Influence of Some Hydrocolloids on Textural Properties of UF Cheese

Subject Areas : food microbiology

Sh Zomorodi ¹ , E. Azarpazhooh ² , H. Behmadi ³

1 - Associate Professor, Agricultural Engineering Research Department, West Azarbaijan Agricultural and Natural Resources Research and Education Center, AREEO, Urmia, Iran.
2 - Assistant Professor, Agricultural Engineering Research Department, Khorasan Razavi Agricultural and Natural Resources Research and Education Center, AREEO, Mashhad, Iran.
3 - Assistant Professor Agricultural Engineering Research Institute, AREEO, Karaj, Iran.

Received: 2020-05-13 Accepted : 2020-05-13 Published : 2020-07-01

Keywords:

References:

Aminifar, M. & Emam-Djomeh, Z. (2016). Investigation on the microstructural and textural properties of lighvan cheese produced from bovine milk fortified with protein and gum tragacanth during ripening. International Journal of Dairy Technology, 69(2), 225-235.
Aminifar, M., Hamedi, M., Emam-Djomeh, Z. & Mehdinia, A. (2013). The effect of ovine and bovine milk on the textural properties of lighvan cheese during ripening. International Journal of Dairy Technology, 66(1), 45-53.
Anroop, B., Ghosh, B., Parcha, V. & Vasanti, S. (2006). Studies on Ocimum gratissimum seed mucilage: evaluation of binding properties. International Journal Pharmacy, 325, 191-203.
Azoma, J. & Sakamoto, M. (2003). Cellulosic hydrocolloid system presents in seed of plants. Trends in Glycoscience and Glycotechnology, 15, 1–14.
Bryant, A., Ustanol, Z. & Stefe, J. (1995). Texture of Cheddar cheese as influenced by fat reduction. Journal of Food Science, 60, 1216-1219.
Cerqueira, M., Lima, A. M., Souza,B. W. S., Teixeira, J. A., Moreira, R. & Vicente, A. (2009). Functional polysaccharides as edible coatings for cheese. Journal of Agricultural and Food Chemistry, 57(4), 1456-62.
Cooke, D. R., Khosrowshahi, A. & McSweeney, P. L. H. (2013). Effect of gum tragacanth on the rheological and functional properties of full-fat and half-fat cheddar cheese. Dairy Science and Technology, 93, 45-62.
Dimitreli, G. & Thomareis, A. S. (2008). Effect of chemical composition on the linear viscoelastic properties of spreadable-type processed cheese. Journal of Food Engineering, 84(3), 368-374. http://dx.doi.org/10.1016/j.jfoodeng. 2007.05.030
Drake, M. A. & Swanson, M. G. (1995). Reduced and low-fat-cheese technology: A review. Trends of Food Science and Technology, 6, 366–369.

Erdem, Y. K. (2000). Influence of ultrafiltration on modification of surface hydrophobic sites of milk protein system in the course of renneting. Journal of Food Engineering, 44, 63–70.
Fedeniuk, R. W. & Biliaderis, C. G. (1994). Composition and physicochemical properties of linseed (linum usitatissimum L.) mucilage. Journal Agriculture Food Chemistry, 42, 240–247.
Fox, P. F., Guinee, T. P., Cogan, M. T. & McSweeney, P. L. H. (2000). Fundamentals of cheese science, Aspen publication.
Garcıa-Ochoa, F., Santos, V. E., Casas, J. A. & Gomez, E. (2000). Xanthan gum: production, recovery, and properties. Biotechnology Advances, 18(7), 549-579.
Hanakova, Z., Bunka, F., Pavlínek, V., Hudeckova, L. & Janis, R. (2013). The effect of selected hydrocolloids on the rheological properties of processed cheese analogues made with vegetable fats during the cooling phase. International Journal of Dairy Technology, 66, 484-489. http://dx.doi.org/10.1111/1471-0307.12066.
Hennelly, P. J., Dunne, P. G., O'Sullivan, M. & O'Riordan, E. D. (2006). Textural, rheological and microstructural properties of imitation cheese containing inulin. Journal of Food Engineering, 75(3), 388-395. http://dx.doi.org/10.1016/j. jfoodeng.2005.04.023.
Hort, J., Grys, G. & Woodman, J. (1997). The relationships between the chemical, rheological and textural properties of Cheddar cheese. Lait, 77, 587-600.
Hosseini-Parvar, S. H., Matia-Merino, L. & Golding, M. (2015). Effect of basil seed gum (BSG) on textural, rheological and microstructural properties of model processed cheese. Food Hydrocolloids, 43, 557-567
Hosseini-Parvar, S.H., Mortazavi, S.A., Razavi, S.M.A., Matia-Merino, L. & Goh, K.K.T. (2010). Steady shear flow behavior of gum extracted from basil seed (Ocimum basilicum L.): Effect of concentration and temperature. Journal of Food Engineering, 101, 236-243.
Johary, N., Fahimdanesh, M. & Garavand, F. (2015). Effect of basil seed gum and tracaganth gum as fat replacers on physicochemical, antioxidant and sensory properties of low fat mayonnaise. www.ijesi.org. 4 (1), 51-57.
Karami, M., Ehsani, M.R., Mousavi, S.M., Rezaei, K. & Safari, M. (2009). Microstructural properties of fat during the accelerated ripening of Ultrafiltered-Feta cheese. Food Chemistry, 113, 424-434.
Koca, N. & Metin, M. (2004). Textural, melting and sensory properties of low-fat fresh kashar cheeses produced by using fat replacers. International Dairy Journal, 4, 365-373.
Konuklar, G., Inglett, G. E., Warner, K. & Carriere, C. J. (2004). Use of a β-glucan hydrocolloidal suspension in the manufacture of low-fat Cheddar cheeses: textural properties by instrumental methods and sensory panels. Food Hydrocolloids, 18, 535-545.
Korish, M. & Abd Elhamid, A. M. (2012). Improving the textural properties of Egyptian kariesh cheese by addition of hydrocolloids. International Journal of Dairy Technology, 65, 237–242.
Low, D., Ahlgren, J. A., Horne, D., McMahon, D. J., Oberg, C. J. & Broadbent, J. R. (1998). Role of Streptococcus thermophilus MR- 1C capsular exopolysaccharide in cheese moisture retention. Applied Environmental Microbiology, 64, 2147–2151.
Luyten, H., Van Vliet T. & Walstra P. (1991). Characterization of the consistency of Gouda cheese: Rheological properties. Netherlands Milk Dairy Journal, 45, 33–53.
McEwan, J. A., Moore, J. D. & Colwill, J. S. (1989). The sensory characteristics of Cheddar cheese and their relationship with acceptability. Journal of the Society of Dairy Technology, 42, 112–117.
McMahon, D. J., Fife, R. L. & Oberg, C. J. (1999). Water partitioning in Mozzarella cheese and its relationship to cheese meltability. Journal Dairy Science, 82, 1361–1369.
Messens, W., Estepar-Garcia, J., Dewettinck, K. & Huyghebaert, A. (1999). Proteolysis of high-pressure-treated Gouda cheese. International Dairy Journal, 9, 775–782.
Mistry, V. V. (2001). Low fat cheese technology. International Dairy Journal, 11, 413-422.
Nolan, E., Holsinger, V. & Shieh, J. (1989). Dynamic rheological properties of natural and

