Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
محورهای موضوعی : Automation and robotics in manufacturing
Mohammad Esmaeili
1
(
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
)
Mohammad Saadat
2
(
Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
)
کلید واژه: Industrial Robot, Electric Arc Furnace, Dynamic Model, Robot Manipulator, Direct Kinematics, Inverse Kinematics,
چکیده مقاله :
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is essential to open the tap hole with Automated/robotic oxygen lancing. This study was aimed to design a robot manipulator with five degrees of freedom and revolute joints for opening the tap hole of an electrical arc furnace. The geometrical model of the robot was designed in Solid works software according to real work place and its expected path and obstacles. Direct and reverse kinematic equations were obtained using link parameters (Denawit–Hartenberg) and link transforms. The Newton-Euler approach was employed to derive the dynamic equations and the resultant joint torques.
[1] Labar, H., Djeghader, Y., Samira, K. M. and Kamel, B. 2009. Closely parametrical model for an electrical arc furnace. World Academy of Science. Engineering and Technology. 40: 96-100.
[2] Seetharaman, S., Mclean, A. and Goodwill, J. E. 2014. Treatise on process metallurgy: industrial processes. Royal Institute of Technology. Stockholm, Sweden.
[3] Moberg, S. 2010. Modeling and control of flexible manipulators. Ph.D. Thesis. Department of Electrical Engineering Linköping University, SE–581 83 Linköping, Sweden.
[4] Høifødt, H. 2011. Dynamic modeling and simulation of robot manipulators. MSc Thesis, Department of Engineering Cybernetics. Norwegian University of Science and Technology.
[5] Tenova. 2015. Melt shops top charge EAF with a anthropomorphic temperature and sampling Robot. URL: https://www.youtube.com/watch?v=7Yr5qYZUpso.
[6] Danieli, Q-Robot Melt Anthropomorphic robot for temperature sampling and steel Analysis in EAF’s. URL:https://www.dca.it/media/download/brochure-q-robot-melt.pdf.
[7] Kucuk, S. and Bingul, A. 2005. The inverse kinematics solutions of fundamental robot manipulators with offset wrist. Proceeding of the IEEE ICM/HIMA. Taiwan, 197-202.
