
  • Seifi.Hamidreza A Novel Hybrid Approach to Enhance Intelligence Integration in Small-Medium Enterprises [ Vol.17, Issue 2 - Spring Year 2021]
  • Seong.Younho Neurological Measurement of Human Trust in Automation Using Electroencephalogram [ Vol.18, Issue 3 - Summer Year 2022]
  • Sepehri.Arash Joint pricing and replenishment decisions in an inventory model for deteriorating items considering wastewater treatment: A case study [ Vol.19, Issue 1 - Winter Year 2023]
  • Setak.Mostafa Incentive mechanism based on cooperative advertising for cost information sharing in a supply chain with competing retailers [ Vol.14, Issue 2 - Spring Year 2018]
  • seyedhamzeh.Maryam Modelling and robust scheduling of two-stage assembly flow shop under uncertainty in assembling times [ Vol.17, Issue 3 - Summer Year 2021]
  • Shafaei.Rasoul A new robust counterpart model for uncertain linear programming problems [ Vol.18, Issue 2 - Spring Year 2022]
  • shafiee.morteza A mixed integer bi-level DEA model for bank branch performance evaluation by Stackelberg approach [ Vol.12, Issue 1 - Winter Year 2016]
  • Shafiq.Muhammad Role of batch size in scheduling optimization of flexible manufacturing system using genetic algorithm [ Vol.16, Issue 1 - Winter Year 2020]
  • shahdoust.saeed Designing a sustainable integrated production system model under uncertainty considering the discount in production outsourcing costs [ Vol.18, Issue 4 - Autumn Year 2022]
  • Shahriari.Mohammadreza Multi-objective optimization of discrete time–cost tradeoff problem in project networks using non-dominated sorting genetic algorithm [ Vol.12, Issue 2 - Spring Year 2016]
  • Shahriari.Mohammadreza JIT single machine scheduling problem with periodic preventive maintenance [ Vol.12, Issue 3 - Summer Year 2016]
  • Shahrokhi.Mahmood An availability-based design optimization by using a fuzzy goal programming approach [ Vol.19, Issue 4 - Autumn Year 2023]
  • Shams Gharneh.Naser A Novel Hybrid Approach to Enhance Intelligence Integration in Small-Medium Enterprises [ Vol.17, Issue 2 - Spring Year 2021]
  • shamsi.abbas Solving an one-dimensional cutting stock problem by simulated annealing and tabu search [ Vol.8, Issue 1 - Winter Year 2012]
  • Shamsuzzoha.AHM Quantitative risk management in gas injection project: a case study from Oman oil and gas industry [ Vol.14, Issue 3 - Summer Year 2018]
  • Sharifi.Mani JIT single machine scheduling problem with periodic preventive maintenance [ Vol.12, Issue 3 - Summer Year 2016]
  • Sharma.Neeraj Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory [ Vol.11, Issue 4 - Autumn Year 2015]
  • sharma.richa Inventory Management of Automotive Industries using ABC Analysis: A Systematic Approach [ Vol.18, Issue 3 - Summer Year 2022]
  • Sharma.Richa Multiple vacation policy for MX/Hk/1 queue with un-reliable server [ Vol.9, Issue 1 - Winter Year 2013]
  • Sheikh-el-Eslami.Mohamad Kazem A hierarchical heuristic method to analysis of economics and safety of a pressurized water reactor in a power market [ Vol.19, Issue 1 - Winter Year 2023]
  • SHERAFATI.MAHTAB Closed loop supply chain network design with fuzzy tactical decisions [ Vol.12, Issue 3 - Summer Year 2016]
  • Shirani Bidabadi.Hossein Multivariate incapability index for high technology manufacturing processes in presence of the measurement errors: A case study in electronic industry [ Vol.17, Issue 1 - Winter Year 2021]
  • Shirazi.Hossein An archived multi-objective simulated annealing for a dynamic cellular manufacturing system [ Vol.10, Issue 2 - Spring Year 2014]
