تبیین تاثیر طراحی ساختمان بر کاهش انرژی نهفته در موقعیت جغرافیایی و اقلیمی بندرعباس
محورهای موضوعی : کالبدیآذر زینلی خراجی 1 , نیلوفر نیک قدم 2 , سید مجید مفیدی شمیرانی 3
1 - گروه معماری ، واحد بین الملل کیش ،دانشگاه آزاد اسلامی ، کیش، ایران.
2 - گروه معماری، دانشکده هنر و معماری، واحد تهران جنوب ،دانشگاه آزاد اسلامی ، تهران، ایران
3 - استادیارگروه معماری، دانشکده، علرم وصنعت ایران، تهران، ایران.
کلید واژه: مصالح ساختمانی, انرژی نهفته, راهکارهای معماری, اقلیم بندرعباس, طراحی معماری,
چکیده مقاله :
ساختمان‌های مسکونی مسئول بخش قابل توجهی از مصرف انرژی در سراسر جهان هستند. ساخت هر مصالح و کاربرد آن در اجرای ساختمان انرژی مصرف می‌کند. این انرژی مصرف شده همان انرژی نهفته است که در کشور ما کمتر به آن پرداخته می‌شود. هدف این تحقیق کاهش مصرف انرژی نهان در ساختمان در راستای حفظ محیط زیست وتغییرات اقلیمی می باشد. در این مقاله با استناد به پیشینه تحقیق به کاهش انرژی نهفته با راهکارهای طراحی معماری پرداخته خواهد شد. ابتدا با توجه به مبانی نظری تحقیق متغیرهای مستقل تاثیر گذار تبیین می شوند. سپس انرژی نهفته یک ساختمان دراقلیم گرم ومرطوب شهر بندر عباس پس از مدل سازی مولفه های تاثیر گذار در قالب متغیرهای مستقل، متناسب با نوع ساختمان وخروجی های مقدار مصالح در نرم افزار اکسل محاسبه می‌گردد. نتایج در این مقاله شامل دو بخش نتایج نظری که محصول بررسی متون است و نتایج تجربی که از محاسبات حاصل شده و تحلیل گردیده است. دستاوردهای این پژوهش نشان می‌دهد که انرژی نهفته هر متر مربع ساختمان نمونه در موقعیت جغرافیایی و اقلیمی بندرعباس در بخش معماری 1.9 مگا ژول در هر متر مربع است که با تغییر متغیرهای طراحی تا 18.5 مگا ژول در هر متر مربع قابل تغییر می‌باشد؛ همچنین بیشترین درصد انرژی نهفته مربوط به دیوارها و کف‌ها است. نتایج این تحقیق الزام محاسبات و توجه به راهکارهای کاهش انرژی نهفته را در اقلیم گرم و مرطوب (بندرعباس) که نیاز به مصرف انرژی بیشتر دارند را برای دست اندرکاران ساختمان تاکید می‌کند .
