A Simple and Systematic Approach for Implementing Boundary Conditions in the Differential Quadrature Free and Forced Vibration Analysis of Beams and Rectangular Plates
محورهای موضوعی : Engineering
S.A Eftekhari
1
(
Young Researchers and Elite Club, Karaj Branch, Islamic Azad University
)
کلید واژه: Differential quadrature method, Rectangular plates, Beams, Simple and systematic approach, Implementation of boundary conditions, Dirichlet-type boundary conditions, Neumann-type boundary conditions, Free and forced vibration analysis,
چکیده مقاله :
This paper presents a simple and systematic way for imposing boundary conditions in the differential quadrature free and forced vibration analysis of beams and rectangular plates. First, the Dirichlet- and Neumann-type boundary conditions of the beam (or plate) are expressed as differential quadrature analog equations at the grid points on or near the boundaries. Then, similar to CBCGE (direct Coupling the Boundary Conditions with the discrete Governing Equations) approach, the resulting analog equations are used to replace the differential quadrature analog equations of the governing differential equations at these points in order to solve the problem. But, unlike the CBCGE approach, the grid points near the boundaries are not treated as boundary points in the proposed approach. In other words, the degrees of freedom related to Dirichlet-type boundary conditions are only eliminated from the original discrete equations. This simplifies significantly the solution procedure and its programming. A comparison of the proposed approach with other existing methodologies such as the CBCGE approach and MWCM (modifying weighting coefficient matrices) method is presented by their application to the vibration analysis of beams and rectangular plates with general boundary conditions to highlight the advantages of the new approach.
[1] Bellman R.E., Casti J., 1971, Differential quadrature and long term integrations, Journal of Mathematical Analysis and Applications 34: 235-238.
[2] Bellman R.E., Kashef B.G., Casti J., 1972, Differential quadrature: a technique for the rapid solution of nonlinear partial differential equations, Journal of Computational Physics 10: 40-52.
[3] Bert C.W., Malik M., 1996, Differential quadrature method in computational mechanics: A review, ASME Applied Mechanics Reviews 49: 1-28.
[4] Shu C., 2000, Differential Quadrature and Its Application in Engineering, Springer.
[5] Bert C.W., Wang X., Striz A.G., 1993, Differential quadrature for static and free-vibration analyses of anisotropic plates, International Journal of Solids and Structures 30(13): 1737-1744.
[6] Du H., Liew K.M., Lim M.K., 1996, Generalized differential quadrature method for buckling analysis, Journal of Engineering Mechanics 122: 95-100.
[7] Civalek Ö., 2004, Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns, Engineering Structures 26(2): 171-186.
[8] Zong Z., Zhang Y., 2009, Advanced Differential Quadrature Methods, Chapman & Hall.
[9] Tanaka M., Chen W., 2001, Coupling dual reciprocity BEM and differential quadrature method for time-dependent diffusion problems, Applied Mathematical Modelling 25: 257-268.
[10] Shu C., Yao K.S., 2002, Block-marching in time with DQ discretization: an efficient method for time-dependent problems, Computer Methods in Applied Mechanics and Engineering 191: 4587-4597.
[11] Khalili S.M.R., Jafari A.A., Eftekhari S.A., 2010, A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads, Composite Structures 92(10): 2497-2511.
[12] Jafari A.A., Eftekhari S.A., 2011, A new mixed finite element-differential quadrature formulation for forced vibration of beams carrying moving loads, ASME Journal of Applied Mechanics 78(1): 011020.
[13] Eftekhari S.A., Jafari A.A., 2012, Numerical simulation of chaotic dynamical systems by the method of differential quadrature, Iranian Journal of Science and Technology, Transaction B 19(5): 1299-1315.
[14] Eftekhari S.A., Jafari A.A., 2012, Vibration of an initially stressed rectangular plate due to an accelerated traveling mass, Scientia Iranica: Transaction B, Mechanical Engineering 19(5): 1195-1213.
[15] Eftekhari S.A., Jafari A.A., 2013, Modified mixed Ritz-DQ formulation for free vibration of thick rectangular and skew plates with general boundary conditions, Applied Mathematical Modelling 37: 7398-7426.
[16] Eftekhari S.A., Jafari A.A., 2013, A simple and accurate mixed FE-DQ formulation for free vibration of rectangular and skew Mindlin plates with general boundary conditions, Meccanica 48: 1139-1160.
[17] Eftekhari S.A., Jafari A.A., 2014, High accuracy mixed finite element-differential quadrature method for free vibration of axially moving orthotropic plates loaded by linearly varying in-plane stresses, Scientia Iranica: Transaction B, Mechanical Engineering 21(6):1933-195.
