Temperature-Dependent Buckling Analysis of Functionally Graded Sandwich Cylinders
محورهای موضوعی : Engineering
Y Mohammadi
1
(Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran)
M Rahmani
2
(Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran)
کلید واژه: Functionally graded, Sandwich cylinder, Temperature-dependent properties, Buckling,
چکیده مقاله :
This study is limited to study of buckling analysis of a sandwich cylindrical shell with functionally graded face sheets and homogenous core. High-order sandwich plate theory is improved by considering the in-plane stresses of the core that usually are ignored in the analysis of sandwich structures. Assume that all properties of the face sheets and the core are temperature dependent. Strain components are obtained by using the nonlinear Von-Karman type relations. The equilibrium equations are derived via principle of minimum potential energy. Analytical solution for static analysis of simply supported sandwich conical shells with functionally graded face sheets under axial in-plane compressive loads and in the temperature environments is performed by using Navier’s solution. The results show the critical dimensionless static axial loads are affected by the configurations of the constituent materials, compositional profile variations, temperature and the variation of the sandwich geometry. The comparisons show that the present results are in the good agreement with the numerical results.
[1] Suresh S., Mortensen A., 1998, Fundamentals of Functionally Graded Materials, Barnes and Noble Publisher, London.
[2] Plantema F.G., 1966, Sandwich Construction, John Wiley & Sons Inc., New York.
[3] Allen H.G., 1969, Analysis and Design of Structural Sandwich Panels, Pergamon Press Inc., New York.
[4] Zenkert D., 1995, An Introduction to Sandwich Construction, Chameleon Press, London.
[5] Javaheri R., Eslami M. R., 2002, Thermal buckling of functionally graded plates, AIAA Journal 40(1): 162-169.
[6] Zhao X., Lee Y. Y., Liew K. M., 2009, Mechanical and thermal buckling analysis of functionally graded plates, Composite Structures 90(2): 161-171.
[7] Amir S., Khorasani M., BabaAkbar-Zarei H., 2018, Buckling analysis of nano composite sandwich plates with piezoelectric face sheets based on flexoelectricity and first-order shear deformation theory, Journal of Sandwich Structures & Materials 2018: 109963621879538.
[8] Bouderba B., Houari M.S.A., Tounsi A., Mahmoud S.R., 2016, Thermal stability of functionally graded sandwich plates using a simple shear deformation theory, Structural Engineering and Mechanics 58(3): 397-422.
[9] Amir S., 2016, Orthotropic patterns of visco-Pasternak foundation in nonlocal vibration of orthotropic graphene sheet under thermo-magnetic fields based on new first-order shear deformation theory, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.
[10] Sepiani H.A., Rastgoo A., Ebrahimi F., Arani A.G., 2010, Vibration and buckling analysis of two-layered functionally graded cylindrical shell, considering the effects of transverse shear and rotary inertia, Materials & Design 31(3): 1063-1069.
[11] Amir S., Bidgoli E.M.R., Arshid E., 2018, Size-dependent vibration analysis of a three-layered porous rectangular nano plate with piezo-electromagnetic face sheets subjected to pre loads based on SSDT, Mechanics of Advanced Materials and Structures 2018: 1-15.
[12] Frostig Y., Baruch M., Wilnay O., Shienman I., 1992, High-order theory for sandwich-beam behavior with transversely flexible core, Journal of Engineering Mechanics 118(5): 1026-1043.
[13] Frostig Y., Baruch M., 1994, Vibration of sandwich beams-a high-order theory approach, Journal of Sound and Vibration 176(2): 195-208.
[14] Bozhevolnaya E., Frostig Y., 2001,Free vibration of curved sandwich beams with a transversely flexible core, Journal of Sandwich Structures and Materials 3: 311-342.
[15] Bozhevolnaya E., Sun J.Q., 2004, Free vibration analysis of curved sandwich beams, Journal of Sandwich Structures and Materials 6: 47-76.
[16] Frostig Y., Thomsen O.T., 2004, High-order free vibration of sandwich panels with a flexible core, International Journal of Solids and Structures 41: 1697-1724.
[17] SchwartsGivli H., Rabinovitch O., Frostig Y., 2008, Free vibration of delaminated unidirectional sandwich panels with a transversely flexible core and general boundary conditions-a high-order approach, Journal of Sandwich Structures and Materials 10: 99-131.
