Mehdi Hosseinzadeh Articles List

List of Articles Mehdi Hosseinzadeh

Open Access Article
- Abstract Page
- Full-Text
1 - Effective Removal of Heavy Metal Ions Zn2+, Ni2+, Cu2+, Cr3+ from Aqueous Solution by Synthetic Superabsorbent Polymer
Mehdi Hosseinzadeh Farideh Mahmoodzadeh
20.1001.1.20083815.2020.14.2.1.5

Heavy metal pollution is propagating throughout the world with the enlargement of industrial activities. The elimination of heavy metal ions from industrial wastewaters has drawn much attention because of the hazardous effects of the heavy metal ions on different organi More

Heavy metal pollution is propagating throughout the world with the enlargement of industrial activities. The elimination of heavy metal ions from industrial wastewaters has drawn much attention because of the hazardous effects of the heavy metal ions on different organisms. According to these facts, poly (2, 2, 3, 3- tetracyanocyclopropyl) phenyl acrylate (PTCP) with multi cyanocyclopropane functionalities in the pendant group were prepared by reacting benzoyl peroxide with p-(2,2,3, 3-tetracyanocyclopropyl) phenylacrylate (TCP) monomer. (TCP) monomer was synthesized by reacting cyanogen bromide and malononitrile with p-acryloyloxybenzaldehyde at 0 °C in a short time. The synthesized PTCP momopolymer were examined in heavy metal ions adsorption such as Ni (II), Cu (II), Cr (III) and Zn (II) under competitive and non-competitive conditions in aqueous solutions at different pH. The high adsorption rate (<65 min) was seen. The synthesized polymer and its metal chelates were investigated by thermogravimetric analysis (TGA),Fourier-transform infrared spectroscopy (FT-IR), atomic absorption techniques (AAS), UV-vis spectroscopy and scanning electron microscopy (SEM). Manuscript profile
Open Access Article
- Abstract Page
- Full-Text
2 - Synthesis of Polyvinyltetrazole by Combination of Free Radical Polymerization and Click Chemistry for Adsorption of Pb (II) in Aqueous Solution
Mehdi Hosseinzadeh Farideh Mahmoodzadeh
20.1001.1.20083815.2019.13.2.4.1

Polyvinyltetrazole (PVT) is produced from acrylonitrile (AN) monomer by using free-radicalpolymerization and Click Chemistry methods. The resulting polymer with a broad range of tetrazolegroup contents was conveniently synthesized through [3+ 2] azide-nitrile cycloaddit More

Polyvinyltetrazole (PVT) is produced from acrylonitrile (AN) monomer by using free-radicalpolymerization and Click Chemistry methods. The resulting polymer with a broad range of tetrazolegroup contents was conveniently synthesized through [3+ 2] azide-nitrile cycloaddition reaction ofnitrile-containing polymer with sodium azide in DMF. The prepared PVT was characterized by13CNMR,FT-IR and UV-Vis spectroscopies. Elemental analysis indicated that approximately 92% ofthe cyano groups on the polymer surface were converted to tetrazolyl groups. The PVT exhibitedexcellent adsorption form et al ions and the maximum adsorption capacity for Pb (II) was2.39mmol/g which are much higher than corresponding literature results. The adsorption processwas described as an ion exchange and chelation interaction mechanisms. The high adsorption rate(<40 min) was seen. The resulting polymer and its metal chelate were characterized by FT-IR,elemental analysis, gravimetry, scanning electronic microscopy (SEM), thermogravimetry analysis(TGA), UV-Vis spectroscopy, and atomic absorption techniques (AAS). All these analyses methodsconfirmed the presence of metal in the polymer-metal complex. Manuscript profile
Open Access Article
- Abstract Page
- Full-Text
3 - A Facile Strategy for Synthesis of Well-defined Polypropylenegrafted-polystyrene /MMT Nanocomposite Using Reversible Addition: Fragmentation Chain Transfer Polymerization and Solution Intercalated Method
Saber Ghasemi Karaj-Abad Parisa Shamsno Mojtaba Abbasian Mehdi Hosseinzadeh Solmaz Esmaeily Shoja
20.1001.1.20083815.2023.17.3.4.1

A simple and easy synthetic route for preparing PP-g-PSt/O-MMt nanocomposite was synthesized using a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer polymerization techniques. Firstly, MAH (maleic anhydride) was reac More

A simple and easy synthetic route for preparing PP-g-PSt/O-MMt nanocomposite was synthesized using a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer polymerization techniques. Firstly, MAH (maleic anhydride) was reacted with PP (polypropylene) followed by the opening of an anhydride ring with ethanolamine to obtain a hydroxyl group including polypropylene (iPP-OH). Secondly, the produced PP-OH was treated with 4-cyano-4-[(phenylcarbothioyl) sulfanyl] pentanoic acid to synthesize of PP-RAFT macroinitiator. Then, the styrene monomer was grafted onto PP using RAFT approach to produce a well-defined (PP-g-PSt) copolymer. Finally, Polymer/clay nanocomposite was synthesized through a solution intercalation method. The successful synthesis of all materials was proved using FT-IR and 1H NMR spectroscopy. The structural morphology and thermal properties of the grafted copolymer /O-MMT nanocomposite were examined using SEM, TGA, and DSC. This approach employed via the RAFT method is an easy and alternative strategy for synthesizing new materials. Manuscript profile

Current Issue

Published Issues

Menu

Browse

List of Articles Mehdi Hosseinzadeh