|
1) Abdagiri, P. V. (2017). Relationship Between Embodied Energy and Cost of Building Materials: A Case Study (Doctoral dissertation).51 |
|
2) Akrami, & Alipour. (2017). The role of indigenous materials in sustainable architecture from an environmental perspective. Housing and the environment of the village, 35 (156), 29-48. )In Persian( |
|
3) Aktas, C. B., & Bilec, M. M. (2012). Impact of lifetime on US residential building LCA results. The International Journal of Life Cycle Assessment, 17(3), 337-349. |
|
4) Ali Soltani Lorgani, A Reflection of the Energy Behavior in the Process of Sustainable Design of Zero-End Energy Buildings... )In Persian( |
|
5) Amini Tusi Hashem, (95) Guidelines for evaluating the life cycle of a building in the process of architectural design, dissertation for a master's degree, University of Tehran, Faculty of Fine Arts, Faculty of Architecture, )In Persian( |
|
6) Atkinson, C., Hobbs, S., West, J., and Edwards, S., 1996. ‗Life cycle embodied energy and carbon dioxide emissions in buildings. 'UNEP Construction Industry & Environment 19(2): 29-31. |
|
7) Azari, Rahman, and Narjes Abbasabadi. (2018)"Embodied energy of buildings: A review of data, methods, challenges, and research trends." Energy and Buildings 168: 225-235. |
|
8) Bardhan, S. (2011). Embodied energy analysis of multi storied residential buildings in urban India. WIT Transactions on Ecology and the Environment, 143, 411-421 |
|
9) Cabeza, L. F., Barreneche, C., Miro, L., Martínez, M., Fernández, A. I., & Urge-Vorsatz, D. (2013). Affordable construction towards sustainable buildings: review on embodied energy in building materials. Current Opinion in Environmental Sustainability, 5(2), 229-236. |
|
10) Cabeza, L. F., Barreneche, C., Miró, L., Morera, J. M., Bartolí, E., & Fernández, A. I. (2013). Low carbon and low embodied energy materials in buildings: A review. Renewable and Sustainable Energy Reviews, 23, 536-542. |
|
11) Crawford, R. H., & Stephan, A. (2013, January). The significance of embodied energy in certified passive houses. In Proceedings of World Academy of Science, Engineering and Technology (No. 78, p. 453). World Academy of Science, Engineering and Technology (WASET). |
|
12) Crawford, R. H., Czerniakowski, I., & Fuller, R. J. (2010). A comprehensive framework for assessing the life-cycle energy of building construction assemblies. Architectural science review, 53(3), 288-296 |
|
13) Crowther, P., 1999. ،Design for disassembly to recover embodied energy. 'In the 16th annual conference on passive and low energy architecture, , Melbourne-Brisbane-Cairns, September, 1999, |
|
14) Ding, G., 2004. The development of a multi-criteria approach for the measurement of sustainable performance for built projects and facilities. PhD Thesis, University of technology, Sydney. |
|
15) Dixit, M. K., Culp, C. H., Lavy, S., & Fernandez-Solis, J. (2014). Recurrent embodied energy and its relationship with service life and life cycle energy: a review paper. Facilities, 32(3-4), 160-181. |
|
16) Dixit, M. K., Fernández-Solís, J. L., Lavy, S., & Culp, C. H. (2010). Identification of parameters for embodied energy measurement: A literature review. Energy and buildings, 42(8), 1238-1247 |
|
17) Energy Balance Sheet in 2006, Section 9. )In Persian( |
|
18) Ezema, I. C., Olotuah, A. O., & Fagbenle, O. I. (2015). Estimating embodied energy in residential buildings in a Nigerian context. International Journal of Applied Engineering Research, 10(24), 44140-44149 |
|
19) Forouzan, Narjes, Hajipour, Khalil, & Soltani. (2016). Investigation of energy consumption hidden in residential tissues Case study: Shiraz city. The Role of the World, 6 (1), 42-52. )In Persian( |
|
20) Golzadeh, Pouya, Ramezanianpour, Amir Mohammad, 2015, Investigation of the role of building walls in energy consumption and carbon dioxide emission using life cycle assessment method, 3rd International Congress of Civil Engineering, Architecture and Urban Development, Tehran, Permanent Secretariat Shahid Beheshti University International Congress of Civil Engineering, Architecture and Urban Development)In Persian( |
|
21) Hammond, G., Jones, C., Lowrie, E. F., & Tse, P. (2011). Embodied carbon. The inventory of carbon and energy (ICE). |
