• Home
  • The effect of external and internal shading devices on energy consumption and co2 emissions of residential buildings in temperate climate

Share To

Article Url


Manuscript ID : SOIJ-2201-1476 (R1) Visit : 291 Page: 75 - 89

10.22094/soij.2022.1950918.1476

Article Type: Original Research

The effect of external and internal shading devices on energy consumption and co2 emissions of residential buildings in temperate climate

Subject Areas : Space Ontology International Journal

Samira Razazi 1 , Fatemeh Mozaffari Ghadikolaei 2 , Raheleh Rostami 3

1 - Department of Architecture, Faculty of Engineering, Islamic Azad University-Sari Branch, Sari, Iran
2 - Department of Architecture, Faculty of Engineering, Islamic Azad University-Sari Branch, Sari, Iran
3 - Department of Architecture, Faculty of Engineering, Islamic Azad University-Sari Branch, Sari, Iran

Received: 2022-01-27 Accepted : 2022-05-01 Published : 2022-03-01

Keywords:

Abstract :

References:


  1. Aelenei, D., Aelenei, L., Pacheco Vieira, C. (2016). Adaptive façade: concept, applications, research questions, Energy Proc; 91: 269–275.
    2.
  2. Ahmed, A. A. E. M. M. A. (2012). “Using simulation for studying the influence of vertical shading devices on the thermal performance of residential buildings (Case study: New Assiut City),” Ain Shams Eng. J. 3(2):163–174
    3.
  3. Al Touma, A., Ouahrani D. (2018). Quantifying Savings in Spaces Energy Demands and CO2 Emissions by Shading and Lighting Controls in the Arabian Gulf. Journal of Building Engineering, 18: 429-437. https://doi.org/10.1016/j.jobe.2018.04.005
    4.
  4. Aldawoud, A. (2013). Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate. Energy Build, 59:104–10. http://dx.doi.org/10.1016/j.enbuild.2012.12.031.
    5.
  5. Al-Masrani, S.M., Al-Obaidi K.M., Zalin N.A., Isma M.I.A. (2018). Design optimization of solar shading systems for tropical office buildings: challenges and future trends, Sol. Energy, 170:849–872.
    6.
  6. Almusaed, A., Almssad, A. (2015). "Building Materials in Eco-energy Houses from Iraq and Iran", Case Studies in Construction Materials, 2: 42-56.
    7.
  7. Al-tamimi, NA., Fairuz, S., Fadzil, S. (2011).The potential of shading devices for temperature reduction in high-rise residential buildings in the tropics. Procedia Eng, 21:273–82. http://dx.doi.org/10.1016/j.
    8.
  8. Attia, S., Bilir, S., Safya, T., Struck, C., Loonen, C., Goia F. (2018). Current trends and future challenges in the performance assessment of adaptive façade systems, Energy Build. 179:165–182.
    9.
  9. Atzeri, A., Cappelletti, F., Gasparella, A. (2014). Internal versus external shading devices performance in office buildings, Energy Procedia, 45:463–472.
    10.
  10. Ayoub, M. (2018). Integrating illuminance and energy evaluations of cellular automata controlled dynamic shading system using new hourly-based metrics, Sol. Energy, 170:336–351.
    11.
  11. Babaizadeh, H., Haghighi, N., Asadi, S., Broun, R., Riley, D. (2015). Life cycle assessment of exterior window shadings in residential buildings in different climate zones. Build Environ .90:168–77.
    12.
  12. Corrado,V., Filippi,M., Serra,V.(2001). A detailed analysis of the effects of external shading systems on window solar gain in China 2000/Napoli 2001, The Seventh REHVA World Congress, 15–18September, Napoli, 2001.
    13.
  13. Elzeyadi, I., Abboushi, B., Hadipour, H., Reviera, L. (2016). High performance façades: measuring the impacts of dynamic shading prototypes on indoor environmental quality using yearly simulations and field tests, Proceedings of PLEA Cities, Buildings, People: towards Regenerative Environments, Los Angeles, CA, pp.1023–1032.
    14.
  14. Elzeyadi, I. (2017). The impacts of dynamic façade shading typologies on building energy performance and occupant's multi-comfort, Architect. Sci. Rev. 60:316–324.
    15.