[18] Mohammadi Y., Khalili S.M.R., 2011, Effect of geometrical and mechanical properties on behavior of sandwich beams with functionally graded face sheets under indentation loading, Journal of Materials: Design and Applications 225: 231-244.
[19] Seidi J., Khalili S.M.R., Malekzadeh K., 2015, Temperature-dependent buckling analysis of sandwich truncated conical shells with FG face sheets, Composite Structures 131: 682-691.
[20] Flu W., 1973, Stresses in Shells, Springer-Verlag, New York.
[21] Bush B.O., Almroth B.O., 1975, Buckling of Bars, Plates and Shells, McGraw-Hill, New York.
[22] Theodore von K., Hsue-Shen T., 1941,The buckling of thin cylindrical shells under axial compression, Journal of the Aeronautical Sciences 8(8): 303-312.
[23] Winterstetter T.A., Schmidt H., 2002, Stability of circular cylindrical shells under combined loading, Journal of Thin-Walled Structures 40: 893-909.
[24] Kim S.E., Kim C.S., 2002, Buckling strength of cylindrical shell and tank subjected to axially compressive loads, Journal of Thin-Walled Structures 40: 329-353.
[25] Pinna R., Ronalds B.F., 2002, Buckling and post-buckling of shells with one end pinned and the other end free, Journal of Thin-Walled Structures 40: 507-525.
[26] Ru C.Q., 2000, Effect of van der Waals force on axial buckling of a double walled carbon nanotube, Journal of Applied Physics 87: 7227-7231.
[27] Eslami M.R., Javaheri R.,1999, Buckling of composite cylindrical shells under mechanical and thermal loads, Journal of Thermal Stresses 22: 527-545.
[28] Eslami M.R., Shahsiah R.,2001, Thermal buckling of imperfect cylindrical shells, Journal of Thermal Stresses 24: 71-89.
[29] Mushtari K.M., Sachenkov A.V., 1958, Stability of cylindrical and conical shells of circular cross section with simultaneous actin of axial compression and external normal pressure, NACA TM 1433: 667-674.
[30] Lopatin A.V., Morozov E.V., 2015, Buckling of the composite sandwich cylindrical shell with clamped ends under uniform external pressure, Journal of Composite Structures122: 209-216.
[31] Malinowski M., Belica T., Magnucki K., 2015, Bucklingandpost-buckling behavior of elastic seven-layered cylindrical shells – FEM study, Journal of Thin-Walled Structures 94: 478-484.
[32] Hui-Shen S., 2002, Postbuckling analysis of axially-loaded functionally graded cylindrical shells in thermal environments, Journal of Composites Science and Technology 62: 977-987.
[33] Hui-Shen S., 2003, Postbuckling analysis of pressure-loaded functionally graded cylindrical shells in thermal environments, Journal of Engineering Structures 22: 977-987.
[34] Lis R., Batra R.C., 2006, Buckling of axially compressed thin cylindrical shells with functionally graded middle layer, Journal of Thin-Walled Structures 44: 1039-1047.
[35] Sofiyev A.H., 2014, The vibration and buckling of sandwich cylindrical shells covered by different coatings subjected to the hydrostatic pressure, Journal of Composite Structures 117: 124-134.
[36] Shahsiah R., Eslami M.R., 2003, Functionally graded cylindrical shell thermal instability based on improved donnell equations, AIAA Journal 41: 19-26.
[37] Woo J., Meguid S.A., Stranart J.C., Liew K.M., 2005,Thermo mechanical post buckling analysis of moderately thick functionally graded plates and shallow shells, International Journal of Mechanical Sciences 47: 1147-1171.
[38] Ravikiran K., Ganesan N., 2006, Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-specified boundary condition, Journal of Sound and Vibration 289: 450-480.
[39] Khalili S.M.R., Mohammadi Y., 2012, Free vibration analysis of sandwich plates with functionally graded face sheets and temperature-dependent material properties: A new approach, European Journal of Mechanics A/Solids 35: 61-74.
[40] Reddy J.N., 2012, Thermal Mechanical Behavior of Functionally Graded Materials, Texas.
[41] Mohammadi Y., Khalili S.M.R., Malekzadeh Fard K., 2016, Low velocity impact analysis of sandwich plates with functionally graded face sheets, Mechanics of Advanced Materials and Structures 23(4): 363-374.