|
22) Hammond, G., Jones, C., Lowrie, F., & Tse, P. (2008). Inventory of carbon & energy: ICE (Vol. 5). Bath: Sustainable Energy Research Team, Department of Mechanical Engineering, University of Bath |
|
23) Haynes, R. (2010). Embodied energy calculations within life cycle analysis of residential buildings. Etet1812. Staging-Cloud. Netregistry, 1-16. |
|
24) https://www.victoria.ac.nz/architecture/centres/.../ee-coefficients.pdf |
|
25) Huberman, N., & Pearlmutter, D. (2008). A life-cycle energy analysis of building materials in the Negev desert. Energy and Buildings, 40(5), 837-848. |
|
26) Karim Pourali Reza, The Impact of Architectural Design Components on Energy Consumption in Residential Buildings Using Simulation Models (Case Study: Tehran) 2015 Thesis for PhD, Islamic Azad University, Central Tehran Branch. )In Persian( |
|
27) Koezjakov, A., Urge-Vorsatz, D., Crijns-Graus, W., & Van den Broek, M. (2018). The relationship between operational energy demand and embodied energy in Dutch residential buildings. Energy and Buildings, 165, 233-245 |
|
28) Lee, B., Trcka, M., & Hensen, J. L. (2011). Embodied energy of building materials and green building rating systems—a case study for industrial halls. Sustainable Cities and Society, 1(2), 67-71 |
|
29) Mamqani Ghazi Jahani, Mahsa; Habib, Farah; Mofidi Shemirani, Seyed Majid; 2011, Energy Evaluation Structure for Sustainable Buildings, National Conference on Civil Engineering, Architecture, Urban Planning and Energy Management, Ardestan, Ardestan Branch. )In Persian( |
|
30) Mofidi Shemirani, Seyed Majid, Tahabaz, Mehraban, & Aida. (2019). Comparison of evaluation criteria in environmental ranking and building sustainability systems; (Example: BREEAM, LEED, CASBEE, DGNB and HQE systems). Journal of Environmental Science and Technology, 20 (6), 297-333)In Persian( |
|
31) Monteiro, A. C. S. (2015). Assessing initial embodied energy in building structures using LCA methodology (Doctoral dissertation). |
|
32) Moradi Mohammad, Asghar, Hosseini, Seyed Baqer, 2012, Controlling the environmental effects of the building by measuring and reducing the hidden energy of the surface unit in the construction phase (Case study: 7-storey residential building in the north. )In Persian( |
|
33) Myer, F., Fuller, R., & Crawford, R. H. (2012, January). The potential to reduce the embodied energy in construction through the use of renewable materials. In ASA 2012: Building on knowledge, theory and practice: Proceedings of the 46th Annual Conference of the Architectural Science Association (pp. 1-8). Architectural Science Association |
|
34) Petrov, L. P. (2011). Low embodied energy materials in sustainable design. Bachelor of Architectural Technology and Construction Management. |
|
35) Rauf, A. (2015). The effect of building and material service life on building life cycle embodied energy (Doctoral dissertation). Faculty of Architecture, Building & Planning، The University of Melbourne،189 |
|
36) Rauf, A., & Crawford, R. H. (2015). Building service life and its effect on the life cycle embodied energy of buildings. Energy, 79, 140-148. |
|
37) Surekha, B., Hegde, M. N., & Jagadish, K. S. (2016). Energy and Building Materials. International Journal of Civil Engineering, 5, 13-24. |
|
38) Thormark, Catarina. (2000)"Environmental analysis of a building with reused building materials." International Journal of Low Energy & Sustainable Building 1 |
|
39) Treloar GJ, Fay R, Ilozor B, P.E.D.Love. 2001 An analysis of the embodied energy of office buildings by height. Facilities; 19: 204-214. |
|
40) Treloar, G. J. (1998). Comprehensive embodied energy analysis framework (No. Ph. D.). Deakin University.Deakin University, Victoria; 311 |
|
41) www.yourhome.gov.au/.../YOURHOME-3-Materials-1-EmbodiedEnergy |
|
42) Yeo, D., & Gabbai, R. D. (2011). Sustainable design of reinforced concrete structures through embodied energy optimization. Energy and buildings, 43(8), 2028-2033 |
|
43) Yousefi, Gholipour, & Yaghoub. (2018). Evaluating the energy consumption of a real residential building in Tehran. Journal of Fine Arts-Architecture and Urban Planning, 23 (1), 81-92. )In Persian( |