  15. Evola, G., Gullo, F., Marletta, L. (2017). The role of shading devices to improve thermal and visual comfort in existing glazed buildings. Energy Proc. 134: 346–355. http://dx.doi.org/10.1016/j.egypro. 09.543.
    16.
  16. Fatahi, Sh., Tanba, A., Normohamadi, R. (2017). Investigating the Role of Shading devices in Thermal Comfort of Hot and Humid Climate of Iran (Case Study of Residential Texture in Ahvaz), National Conference on Basic Research in Civil Engineering, Architecture and Urbanism,Tehran, pp 17-18. (In Persian). https://civilica.com/doc/789658/.
    17.
  17. Fathalian, A., Kargar Sharifabad,H.(2017). Energy Building Simulation for Office Building with DesignBuilder Software and Its Validation with Energy Bills, 3rd Iranian Heat and Mass Transfer Conference, Iran, (In Persian). Babol, Dec2017, https://civilica.com/doc/698797/.
    18.
  18. Fayaz, R., Kari, B. M. (2009). Comparison of energy conservation building codes of Iran, Turkey, Germany, China, ISO 9164 and EN 832. Applied Energy, 86, 1949-1955.
    19.
  19. Fazeli, N., Mahdavinejad, M., Bemaniyanc, M.R. (2019). Dynamic Envelope and Control Shading Pattern for Office Buildings Visual Comfort in Tehran, Space Ontology International Journal,8(3): 31-40.
    20.
  20. Feizabadi, M., Rezaei, N. (2015). Possibility of its development in native constructions "Reed" Investigation of the use of materials in North of Iran. 3th International Congress on Civil Engineering, Architecture and Urban Development. Shahid Beheshti University, Tehran, Iran, 29-31 December 2015, P-4. (In Persian).
    21.
  21. Giovannini, L., LoVerso, V.R.M., Karamata, B. M. (2015). Andersen, Lighting and energy performance of an adaptive shading and day lighting system for arid climates, Energy Proced 78: 370–375.
    22.
  22. Hashemi, A., Khatami, N. (2017). Effects of solar shading on thermal comfort in low-income tropical housing. Energy Proc.111: 235–244. http://dx.doi.org/10.1016/j.egypro.2017.03.025.
    23.
  23. Huang, Y., Niu, JL., Chung TM. (2014). Comprehensive analysis on thermal and day lighting performance of glazing and shading designs on office building envelope in cooling-dominant climates. Appl Energy, 134:215–28.
    24.
  24. Inoue, T., Kawase, T., Ibamoto, T., Takakusa S., Matsuo Y. (1988). The development of an optimal control system for window shading devices based on investigations in office buildings, ASHRAE Transactions. 94.
    25.
  25. Jayathissa, P., Luzzatto, M., Schmidli, J., Hofer, J., Nagy N., Schlueter, A. (2017). Optimizing building net energy demand with dynamic BIPV shading, Appl. Energy .202:726–735.
    26.
  26. Jayathissa, P., Zarb, J., Luzzatto, M., Hofer, J., Schlueter, A. (2017). Sensitivity of building properties and use types for the application of adaptive photovoltaic shading systems, Energy Proc .122:139–144.
    27.
  27. Johari, S., Masoudinejad, M. (2018). Analysis and selection of applications in building energy consumption simulation, International Congress of Leading Contemporary Architecture and Urban Planning in Islamic Countries, Iran, Mashhad, (In Persian). May 2018 https://civilica.com/doc/809546/.
    28.
  28. Karimpour, A.R., Diba, D., Eetesam, E. (2017).Analysis of interior shades efficiency on energy consumption by Using simulation models (case study: residential building in Tehran), Hoviat shahr journal, 30(11)17-30. (In Persian).
    29.
  29. Kasmai, M. (2003). Climate and Architecture, Khak publication, Second edition, Isfahan, Iran. P.52-54. (In Persian).
    30.
  30. Kim, G., Lim, H.S., Lim, T.S., Schaefer, L., Kim, J.T. (2012). Comparative advantage of an exterior shading device in thermal performance for residential buildings, Energy Build. 46:105–111.
    31.
  31. Kirimtat, A., Koyunbaba, BK., Chatzikonstantinou, I., Sariyildiz, S. (2016). Review of simulation modeling for shading devices in buildings. Renew Sustain Energy Rev. 53:23–49.
