A decisive constraint for the long-term stability of the artificial joint is to minimize the release of debris particles. The wear/debris induced osteolysis and aseptic loosening are the result of failure of metal-on-metal joint implants. SPD processes have been used to More
A decisive constraint for the long-term stability of the artificial joint is to minimize the release of debris particles. The wear/debris induced osteolysis and aseptic loosening are the result of failure of metal-on-metal joint implants. SPD processes have been used to adapt the surface integrity properties by generating ultrafine or even nano-sized grains and grain size gradients in the surface region of work materials. These fine grained materials often show enhanced surface integrity properties and improved functional performance (wear resistance, corrosion resistance, fatigue life, etc.) compared with their predictable coarse grained counterparts. To identify the implant material’s post machined behaviour in biological environment, the experiments were planned by precision CNC turning process and accordingly post machined surfaces were analyzed by contact type and electrochemical measurement processes. The work includes effect of machining parameters on machined surface roughness and corrosion rate by an electrochemistry of Co-Cr-Mo bio-implant alloy. The minimum machined surface roughness value 0.450 µm shows minimum corrosion rate as 0.00002 mm/year. It is also shown that feed rate is having predominating effect on machined surface roughness and rake angle is on corrosion rate of Co-Cr-Mo bio-implant alloy.
Manuscript profile
Manufacturing of an optical lenses demand a specialized technology and thus needs sophisticated precision manufacturing process. PMMA is one of the most used optical polymer for manufacturing of optical lenses, the shaping of which into the required precision and accura More
Manufacturing of an optical lenses demand a specialized technology and thus needs sophisticated precision manufacturing process. PMMA is one of the most used optical polymer for manufacturing of optical lenses, the shaping of which into the required precision and accuracy is a challenging task. The focus of the present paper is to understand the effect of machining parameters on the surface characteristics especially flatness obtained in single point diamond turning (SPDT). The experiments were conducted according to Taguchi L9 design. The machining parameters chosen are feed rate, spindle speed, depth of cut and cutting environment. Analysis of results reveals that the spindle speed is more influential on the surface flatness generated by the SPDT. All the flatness measurements were done by the non contact type of measurement. It is observed that the minimum PV value produced is 0.837 µm.
Manuscript profile
