Analysis and Control of Chaos in Nonlinear Gear System using Predictive Sliding Mode Control
محورهای موضوعی :
vibration and control
Nima Valadbeigi
1
,
Seyed Mahdi Abtahi
2
1 - Department of Mechanical Engineering,
Industrial and Mechanics Faculty,
Qazvin Islamic Azad University, Iran
2 - Department of Mechanical Engineering,
Industrial and Mechanics Faculty,
Qazvin Islamic Azad University, Iran
تاریخ دریافت : 1400/10/23
تاریخ پذیرش : 1401/01/26
تاریخ انتشار : 1401/03/11
کلید واژه:
Chaos analysis,
Chaotic vibration,
Gearbox system,
Bifurcation diagram,
Predictive Sliding Mode Control,
چکیده مقاله :
This paper presents a control system for elimination of chaotic behaviors in spur gear system. To this end, at first different aspects of chaos are investigated by means of numerical tools including time series response, phase plane trajectories, bifurcation diagram, Poincare’ section, Lyapunov exponent and power spectrum density. The nonlinear dynamic model encompasses constant mesh stiffness and damping along the line of action, static transmission error and backlash. In order to suppress the chaotic oscillations, a novel controller on the basis of the Predictive Sliding Mode Control (PSMC) is proposed in which the sliding surface is predicted by the use of model predictive control theory and the control input is obtained. Consequently, the control system takes advantage of the both approaches in developing a robust controller. The simulation results of the feedback system depict the effectiveness of the controller in elimination of the chaotic vibrations along with reduction of settling time, overshoots, and energy consumption. Furthermore, stability and robustness of the system are guaranteed.
منابع و مأخذ:
Hongler, M., Streit, M., On the Origin Of Chaos In Gearbox Models, Physica D: Nonlinear Phenomena, Vol. 29, No. 3, 1988, pp. 402-408, doi.org/10.1016/0167-2789(88)90038-3.
De Souza, S., Caldas, I., Viana, R., and Balthazar, J., Sudden Changes in Chaotic Attractors and Transient Basins in A Model for Rattling in Gearboxes, Chaos, Solitons & Fractals; Vol. 21, No. 3, 2004, pp. 763-772, doi.org/10.1016/j.chaos.2003.12.096.
De Souza, S., Caldas, I., Viana, R., Batista, A., and Kapitaniak, T., Noise-Induced Basin Hopping in A Gearbox Model, Chaos, Solitons & Fractals, Vol. 26, No. 5, 2005, pp. 1523-1531, doi.org/10.1016/j.chaos.2005.04.033.
Gou, X., Zhu, L., and Qi, C., Nonlinear Dynamic Model of a Gear-Rotor-Bearing System Considering the Flash Temperature, Journal of Sound and Vibration; Vol. 410, No. 8, 2017, pp. 187-208, doi.org/10.1016/j.jsv.2017.08.014.
Bozca, M., Transmission Error Model-Based Optimization of the Geometric Design Parameters of An Automotive Transmission Gearbox to Reduce Gear-Rattle Noise, Applied Acoustics, Vol. 130, No. 15, 2017, pp. 247-259, doi.org/10.1016/j.apacoust.2017.10.005.
Farshidianfar, A., Saghafi, A., Identification and Control of Chaos in Nonlinear Gear Dynamic Systems Using Melnikov Analysis, Physics Letters A, Vol. 378, No. 46, 2014, pp. 3457-3463, doi.org/10.1016/j.physleta.2014.09.060.
Delavari, H., Mohadeszadeh, M., Chaos Control in a Gear Transmission System via a Novel Adaptive Terminal Sliding Mode Control Approach with Nonlinearity in the Control Input, Journal of Control, Vol. 10, No. 4, 2016, pp. 45-35, joc.kntu.ac.ir/article-1-311-fa.html (in Persian).
Garcia Gabin, W., Camacho, E., Sliding Mode Model Based Predictive Control for Non-Minimum Phase Systems, European Control Conference (ECC), Cambridge, UK, 2003, pp. 904-909, 10.23919/ECC.2003.7085073.
Incremona, G., Ferarra, A., and Magni, L., Hierarchical Predictive/Sliding Mode Control of Nonlinear Constrained Uncertain Systems, IFAC-Papers Online, Vol. 48, No. 23, 2015, pp. 102-109, doi.org/10.1016/j.ifacol.2015.11.268.
Temel, T., Ashrafiuon, H., Nataraj, C., and Yildirim, S., A New Sliding-Mode Model Predictive Controller for Output Tracking of Nonlinear Systems with Online Optimization, International Journal of Advanced Research, Vol. 3, No. 9, 2015, pp. 660-664.
Hassine, I., Naouar, M., Extended Model Predictive-Sliding Mode Control for Three-Phase Grid Connected Converters, IEEE Transactions on Industrial Electronics, Vol. 64, No. 2, 2017, pp. 1341-1349, 10.1109/TIE.2016.2618867.
Spasic, M., Hovd, M., Matic, D., and Antic, D., Tube Model Predictive Control with An Auxiliary Sliding Mode Controller, Modeling, Identification and Control, Vol. 37, No. 3, 2016, pp.181-193, 10.4173/mic.2016.3.4.
Haus, B., Rohl, J., Mercorelli, P., and Aschemann, H., Model Predictive Control for Switching Gain Adaptation in A Sliding Mode Controller of a DC Drive with Nonlinear Friction, 22nd International Conference on System Theory, Control and Computing (ICSTCC), Sinaia, Romania, 2018, 10.1109/ICSTCC.2018.8540681.
Chang Jian, C., Chang, S., Bifurcation and Chaos Analysis of Spur Gear Pair with And Without Nonlinear Suspension, Nonlinear Analysis: Real World Applications, Vol. 12, No. 2, 2011, pp. 979-989, doi.org/10.1016/j.nonrwa.2010.08.021.
Slotin, J., Li, W., Applied Nonlinear Control, Eglewood Cliffs, NJ, USA: Prentice Hall, 1991.
Cheng, X., Wang, P., Liu, L., and Tang, G., Predictive Sliding Mode Control Using Feedback Linearization for Hypersonic Vehicle, Procedia Engineering, Vol. 99, 2015, pp. 1076-1081, doi.org/10.1016/j.proeng.2014.12.642.
Camacho, E., Bordons, C., Model Predictive Control, 2nd ed. London, UK: Springer-Verlag London, 2007.
Gharagozloo, M., Shahmansoorian, A., Chaos Control in Gear Transmission System using GPC and SMC Controllers, Journal of Applied and Computational Mechanics, 2020.
Khalil, H. K., Lyapunov Stability, Control Systems, Robotics and AutomatioN–Volume XII: Nonlinear, Distributed, and Time Delay Systems-I, Vol. 11, 2009, pp. 115.
Muller, P., Popov and Circle Criterion, Control, Systems Robotics, and Automation, Vol. 3.
Haddad, W., Chellaboina, V., Nonlinear Dynamical Systems and Control, Princeton University Press, 2011.