    32.
  32. Konstantzos, I., Tzempelikos, A., Chan, Y. (2015). Experimental and simulation analysis of daylight glare probability in offices with dynamic window shades, Build. Environ.87:244–254.
    33.
  33. Lau, A.K.K., Salleh, E., Lim, C.H., Sulaiman, M.Y. (2016). Potential of shading devices and glazing configurations on cooling energy savings for high-rise office buildings in hot-humid climates: the case of Malaysia, Int. J. Sust. Built Environ.5: 387–399.
    34.
  34. Lauren, F. (2000). Green Building Materials City of Santa Monico, USA.
    35.
  35. Lee, E.S., Tavil, A. (2007). Energy and visual comfort performance of electrochromic windows with overhangs; Building and Environment .42: 2439–2449.
    36.
  36. Lim, Y.-W., Kandar, M.Z., Ahmad, M.H., Ossen D.R. (2012). Abdullah A.M, Building façade design for day lighting quality in typical government office building, Build. Environ.57:194–204.
    37.
  37. Loonen, R.C.G.M., Trčka, M., Cóstola, M., Hensen, J.L.M. (2013). Climate adaptive building shells: state-of-the-art and future challenges, Renew. Sustain. Energy Rev.25:483–493.
    38.
  38. Mangkuto, R.A., Feradi, F., Putra, R.E., Atmodipoero, R.T., Favero, F. (2018). Optimization of daylight admission based on modifications of light shelf design parameters, J. Build. Engineer.18:195–209.
    39.
  39. Modiri,M.,Zahab.N,S.,Alibakhshi,Z.,Afsharmanesh ,H.,Abasi,m.(2012). Investigating the proper direction of buildings based on sunlight and wind direction (Case study: Gorgan city), Scientific-research quarterly Geography (Regional Planning) Journal.2:141-156.
    40.
  40. Mohammad, Sh. (2013). Study of thermal behavior of common material in wall structure, case study; residential building in Tehran, architecture and urbanism fine arts press .18(1):69-78. (In Persian).
    41.
  41. Mohammadi, M., Daraio, J.A. (2020). Improving the Energy Efficiency of Existing Residential Buildings by Applying Passive and Cost-Effective Solutions in the Hot and Humid Region of Iran. Space Ontology International Journal.9(4):77-96.
    42.
  42. Nasrollahi, F. (2011). Architectural and urban planning criteria to reduce the energy consumption of buildings, National energy committee of Iran press. P .2-5. (In Persian).
    43.
  43. New life - old structure a selection of valuable structures. (1372). Ministry of housing and development publication, Tehran, Iran, p-71. (In Persian).
    44.
  44. Newsham, G.R. (1994). Manual control of window blinds and electric lighting: implications for comfort and energy consumption, Indoor Environment. 3 (3).
    45.
  45. Razjouyan, M. (2015). Comfort design with climate, Shahid Beheshti University press, Second edition.P-187. (In Persian).
    46.
  46. Reinhart, C.F.,Voss, K. (2003). Monitoring manual control of electric lighting and blinds, Lighting Research and Technology.35 (3).
    47.
  47. Roshan,G.R., Farrokhzad, M., Attia,S. (2017). Defining thermal comfort boundaries for heating and cooling demand estimation in Iran's urban settlements. Building and environment 121:168-189.
    48.
  48. Sghiouri, H., Mezrhab, A., Karkri, M., Naji, H. (2018). Shading devices optimization to enhance thermal comfort and energy performance of a residential building in Morocco, Journal of Building Engineering.18: 292-302. https://doi.org/10.1016/j.jobe.2018.03.018
    49.
  49. Sheikhzadeh, GH.A ., Khorasanizadeh, H., Sabzposhani, M. (2006). Investigation of shading devices and determining their effect on building cooling loads.Fifth Conference on Optimizing Fuel Consumption in Buildings ,Tehran, Iran.p-8.
    50.
  50. Singh, R., Lazarus, I.J., Kishore, V.V.N. (2015). Effect of internal woven roller shade and glazing on the energy and day lighting performances of an office building in the cold climate of Shillong. Appl. Energy.159:317–333. http://dx.doi.org/10.1016/j. apenergy.2015.09.009.
