List of articles (by subject)

---

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Study of Johnson-Cook Model Comprehensiveness at Moderate Strain Rate and Inverse Analysis to Modify the Constitutive Parameters Using Cold Wire Drawing Process
  Ashkan Mahmoud Aghdami Behnam Davoodi
  20.1001.1.27170314.2019.8.3.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets
  Mehran Yazdani Nogarani Reza Nosouhi
  20.1001.1.27170314.2019.8.1.2.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
  Mehdi Salari
  20.1001.1.27170314.2019.8.4.1.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation
  Mohammad Sajjad Mahdieh Mohammad Reza Esteki
  20.1001.1.27170314.2022.11.2.7.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L
  Ahmad Afsari Dara Fazel Jafar Karimisharifabadi Vahid Mehrabi
  20.1001.1.27170314.2020.9.3.4.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
  20.1001.1.27170314.2020.9.4.5.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
  20.1001.1.27170314.2020.9.4.2.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process
  Shahin Heidari Ahmad Afsari
  20.1001.1.27170314.2021.10.1.1.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Investigation of the Effect of Different Forming Pressure Curves on Formability of AA1050 Tubes in Warm Hydroforming Process
  Seyed Jalal Hashemi
  20.1001.1.27170314.2021.10.1.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Numerical and Experimental Investigation of Thickness Distribution in Hydromechanical Deep Drawing Process of Square Parts
  Farzad Rahmani Seyed Jalal Hashemi
  20.1001.1.27170314.2021.10.2.1.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process
  Abdolhamid Azizi Gholamali Gheiratmand Haghighi Pooya Bahrami Sahebali Manafi
  20.1001.1.27170314.2021.10.3.6.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method
  Mostafa Akbari Parviz Asadi Hossein Rahimi Asiabaraki
  20.1001.1.27170314.2021.10.2.5.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method
  Amir Neshastegir Kashi Farshid Ahmadi
  20.1001.1.27170314.2021.10.2.3.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
  Farshid Ahmadi Hadi Mansouri Elyas Sarami Foroushani
  20.1001.1.27170314.2022.11.3.1.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm
  Farshid Ahmadi Amir Abdollahi Saeid Zamani
  20.1001.1.27170314.2023.12.2.1.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Numerical and Experimental Comparison of Flow Stress and the Effect of Microcylinder Topography in the Barreling Test: An Artificial Neural Network Model
  Mohammad Honarpisheh Narges Shooshtari
  20.1001.1.27170314.2023.12.1.2.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet
  Moein Gholami Ali Hasanabadi
  20.1001.1.27170314.2023.12.1.3.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies
  Hamzeh Kazemi Heshmatollah  Haghighat