Kämper.Jan-Hinrich
Investigation of a Fully-automated Manufacturing Environment Realized through a Flexible Logistic System
[
Vol.11,
Issue
2
- SpringYear
2022]
Kafaei Kavoshian.Nazanin
Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process
[
Vol.5,
Issue
3
- SummerYear
2016]
Karami Khorramabadi.Mahdi
Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
[
Vol.13,
Issue
1
- WinterYear
2024]
Karami Khorramabadi.Mahdi
Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
[
Vol.12,
Issue
4
- AutumnYear
2023]
karami.bahman
Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels
[
Vol.5,
Issue
4
- AutumnYear
2016]
Karami.Mohammad Mehdi
Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study
[
Vol.10,
Issue
2
- SpringYear
2021]
karevan.ali
Analyze the Effect of the Maintenance Activities on the Internet Sustainability by Using 2k Factorial Experiment Design
[
Vol.7,
Issue
2
- SpringYear
2018]
Karimi.Jafar
Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process
[
Vol.9,
Issue
1
- WinterYear
2020]
Karimi.Jafar
Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L
[
Vol.9,
Issue
3
- SummerYear
2020]
Karimian.Majid
Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM)
[
Vol.5,
Issue
2
- SpringYear
2016]
Karimkhani.Behzad
Analysis of Orthotic Insoles Manufacturing for Treating Flatfoot Using Smart Orthotic Insole in Comparison with Traditional Methods
[
Vol.12,
Issue
3
- SummerYear
2023]
Karimkhani.Behzad
Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface
[
Vol.7,
Issue
4
- AutumnYear
2018]
Kashisaz.Sara
The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant
[
Vol.9,
Issue
2
- SpringYear
2020]
Kazazi.Mahdi
Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80
[
Vol.7,
Issue
3
- SummerYear
2018]
kazemi.ali
Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation
[
Vol.12,
Issue
1
- WinterYear
2023]
kazemi.hamzeh
Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies
[
Vol.12,
Issue
4
- AutumnYear
2023]
Kazemzadeh-Parsi.Mohammad Javad
Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results
[
Vol.9,
Issue
2
- SpringYear
2020]
Kazemzadeh-Parsi.Mohammad Javad
A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process
[
Vol.9,
Issue
4
- AutumnYear
2020]
Kazerooni.Afshin
Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process
[
Vol.5,
Issue
3
- SummerYear
2016]
Kebreyaeezade.Asghar
Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints
[
Vol.7,
Issue
3
- SummerYear
2018]
Kermani.Ehsan
An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys
[
Vol.9,
Issue
1
- WinterYear
2020]
Keshvari.Hamid
Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications
[
Vol.9,
Issue
2
- SpringYear
2020]
Khademizadeh.Hassan
The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
[
Vol.6,
Issue
2
- SpringYear
2017]
khajehpour.salar
Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures
[
Vol.10,
Issue
4
- AutumnYear
2021]
Khajehpour.Salar
Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss
[
Vol.11,
Issue
4
- AutumnYear
2022]
khakzar Bafruei.Morteza
Development of Linguistic Rules Diagnosis of Failure in Centrifugal Pump for Use in Expert System
[
Vol.4,
Issue
2
- SpringYear
2015]
Khalaj.Gholamreza
Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing
[
Vol.11,
Issue
4
- AutumnYear
2022]
Khaledan.Siyavash
A Comparison of Job-shop and Group Technology Using Simulation by ARENA
[
Vol.2,
Issue
4
- AutumnYear
2013]
Khaledan.Siyavash
A Comparison of Job-Shop and Group Technology Using Simulation by ARENA
[
Vol.3,
Issue
1
- WinterYear
2014]
Khalili.Khalil
Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision
[
Vol.8,
Issue
4
- AutumnYear
2019]
Khamedi.Ramin
Investigation of the Effect of Ferrite Grain Size on Acoustic Emission Signals
[
Vol.11,
Issue
3
- SummerYear
2022]
Khamedi.Ramin
Comparison of the Behavior of Martensitic and Ferrite Samples on Acoustic Emission Parameters
[
Vol.11,
Issue
4
- AutumnYear
2022]
khanaki.Hamid
Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density
[
Vol.9,
Issue
2
- SpringYear
2020]
khashei.mehdi
Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions
[
Vol.10,
Issue
2
- SpringYear
2021]
Kheiralipour.Kamran
Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision
[
Vol.8,
Issue
4
- AutumnYear
2019]
Kheirkhahan.Payam
Robust Anti-Windup Control Design for PID Controllers–Theory and Experimental Verification
[
Vol.6,
Issue
3
- SummerYear
2017]
Kheirkhahan.Payam
Robust Control of Electrically Driven Robots in the Task Space
[
Vol.6,
Issue
4
- AutumnYear
2017]
Kheirkhahan.Payam
Robust Fractional-order Control of Flexible-Joint Electrically Driven Robots
[
Vol.7,
Issue
1
- WinterYear
2018]
Kheirkhahan.Payam
An Alternative Stability Proof for Direct Adaptive Function Approximation Techniques Based Control of Robot Manipulators
[
Vol.7,
Issue
2
- SpringYear
2018]
Khodsetan.Mohsen
Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
[
Vol.8,
Issue
1
- WinterYear
2019]
Khorasani.Mohammad T.
Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications
[
Vol.9,
Issue
2
- SpringYear
2020]
Khorasani.Mohammad T.
Evaluating the Potential of Polycaprolactone/Heparinized Nano Fluoro Hydroxyapatite Composite Scaffolds for Advancing Bone Tissue Engineering: A Comprehensive Analysis of Biodegradability and Water Absorption
[
Vol.13,
Issue
1
- WinterYear
2024]
Khosravi.Mehdi
Investigation of the Effect of Ferrite Grain Size on Acoustic Emission Signals
[
Vol.11,
Issue
3
- SummerYear
2022]
Khosravi.Mehdi
Comparison of the Behavior of Martensitic and Ferrite Samples on Acoustic Emission Parameters
[
Vol.11,
Issue
4
- AutumnYear
2022]
Khosravian.Erfan
Effect of Welding Processing Parameters on FSW of Aerospace Grade Aluminum Alloys
[
Vol.13,
Issue
1
- WinterYear
2024]
Khosravifard.Ali
Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel
[
Vol.9,
Issue
2
- SpringYear
2020]
Khosrojerdi.Mohammad Reza
Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
[
Vol.5,
Issue
3
- SummerYear
2016]
Kirshkov.Pavel
An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying
[
Vol.9,
Issue
4
- AutumnYear
2020]
Kolahdooz.Amin
A Novel Optimization Approach Applied to Multi-Pass Turning Process
[
Vol.6,
Issue
2
- SpringYear
2017]
Kolahdooz.Amin
An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
[
Vol.6,
Issue
1
- WinterYear
2017]
Kolahdooz.Amin
Gentle Survey on MIR Industrial Service Robots: Review & Design
[
Vol.10,
Issue
1
- WinterYear
2021]
Kolahdooz.Amin
Gentle Survey on MIR Industrial Service Robots: Review & Design
[
Vol.10,
Issue
1
- WinterYear
2021]
Kolahdooz.Amin
Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
[
Vol.7,
Issue
3
- SummerYear
2018]
Kolahdoozan.Mojtaba
Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method
[
Vol.2,
Issue
3
- SummerYear
2013]