  • Shirazi.Hossein A multi-objective model for designing a group layout of a dynamic cellular manufacturing system [ Vol.9, Issue 1 - Winter Year 2013]
  • Shirzadi.Shima Optimizing a sustainable inventory-routing problem in tomato agri-chain considering postharvest biological behavior [ Vol.17, Issue 2 - Spring Year 2021]
  • Shishebori.davood Shrinkage simplex-centroid designs for a quadratic mixture model [ Vol.14, Issue 1 - Winter Year 2018]
  • Shoja.Ahmad Aircraft routing problem considering various maintenance operation factors: A literature review [ Vol.19, Issue 1 - Winter Year 2023]
  • shoja.naghi JIT single machine scheduling problem with periodic preventive maintenance [ Vol.12, Issue 3 - Summer Year 2016]
  • Shoja.Naghi Improving discrimination power based on reducing dispersion of weights in data envelopment analysis [ Vol.18, Issue 2 - Spring Year 2022]
  • Shokouhifar.Mohammad A Comparative Study of Meta-heuristic Algorithms in Supply Chain Networks [ Vol.17, Issue 1 - Winter Year 2021]
  • Shokrollahpour.elsa An integrated data envelopment analysis–artificial neural network approach for benchmarking of bank branches [ Vol.12, Issue 2 - Spring Year 2016]
  • Shukla.Shalini A time-shared machine repair problem with mixed spares under N-policy [ Vol.12, Issue 2 - Spring Year 2016]
  • Sing.Manas Ranjan Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • Singamsetty.Purusotham Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems [ Vol.18, Issue 4 - Autumn Year 2022]
  • Singh.Ajit Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory [ Vol.11, Issue 4 - Autumn Year 2015]
  • Singh.Rajwinder The impact of interwoven integration practices on supply chain value addition and firm performance [ Vol.15, Issue 1 - Winter Year 2019]
  • SINGH.VIJAY Performance assessment of a complex repairable system with k-out-of-n: G operational scheme and copula repair approach [ Vol.18, Issue 3 - Summer Year 2022]
  • Sivakumar.S Advanced operations research techniques for multi-constraint QoS routing in internet [ Vol.3, Issue 4 - Autumn Year 2007]
  • sobhani.Zahra An availability-based design optimization by using a fuzzy goal programming approach [ Vol.19, Issue 4 - Autumn Year 2023]
  • Sofiana.Amanda Product quality improvement model considering quality investment in rework policies and supply chain profit sharing [ Vol.15, Issue 4 - Autumn Year 2019]
  • Soleimani.Behzad Designing an Algorithmic Trading System, Based on Deep Learning (Case Study: Tehran Stock Exchange) [ Vol.19, Issue 4 - Autumn Year 2023]
  • Soleimani.Paria Performance of Cluster-Based Logistic Profile Monitoring Under Existence of Different Linkage Functions [ Vol.19, Issue 3 - Summer Year 2023]
  • Soleimani.Paria Designing an Algorithmic Trading System, Based on Deep Learning (Case Study: Tehran Stock Exchange) [ Vol.19, Issue 4 - Autumn Year 2023]
  • Soleimani.Parya Robust Cluster-Based method for monitoring generalized linear profiles in phase I [ Vol.17, Issue 1 - Winter Year 2021]
  • soltani.roya Assessing the reliability of dynamic systems for safety units recovering flare gas, considering covariates [ Vol.18, Issue 4 - Autumn Year 2022]
  • Soltani.Shahriar Examining the impact of customer satisfaction with after-sales service on corporate profitability [ Vol.18, Issue 1 - Winter Year 2022]
  • Sufi.Nasir Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • Sufi.Nasir Reliability Availability Maintainability Dependability Analysis of Mirrored Distributed System [ Vol.18, Issue 2 - Spring Year 2022]

