Asymmetric Thermal Stresses of Hollow FGM Cylinders with Piezoelectric Internal and External Layers
Subject Areas : Engineering
1 - Postgraduate School, Islamic Azad University, South Tehran Branch
2 - Postgraduate School, Islamic Azad University, South Tehran Branch
Keywords:
Abstract :
[1] Wu C. P., Syu Y. S., 2007, Exact solutions of functionally graded piezoelectric shells under cylindrical bending, International Journal of Solids and Structures 44: 6450-6472.
[2] Wang H.M., Xu Z.X. , 2010, Effect of material inhomogeneity on electromechanical behaviors of functionally graded piezoelectric spherical structures, Computational Materials Science 48: 440-445.
[3] Li X.Y., Ding H.J., Chen W.Q., 2008, Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk, International Journal of Solids and Structures 45:191-210.
[4] Tiersten HF., 1969, Linear Piezoelectric Plate Vibrations, New York, Plenum Press.
[5] Kapuria S., Dumir PC., Sengupta S., 1996, Exact piezothermoelastic axisymmetric solution of a finite transversely isotropic cylindrical shell, Computers & Structures 61:1085-1099.
[6] Lutz M.P., Zimmerman R.W., 1996, Thermal stresses and effective thermal expansion coefficient of functionally graded sphere, Journal of Thermal Stresses 19: 39-54.
[7] Zimmerman R.W., Lutz M.P., 1999, Thermal stresses and thermal expansion in a uniformly heated functionally graded cylinder, Journal of Thermal Stresses 22:177-188.
[8] Jabbari M., Sohrabpour S., Eslami M.R., 2003, General solution for mechanical and thermal stresses in functionally graded hollow cylinder due to radially symmetric loads, Journal of Applied Mechanics 70:111-118.
[9] Jabbari M., Sohrabpour S., Eslami M.R., 2002, Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads, International Journal Pressure Vessels and Piping 79: 493-497.
[10] Jabbari M., Bahtui A., Ealami M.R., 2009, Axisymmetric mechanical and thermal stresses in thick short length functionally graded material cylinder, International Journal Pressure Vessels and Piping 86: 296-306.
[11] Jabbari M., Meshkini M., Ealami M.R., 2012, Nonaxisymmetric mechanical and thermal stresses in functionally graded porous piezoelectric material hollow cylinder, International Journal Pressure Vessels Technology 134:061212-061237.
[12] Poultangari R., Jabbari M., Eslami M.R., 2008, Functionally graded hollow spheres under non-axisymmetric thermo-mechanical loads, International Journal Pressure Vessels and Piping 85: 295-305.
[13] Ootao Y., Tanigawa Y., 2004, Transient thermoelastic problem of functionally graded thick strip due to non uniform heat supply, Composite Structures 63(2):139-146.
[14] Alibeigloo A., Chen W.Q., 2010, Elasticity solution for an FGM cylindrical panel integrated with piezoelectric layers, European Journal of Mechanics - A/Solids 29: 714-723.
[15] Dai H. L., Hong L., Fu Y. M., Xiao X., 2010, Analytical solution for electro magnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder, Applied Mathematical Modeling 34: 343-357.
[16] Chen W. Q., Bian Z, G., Lv C.F., Ding H.J., 2004, 3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid, International Journal of Solids and Structures 41: 947-964.
[17] He X. Q., Ng T.Y., Sivashanker S., Liew k. M., 2001, Active control of FGM plates with integrated piezoelectric sensors and actuators , International Journal of Solids and Structures 38:1641-1655.
[18] Wu X. H., Shen Y. P., Chen C., 2003 , An exact solution for functionally graded piezothermoelastic cylindrical shell as sensors or actuators, Materials Letters 57:3532-3542.
[19] Fesharaki J. J., Fesharaki J. V., Yazdipoor M., Razavian B., 2012, Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder, Applied Mathematical Modeling 36:5521-5533.
[20] Eslami M.R., Babaei M.H., Poultangari R., 205, Thermal and mechanical stresses in a functionally graded thick sphere, International Journal Pressure Vessels and Piping 82: 522-527.
[21] Dai H.L., Fu Y. M. , 2007, Magnetothermoelastic interactions in hollow structures of functionally graded material subjected to mechanical loads, International Journal Pressure Vessels and Piping 84:132-138.
[22] Yas M.H., SobhaniAragh B., 2010, Three-dimensional analysis for thermoelastic response of functionally graded fiber reinforced cylindrical panel, Composite Structures 92: 2391-2399.
[23] Peng X.L., Li X.F., 2010, Thermal stress in rotating functionally graded hollow circular disks, Composite Structures 92:1896-1904.
[24] Asghari M., Ghafoori E., 2010, A three-dimensional elasticity solution for functionally graded rotating disks, Composite Structures 92:1092-1099.
[25] Khoshgoftar M.J., Ghorbanpour Arani A., Arefi M., 2009, Thermoelastic analysis of a thick walled cylinder made of functionally graded piezoelectric material, Smart Materials and Structures 18:115007.
[26] Dube G.P., Kapuria S., Dumir G.P., 1996, Exact piezothermoelastic solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending, Archive of Applied Mechanics 66: 537-554.
[27] Dumir P.C., Dube G.P., Kapuria S., 1997, Exact piezoelectric solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending, International Journal of Solids and Structures 34: 685-702.
[28] Alashti A.R., Khorsand M., 2011, Three-dimensional thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by differential quadrature method , International Journal Pressure Vessels and Piping 88:167-180.
[29] Heyliger P., 1997, A note on the static behavior of simply-supported laminated piezoelectric cylinders, International Journal of Solids and Structures 34:3781-3794.
[30] Chen C.Q., Shen Y.P., 1996, Piezothermoelasticity analysis for a circular cylindrical shell under the state of axisymmetric deformation, International Journal of Engineering Science 34:1585-1600.
[31] Shakeri M., Saviz M.R., Yas M.H., 2006, Elasticity solution of laminated cylindrical shell with piezoelectric actuator and sensor layer, Proceedings of the Eighth International Conference on Computational Structures Technology, Spain.
[32] Shao Z.S. , Fan L.F., Wang T.J., 2004, Analytical solutions of stresses in functionally graded circular hollow cylinder with finite length, Key Engineering Materials 261-263: 651-656.
[33] Ootao Y., Tanigawa Y., 2005, Two-dimensional thermoelastic problem of functionally graded cylindrical panel due to nonuniform heat supply, Mechanics Research Communications 32:429-443.
[34] Tutuncu N., 2007, Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures 29:2032-2035.
[35] Shao Z.S., Ma G.W., 2008, Thermo-mechanical stresses in functionally graded circular hollow cylinder with linearly increasing boundary temperature, Composite Structures 83:259-265.
[36] Obata Y., Noda N.,1994, Steady thermal stresses in a hollow circular cylinder and a hollow sphere of a functionally graded material, Journal of Thermal Stresses 14:471-487.
[37] Shao Z.S., 2005, Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length, International Journal Pressure Vessels and Piping 82:155-163.
[38] Alibeigloo A., 2010, Thermoelastic solution for static deformations of functionally graded cylindrical shell bonded to thin piezoelectric layers, Composite Structures 93:961-972.
[39] Jabbari M., Mohazzab A.H., Bahtui A., 2009, One-dimensional moving heat sourc in a hollow FGM cylinder, International Journal Pressure Vessels Technology 131:021202-021209.
