List of Articles Aluminum

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Effect of materials with diverse properties on hardness value increased by Equal Channel Angular pressing process
  Farshid Ahmadi محمد حسین شهسواری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
  20.1001.1.27170314.2020.9.4.6.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process
  Shahin Heidari Ahmad Afsari
  20.1001.1.27170314.2021.10.1.1.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Investigation of the Effect of Different Forming Pressure Curves on Formability of AA1050 Tubes in Warm Hydroforming Process
  Seyed Jalal Hashemi
  20.1001.1.27170314.2021.10.1.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
  Qadarat Mohammad Jassim Al-Issawii Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
  10.71762/mpmp.2023.996847
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Raman Analysis of DLC Nanostructure Coating on AL 6061-T6 Made by DC Pulsed- PACVD
  Seyed Mohammad Mahdi Shafiei Hamed Raeiesifard
  20.1001.1.27170314.2022.11.3.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Investigation of the Impact of the Alumina Powder Presence in Dielectric on Electrical Discharge Machining Parameters of A413 Aluminum Workpiece using Taguchi's Experiment Design, Signal-to-noise Analysis, and Total Normalized Quality Loss
  Mojtaba Shahbazi Dastjerdi Ali Mokhtarian Mojtaba Rahimi
  20.1001.1.27170314.2023.12.1.6.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Evaluation of the Cryogenic Effect on Friction Stir Processed AA7075/Si Matrix Nanocomposites
  Navid Molla Ramezani Behnam Davoodi
  10.71762/mpmp.2024.996927
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
  Ahmad Reza Sabet Hamid Montazerolghaem
  20.1001.1.27170314.2018.7.1.2.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
  Mehdi Zohour Bahman Ghorbani
  20.1001.1.27170314.2013.2.4.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method
  Mohammad Heydari Vini Pedram Farhadipour
  20.1001.1.27170314.2016.5.4.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Analytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints
  Mehdi Zohoor Bahman Ghorbani
  20.1001.1.27170314.2014.3.1.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys
  Seyed Ali Niknam Keyhan Jabbari
  20.1001.1.27170314.2018.7.1.4.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
  Amin Rabiezadeh Ahmad Afsari
  20.1001.1.27170314.2016.5.3.4.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
  Mohammad Hossein Shahsavari Farshid Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Comparison of Hardness Values of Various specimens with different geometries and material properties after ECAP
  Mohammad Hossein Shahsavari Farshid Ahmadi
  20.1001.1.27170314.2014.3.3.5.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754
  Javad Shahbazi Karami Hamed Bakhtiarizade Mohsen Shahmoradi
  20.1001.1.27170314.2016.5.2.7.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
  Saleh Al Khatour Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
  10.71762/mpmp.2024.1056130
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Investigating the Effect of T6 Heat Treatment on Mechanical Properties of 7075 Al Alloy
  Mohsen Emami Vahid Hasan Nasab
  10.71762/mpmp.2024.1105961
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Comparison and Analysis of the Effect of Tools with Pins of Different Cross-Sections in the Friction-Stir Welding Method
  Aala Hadi Bejai  Almayali Ahmad Afsari Seyed Mohammad Reza Nazemosadat Mohammad Marzban
  10.71762/g8we-ef39
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Effects of Friction Stir Processing on Mechanical Properties of AA7075 Aluminum Alloy after Joining by Gas Tungsten Arc Welding
  Hamed Fotouhi Sayed Ahmad Behgozin Ahmad Afsari
  10.71762/ahk2-x486