T

  • Taati.Erfan Designing an Algorithmic Trading System, Based on Deep Learning (Case Study: Tehran Stock Exchange) [ Vol.19, Issue 4 - Autumn Year 2023]
  • taghizadeh.houshang The investigation of supply chain's reliability measure: a case study [ Vol.8, Issue 1 - Winter Year 2012]
  • taleizadeh.ata allah Economic order quantity with partial backordering and sampling inspection [ Vol.13, Issue 3 - Summer Year 2017]
  • taleizadeh.ata allah Optimizing pricing and ordering strategies in a three-level supply chain under return policy [ Vol.16, Issue 1 - Winter Year 2020]
  • taleizadeh.ata allah Pricing in a two-echelon supply chain with different market powers: game theory approaches [ Vol.12, Issue 1 - Winter Year 2016]
  • taleizadeh.ata allah Optimal advertising and pricing decisions for complementary products [ Vol.11, Issue 1 - Winter Year 2015]
  • Tarokh.Mohammad Jafar Technical Note: Performance measurement in industrial organizations, case study: Zarbal Complex [ Vol.2, Issue 3 - Summer Year 2006]
  • Tavakkoli-Moghaddam.Reza A hybrid meta-heuristic algorithm for the vehicle routing problem with stochastic travel times considering the driver's satisfaction [ Vol.8, Issue 1 - Winter Year 2012]
  • Tavakkoli-Moghaddam.Reza An archived multi-objective simulated annealing for a dynamic cellular manufacturing system [ Vol.10, Issue 2 - Spring Year 2014]
  • Tavakkoli-Moghaddam.Reza Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory [ Vol.11, Issue 4 - Autumn Year 2015]
  • Tavakkoli-Moghaddam.Reza Incorporating location, routing, and inventory decisions in a bi-objective supply chain design problem with risk-pooling [ Vol.9, Issue 1 - Winter Year 2013]
  • Tavakkoli-Moghaddam.Reza Minimizing the total tardiness and makespan in an open shop scheduling problem with sequence-dependent setup times [ Vol.8, Issue 1 - Winter Year 2012]
  • Tavakkoli-Moghaddam.Reza Optimizing a sustainable inventory-routing problem in tomato agri-chain considering postharvest biological behavior [ Vol.17, Issue 2 - Spring Year 2021]
  • Tavakkoli-Moghaddam.Reza A three-stage assembly flow shop scheduling problem with blocking and sequence-dependent set up times [ Vol.8, Issue 1 - Winter Year 2012]
  • Tavakkoli-Moghaddam.Reza A multi-objective model for designing a group layout of a dynamic cellular manufacturing system [ Vol.9, Issue 1 - Winter Year 2013]
  • Tavakkoli-Moghaddam.Reza Solving an one-dimensional cutting stock problem by simulated annealing and tabu search [ Vol.8, Issue 1 - Winter Year 2012]
  • Tavana.Madjid Data envelopment analysis in service quality evaluation: an empirical study [ Vol.11, Issue 3 - Summer Year 2015]
  • Tavana.Madjid A novel three-stage distance-based consensus ranking method [ Vol.16, Issue 1 - Winter Year 2020]
  • Tavana.Madjid The impact of interwoven integration practices on supply chain value addition and firm performance [ Vol.15, Issue 1 - Winter Year 2019]
  • Tilahun.Shimelis Examining significant factors in micro and small enterprises performance: case study in Amhara region, Ethiopia [ Vol.14, Issue 2 - Spring Year 2018]
  • Tohidi.Ghasem Allocation models for DMUs with negative data [ Vol.9, Issue 1 - Winter Year 2013]
  • Tohidi.Ghasem An L1-norm method for generating all of efficient solutions of multi-objective integer linear programming problem [ Vol.8, Issue 1 - Winter Year 2012]
  • tohidi.hamid Information sharing systems and teamwork between sub-teams: a mathematical modeling perspective [ Vol.13, Issue 4 - Autumn Year 2017]
  • Toma.Eiji Analysis of motor fan radiated sound and vibration waveform by automatic pattern recognition technique using “Mahalanobis distance” [ Vol.16, Issue 1 - Winter Year 2020]

U

  • Umar.Abdulkareem Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • Umar.Abdulkareem Reliability and Cost Analysis of Sachet Water Plant Using Copula Approach [ Vol.18, Issue 1 - Winter Year 2022]
  • Umar.Abdulkareem Performance Assessment of a Serial System with Human Operators Attended by Repair Machines [ Vol.19, Issue 1 - Winter Year 2023]

V

  • Vahedi Geshniani.Yaser Development of Clustering Technique and Genetic Algorithm to Monitor Multivariate Descriptive Processes based on Large-scale Nominal Contingency Tables (Case Study: Renewable Energy Process ) [ Vol.18, Issue 2 - Spring Year 2022]
  • Varmazyar.Mohsen Classification and properties of acyclic discrete phase-type distributions based on geometric and shifted geometric distributions [ Vol.15, Issue 4 - Autumn Year 2019]

