List of Articles ANN

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Effect of materials with diverse properties on hardness value increased by Equal Channel Angular pressing process
  Farshid Ahmadi محمد حسین شهسواری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace
  Mohammad Esmaili Mohammad Saadat
  20.1001.1.27170314.2020.9.4.1.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions
  Maryam Bahrami Mehdi Khashei Atefeh Amindoust
  20.1001.1.27170314.2021.10.2.2.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Optimal Trajectory Planning for an Industrial Mobile Robot using Optimal Control Theory
  Pouya Mallahi Kolahi Masoud Mosayebi
  20.1001.1.27170314.2021.10.3.4.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
  Farshid Ahmadi Hadi Mansouri Elyas Sarami Foroushani
  20.1001.1.27170314.2022.11.3.1.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Analysis of Orthotic Insoles Manufacturing for Treating Flatfoot Using Smart Orthotic Insole in Comparison with Traditional Methods
  Behzad Karimkhani Sayed Hasan Mirtalaie
  20.1001.1.27170314.2023.12.3.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process
  Mohammad Honarpisheh Ali Akbar Haddadi Hadi Mansouri
  20.1001.1.27170314.2019.8.2.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Desiging, Part Selecting and Fabrication Procedure of the Vaccum Section of a Leaf Vacuum Shredder Machine
  Alireza Shirneshan Mohammad Ali Ghazavi Mehrdad Poursina
  20.1001.1.27170314.2013.2.2.4.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
  Masoud Azimi Amin Kolahdooz Seyyed Ali Eftekhari
  20.1001.1.27170314.2017.6.1.4.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research
  Ankit Sahai Shanti S. Sharma Suren N. Dwivedi
  20.1001.1.27170314.2021.10.3.5.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics
  Saeed Taouji Hassanpour Reza Bashirzadeh Abolfazl Adressi Behnam Bahmankhah
  20.1001.1.27170314.2014.3.4.4.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
  Mohammad Hossein Shahsavari Farshid Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - An Improved Analytical Model for Prediction of Residual Deformation in Longitudinal Scheme of Laser Tube Forming Process
  Hossein Ebrahimi Zohrhe Ebrahimi
  10.71762/5m06-ps04
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Construction and Assessment of Brass (CuZn30)/Low carbon Steel/Brass /Brass (CuZn30) thin Film Metal Composite in Wear Resistance, Microstructural and Mechanical Properties, Incorporating Consideration of the Impact of Annealing Temperature
  Seyed Mostafa  Mirtabaei Farid  Bagherpoor
  10.71762/v2b1-6z84