imitation Mozzarella cheese. Journal of Texture Studies, 20, 179-189.
Pandey, A., Soccol, C. R. & Mitchell, D. (2000). New Developments in Solid State Fermentation: Bioprocesses and Products. Process Biochemistry, 35, 1153-1169.
Romeih, E. A., Michaelidou, A., Biliaderis, C. G. & Zerfiridis, G. K. (2002). Low-fat white-brined cheese made from bovine milk and two commercial fat mimetics: chemical, physical and sensory attributes. International Dairy Journal, 12, 525–540.
Sipahioglu, O., Alvarez, V. B. & Solano-Lopez, C. (1999). Structure, physicochemical and sensory properties of Feta cheese made with Tapioca starch and lecithin as fat mimetics. International Dairy Journal, 9, 783–789.
Souza, C. H. B. & Saad, S. M. I. (2009). Viability of Lactobacillus acidophilus La-5 added solely or in co-culture with a yoghurt starter culture and implications on physico-chemical and related properties of Minas fresh cheese during storage. Lebensmittel-Wissenschaft [i.e. und] Technology, 42, 633–640.
Steffe, J. F. (1996). Rheological methods in food process engineering, second edition. Freeman Press, East Lansing, MI. pp. 358–360 (33).
Subramanian, R., Muthukumarappan, K. & Gunasekaran, S. (2006). Linear viscoelastic properties of regular- and reduced-fat pasteurized process cheese during heating and cooling. International Journal of Food Properties, 9, 377–393.
Tabibloghmany, F., Hojjatoleslamy, M., Farhadian, F. & Ehsandoost, E. (2013). Effect of Linseed (Linum usitatissimum L.) hydrocolloid as edible coating on decreasing oil absorption in potato chips during Deep-fat frying. International Journal of Agriculture Crop Science, 6, 63–69.
Tunick, M. H. (2000). Rheology of dairy foods that gel, stretch, and fracture. Journal of Dairy Science, 83, 1892–1898.
Wang, J. & Li, L. (2012). Comparative study of chemical composition and texture profile analysis between camembert cheese and chinese Sufu. Biotechnology Frontier, 1 (1), 1‐8.
Weiserová, E., Doudová, L., Galiová, L., Žák, L., Michálek, J., Janiš, R. & Buňka, F. (2011). The effect of combinations of sodium phosphates in binary mixtures on selected texture parameters of processed cheese spreads. International Dairy Journal, 21, 979- 986.
Wium, H., Gross, M. & Qvist, K. B. (1997). Uniaxial compression of UF-Feta cheese related to sensory texture analysis. Journal of Texture Studies, 28, 455–476.
Yilmaz, M. T. Y., Karaman, S., Cankurt, H., Kayacier, A. & Sagdic, O. (2011). Steady and dynamic oscillatory shear rheological properties of ketchup processed cheese mixtures: Effect of temperature and concentration. Journal of Food Engineering, 103, 197–210.
Yokoyama, A. K., Srinivasan, R. & Fogler, H. S. (1988). Stabilization mechanism colloidal suspensions by gum tragacanth: The influence of pH on stability. Journal of Colloid and Interface Science, 1, 141- 149.
Zhu, C. (2013). Characterisation of the rheological properties of mozzarella cheese. Thesis presented in partial fulfilment of the requirements for the degree of master of engineering in Chemical and Bioprocess Engineering, Massey University, Manawatu, New Zealand.
Zisu, B. & Shah, N. P. (2005). Textural and functional changes in low-fat Mozzarella cheeses in relation to proteolysis and microstructure as influenced by the use of fat replacers, pre-acidification and EPS starter. International Dairy Journal, 15, 957-972.
Zomorodi, Sh., Khosrowshahi Asl, A., Razavi Rohani, S. M. & Miraghaei, S. (2011). Survival of Lactobacillus casei, Lactobacillus plantarum and Bifidobacterium bifidumin free and microencapsulated forms on Iranian white cheese produced by ultrafiltration. International Journal of Dairy Technology, 64(1), 84-91.