W

  • Wu.Jinbiao Measures of Repairable Series-Parallel Computer Network with Fault Tolerant Device via Copula [ Vol.19, Issue 3 - Summer Year 2023]

Y

  • Yazdani.Mehdi An electromagnetism-like metaheuristic for open-shop problems with no buffer [ Vol.8, Issue 1 - Winter Year 2012]
  • Yi.Sun Neurological Measurement of Human Trust in Automation Using Electroencephalogram [ Vol.18, Issue 3 - Summer Year 2022]
  • Yousefi Zenouz.Reza Developing two 4-parameter and 5-parameter exponential smoothing methods with multiplicative trend for demand forecasting [ Vol.17, Issue 3 - Summer Year 2021]
  • Yousefi.Samuel A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy [ Vol.13, Issue 2 - Spring Year 2017]
  • Yousefikhoshbakht.Majid Solving the vehicle routing problem by a hybrid meta-heuristic algorithm [ Vol.8, Issue 1 - Winter Year 2012]
  • Yusuf.Bashir Analysis of Mean Time to System Failure and Availability of a System with Cold Standby Unit [ Vol.18, Issue 1 - Winter Year 2022]
  • Yusuf.Ibrahim Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution [ Vol.17, Issue 3 - Summer Year 2021]
  • Yusuf.Ibrahim Comparative analysis of profit between three dissimilar repairable redundant systems using supporting external device for operation [ Vol.10, Issue 4 - Autumn Year 2014]
  • Yusuf.Ibrahim Comparison between four dissimilar solar panel configurations [ Vol.13, Issue 4 - Autumn Year 2017]
  • Yusuf.Ibrahim Measures of Repairable Series-Parallel Computer Network with Fault Tolerant Device via Copula [ Vol.19, Issue 3 - Summer Year 2023]
  • Yusuf.Ibrahim Reliability Availability Maintainability Dependability Analysis of Mirrored Distributed System [ Vol.18, Issue 2 - Spring Year 2022]
  • Yusuf.Ibrahim Performance Assessment of a Serial System with Human Operators Attended by Repair Machines [ Vol.19, Issue 1 - Winter Year 2023]
  • Yusuf.Ibrahim Copula Approach for Reliability and Performance Estimation of Manufacturing System [ Vol.18, Issue 2 - Spring Year 2022]

Z

  • zameni.saeed Sustainable p-hub Median Modeling for Perishable items in presence of Fuzzy Setting [ Vol.19, Issue 3 - Summer Year 2023]
  • Zanjani Foumani.Zahra A Facility Location Problem in a Green Closed-Loop Supply Chain Network Design by Considering Defective Products [ Vol.18, Issue 1 - Winter Year 2022]
  • Zarei.Azim Dynamics of the Digital Banking Ecosystem in Iran [ Vol.19, Issue 4 - Autumn Year 2023]
  • ZEGHDANI.salima A probabilistic hybrid methodology for the management and control of risks related to the production system: Case of industrial textiles [ Vol.19, Issue 1 - Winter Year 2023]
  • Zeng.W Correlation coefficient of intuitionistic fuzzy sets [ Vol.3, Issue 5 - Autumn Year 2007]
  • Zenouz.Reza Analysis of the performance of different classifiers in solving the credit risk scoring problem with noisy and clean data [ Vol.18, Issue 3 - Summer Year 2022]
  • Zenouz.Reza Determining the level of automation in the cosmetics industry considering new technology [ Vol.18, Issue 2 - Spring Year 2022]
  • Zhong.Wan Performance Assessment of a Serial System with Human Operators Attended by Repair Machines [ Vol.19, Issue 1 - Winter Year 2023]
  • Ziari.Shokrollah Ranking efficient DMUs using minimizing distance in DEA [ Vol.12, Issue 2 - Spring Year 2016]
  • Ziari.Shokrollah Completion of the paper “Ranking Efficient DMUs based on single virtual inefficient DMU in DEA” [ Vol.19, Issue 3 - Summer Year 2023]
  • Zidan.Eveline EPQ model with inspection of batches and disposal of defective items [ Vol.17, Issue 2 - Spring Year 2021]
  • zoraghi.nima A fuzzy MCDM model with objective and subjective weights for evaluating service quality in hotel industries [ Vol.9, Issue 1 - Winter Year 2013]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2025

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]