    51.
  51. Taleb, H.A., Sharples, S. (2011). “Developing sustainable residential buildings in Saudi Arabia: A case study,” Appl. Energy, Jan.88:383-391.file:///C:/Users/Reviewer/Downloads/1-s2.0-S003809.
    52.
  52. The Building Architectural Design. (2002). Chapter 4: in Los Alamos National Laboratory Sustainable Design Guide, p. 57.
    53.
  53. The Iranian Building Code 13. (2003). Design and implementation of electrical installations of buildings. Iranian Building Code National Committee, Tehran, Iran, (In Persian). 2003.prd.behdasht.gov.ir/uploads/IranNR-13.pdf.
    54.
  54. The Iranian Building Code 19. (2009).Energy Conservation. Iranian Building Code National Committee, Tehran, (In Persian). Revised 7 Dec 2014 from prd.behdasht.gov.ir/uploads/IranNR-19.pdf.
    55.
  55. Tzempelikos, A., Athienitis, A. K. (2007). The impact of shading design and control on building cooling and lighting demand, Sol. Energy ,81(3)369–382.
    56.
  56. Valladares-Rendón, L.G., Schmid, G., Lo, S.-L. (2017). Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of façade shading systems, Energy Build.140: 458–479.
    57.
  57. Watson, D., Labs, K. (2009). Climate design: Energy-Efficient building principles and practices. Translated by Ghobadian V,Faze Mahdavi M,11th edition, University of Tehran Press. P-177. (In Persian).
    58.
  58. Yao, J. (2014). An investigation into the impact of movable solar shades on energy, indoor thermal and visual comfort improvements. Build Environ. 71:24–32. http://dx.doi.org/10.1016/j.buildenv.2013.09.011.
    59.
  59. Yao, R., Costanzo, V., Li, X., Zhang, Q., & Li, B. (2018). The effect of passive measures on thermal comfort and energy conservation. A case study of the hot summer and cold winter climate in the Yangtze River region. Journal of Building Engineering, 15: 298–310. https://doi.org/10.1016/j.jobe.2017.11.012 Available at http://centaur.reading.ac.uk/74023/
    60.
  60. Ye, Y., Xu, P., Mao, J., Ji, Y. (2016). Experimental study on the effectiveness of internal shading devices, Energy Build. 111:154–163.
    61.
  61. Yoon, Y. B., Kim, D. S., & Lee, K. H. (2014). Detailed heat balance analysis of the thermal load variations depending on the blind location and glazing type. Energy and Buildings, 75, 84-95.
    62.
  62. Zarif, M., Jamei, A. (2018). The role of various types of external canopies in order to optimize the thermal behavior of buildings in low-income housing, International Conference on Civil Engineering, Architecture and Urban Development Management in Iran, Tehran, (In Persian). Aug 2018, https://civilica.com/doc/847188/.
    63.
  63. Zomordian, Z., Tahsildost, M. (2015). Validation of energy simulation software in buildings: with an experimental and comparative approach, Iranian Energy Journal, 18:115-131. (In Persian). http://necjournals.ir/browse.php?mag_id=52&slc_lang=fa&sid=1.
    64.

Online References

  1. Designbuilder Software Product Overview. [Online]. Available: https://www.designbuilder.co.uk/software/product-overview. [Accessed: 05-Feb-2018].
    2.
  2. EUROPEAN COMMISSION. (2017). Energy Performance of Buildings Directive (2010/31/EU), Retrieved 11 Dec, 2017 from https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings/nearly-zero-energy-buildings.
    3.
  3. (2015). Energy balance statistic, Retrieved 11 July, 2017, from https://www.iea.org/Sankey/#?c=Islamic Republic of Iran&s=Final consumption.
    4.
  4. Mermet sun control textiles, the brochure of thermal and optical fabrics properties, Retrieved Sep 19, 2020, from http;//www.sunscreen-mermet.com.
    5.
  5. Portal of the Iranian Environmental Protection Agency, Retrieved Feb 23, 2020, from http;//www.doe.ir.
    6.

Sanad

Sanad is a platform for managing Azad University publications

Links

Related Centers

Technical Support

Official pages

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]