[18] Bert C.W., Jang S.K., Striz A.G., 1988, Two new approximate methods for analysing free vibration of structural components, American Institute of Aeronautics and Astronautics 26: 612-618.
[19] Jang S.K., Bert C.W., 1989, Application of differential quadrature to static analysis of structural components, International Journal for Numerical Methods in Engineering 28: 561-577.
[20] Wang X., Bert C.W., 1993, A new approach in applying differential quadrature to static and free vibration of beams and plates, Journal of Sound and Vibration 162: 566-572.
[21] Wang X., Bert C.W., Striz A.G., 1993, Differential quadrature analysis of deflection, buckling, and free vibration of beams and rectangular plates, Computers & Structures 48(3): 473-479.
[22] Malik M., Bert C.W., 1996, Implementing multiple boundary conditions in the DQ solution of higher-order PDE’s: application to free vibration of plates, International Journal for Numerical Methods in Engineering 39: 1237-1258.
[23] Tanaka M., Chen W., 2001, Dual reciprocity BEM applied to transient elastodynamic problems with differential quadrature method in time, Computer Methods in Applied Mechanics and Engineering 190: 2331-2347.
[24] Shu C., Du H., 1997, Implementation of clamped and simply supported boundary conditions in the GDQ free vibration analysis of beams and plates, International Journal of Solids and Structures 34(7): 819-835.
[25] Shu C., Du H., 1997, A generalized approach for implementing general boundary conditions in the GDQ free vibration analyses of plates, International Journal of Solids and Structures 34(7): 837-846.
[26] Golfam B., Rezaie F., 2013, A new generalized approach for implementing any homogeneous and non-homogeneous boundary conditions in the generalized differential quadrature analysis of beams, Scientia Iranica: Transaction A, Civil Engineering 20(4): 1114-1123.
[27] Chen W.L., Striz A.G., Bert C.W., 1997, A new approach to the differential quadrature method for fourth-order equations, International Journal for Numerical Methods in Engineering 40: 1941-1956.
[28] Eftekhari S.A., Jafari A.A., 2012, A novel and accurate Ritz formulation for free vibration of rectangular and skew plates, ASME Journal of Applied Mechanics 79(6): 064504.
[29] Wu T.Y., Liu G.R., 1999, The differential quadrature as a numerical method to solve the differential equation, Computational Mechanics 24: 197-205.
[30] Wu T.Y., Liu G.R., 2000, The generalized differential quadrature rule for initial-value differential equations, Journal of Sound and Vibration 233: 195-213.
[31] Wu T.Y., Liu G.R., 2001, Application of the generalized differential quadrature rule to eighth-order differential equations, Communications in Numerical Methods in Engineering 17: 355-364.
[32] Fung T.C., 2001, Solving initial value problems by differential quadrature method-Part 2: second- and higher-order equations, International Journal for Numerical Methods in Engineering 50: 1429-1454.
[33] Fung T.C., 2002, Stability and accuracy of differential quadrature method in solving dynamic problems, Computer Methods in Applied Mechanics and Engineering 191: 1311-1331.
[34] Quan J.R., Chang C.T., 1989, New insights in solving distributed system equations by the quadrature methods, Part I: analysis, Computers & Chemical Engineering 13: 779-788.
[35] Meirovitch L., 1967, Analytical Methods in Vibrations, Macmillan.
[36] Rao S.S., 2007, Vibration of Continuous Systems, John Wiley & Sons, Inc.
[37] Moler C.B., Stewart G.W., 1973, An algorithm for generalized matrix eigenvalue problems, SIAM Journal on Numerical Analysis 10(2): 241-256.
[38] Bathe K.J., Wilson E.L., 1976, Numerical Methods in Finite Element Analysis, Prentic-Hall, Englewood Cliffs.
[39] Leissa A.W., 1973, The free vibration of rectangular plates, Journal of Sound and Vibration 31(3): 257-293.
[40] Eftekhari S.A., Jafari A.A., 2012, High accuracy mixed finite element-Ritz formulation for free vibration analysis of plates with general boundary conditions, Applied Mathematics and Computation 219: 1312–1344.
[41] Bert C.W., Malik M., 1996, The differential quadrature method for irregular domains and application to plate vibration, International Journal of Mechanical Sciences 38(6): 589-606.
[42] Wei G.W., Zhao, Y.B., Xiang, Y., 2002, Discrete singular convolution and its application to the analysis of plates with internal supports, Part 1: Theory and algorithm, International Journal for Numerical Methods in Engineering 55: 913-946.
