Asymmetric Thermal Stresses of Hollow FGM Cylinders with Piezoelectric Internal and External Layers
الموضوعات :
1 - Postgraduate School, Islamic Azad University, South Tehran Branch
2 - Postgraduate School, Islamic Azad University, South Tehran Branch
الکلمات المفتاحية: Piezoelectric, FGM, Hollow cylinder, Asymmetric,
ملخص المقالة :
In this paper ,the general solution of steady-state one dimensional asymmetric thermal stresses and electrical and mechanical displacements of a hollow cylinder made of functionally graded material and piezoelectric layers is developed .The material properties ,except the Poisson's ration, are assumed to depend on the variable radius and they are expressed as power functions of radius. The temperature distribution is assumed to be a function of radius with general thermal and mechanical boundary conditions on the inside and outside surfaces. By using the separation of variables method and complex Fourier series, the Navier equations in term of displacements are derived and solved.
[1] Wu C. P., Syu Y. S., 2007, Exact solutions of functionally graded piezoelectric shells under cylindrical bending, International Journal of Solids and Structures 44: 6450-6472.
[2] Wang H.M., Xu Z.X. , 2010, Effect of material inhomogeneity on electromechanical behaviors of functionally graded piezoelectric spherical structures, Computational Materials Science 48: 440-445.
[3] Li X.Y., Ding H.J., Chen W.Q., 2008, Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk, International Journal of Solids and Structures 45:191-210.
[4] Tiersten HF., 1969, Linear Piezoelectric Plate Vibrations, New York, Plenum Press.
[5] Kapuria S., Dumir PC., Sengupta S., 1996, Exact piezothermoelastic axisymmetric solution of a finite transversely isotropic cylindrical shell, Computers & Structures 61:1085-1099.
[6] Lutz M.P., Zimmerman R.W., 1996, Thermal stresses and effective thermal expansion coefficient of functionally graded sphere, Journal of Thermal Stresses 19: 39-54.
[7] Zimmerman R.W., Lutz M.P., 1999, Thermal stresses and thermal expansion in a uniformly heated functionally graded cylinder, Journal of Thermal Stresses 22:177-188.
[8] Jabbari M., Sohrabpour S., Eslami M.R., 2003, General solution for mechanical and thermal stresses in functionally graded hollow cylinder due to radially symmetric loads, Journal of Applied Mechanics 70:111-118.
[9] Jabbari M., Sohrabpour S., Eslami M.R., 2002, Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads, International Journal Pressure Vessels and Piping 79: 493-497.
[10] Jabbari M., Bahtui A., Ealami M.R., 2009, Axisymmetric mechanical and thermal stresses in thick short length functionally graded material cylinder, International Journal Pressure Vessels and Piping 86: 296-306.
[11] Jabbari M., Meshkini M., Ealami M.R., 2012, Nonaxisymmetric mechanical and thermal stresses in functionally graded porous piezoelectric material hollow cylinder, International Journal Pressure Vessels Technology 134:061212-061237.
[12] Poultangari R., Jabbari M., Eslami M.R., 2008, Functionally graded hollow spheres under non-axisymmetric thermo-mechanical loads, International Journal Pressure Vessels and Piping 85: 295-305.
[13] Ootao Y., Tanigawa Y., 2004, Transient thermoelastic problem of functionally graded thick strip due to non uniform heat supply, Composite Structures 63(2):139-146.
[14] Alibeigloo A., Chen W.Q., 2010, Elasticity solution for an FGM cylindrical panel integrated with piezoelectric layers, European Journal of Mechanics - A/Solids 29: 714-723.
[15] Dai H. L., Hong L., Fu Y. M., Xiao X., 2010, Analytical solution for electro magnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder, Applied Mathematical Modeling 34: 343-357.
[16] Chen W. Q., Bian Z, G., Lv C.F., Ding H.J., 2004, 3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid, International Journal of Solids and Structures 41: 947-964.
[17] He X. Q., Ng T.Y., Sivashanker S., Liew k. M., 2001, Active control of FGM plates with integrated piezoelectric sensors and actuators , International Journal of Solids and Structures 38:1641-1655.
[18] Wu X. H., Shen Y. P., Chen C., 2003 , An exact solution for functionally graded piezothermoelastic cylindrical shell as sensors or actuators, Materials Letters 57:3532-3542.
[19] Fesharaki J. J., Fesharaki J. V., Yazdipoor M., Razavian B., 2012, Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder, Applied Mathematical Modeling 36:5521-5533.
[20] Eslami M.R., Babaei M.H., Poultangari R., 205, Thermal and mechanical stresses in a functionally graded thick sphere, International Journal Pressure Vessels and Piping 82: 522-527.
[21] Dai H.L., Fu Y. M. , 2007, Magnetothermoelastic interactions in hollow structures of functionally graded material subjected to mechanical loads, International Journal Pressure Vessels and Piping 84:132-138.
[22] Yas M.H., SobhaniAragh B., 2010, Three-dimensional analysis for thermoelastic response of functionally graded fiber reinforced cylindrical panel, Composite Structures 92: 2391-2399.
[23] Peng X.L., Li X.F., 2010, Thermal stress in rotating functionally graded hollow circular disks, Composite Structures 92:1896-1904.
[24] Asghari M., Ghafoori E., 2010, A three-dimensional elasticity solution for functionally graded rotating disks, Composite Structures 92:1092-1099.
[25] Khoshgoftar M.J., Ghorbanpour Arani A., Arefi M., 2009, Thermoelastic analysis of a thick walled cylinder made of functionally graded piezoelectric material, Smart Materials and Structures 18:115007.
[26] Dube G.P., Kapuria S., Dumir G.P., 1996, Exact piezothermoelastic solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending, Archive of Applied Mechanics 66: 537-554.
[27] Dumir P.C., Dube G.P., Kapuria S., 1997, Exact piezoelectric solution of simply-supported orthotropic circular cylindrical panel in cylindrical bending, International Journal of Solids and Structures 34: 685-702.
[28] Alashti A.R., Khorsand M., 2011, Three-dimensional thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by differential quadrature method , International Journal Pressure Vessels and Piping 88:167-180.
[29] Heyliger P., 1997, A note on the static behavior of simply-supported laminated piezoelectric cylinders, International Journal of Solids and Structures 34:3781-3794.
[30] Chen C.Q., Shen Y.P., 1996, Piezothermoelasticity analysis for a circular cylindrical shell under the state of axisymmetric deformation, International Journal of Engineering Science 34:1585-1600.
[31] Shakeri M., Saviz M.R., Yas M.H., 2006, Elasticity solution of laminated cylindrical shell with piezoelectric actuator and sensor layer, Proceedings of the Eighth International Conference on Computational Structures Technology, Spain.
[32] Shao Z.S. , Fan L.F., Wang T.J., 2004, Analytical solutions of stresses in functionally graded circular hollow cylinder with finite length, Key Engineering Materials 261-263: 651-656.
[33] Ootao Y., Tanigawa Y., 2005, Two-dimensional thermoelastic problem of functionally graded cylindrical panel due to nonuniform heat supply, Mechanics Research Communications 32:429-443.
[34] Tutuncu N., 2007, Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures 29:2032-2035.
[35] Shao Z.S., Ma G.W., 2008, Thermo-mechanical stresses in functionally graded circular hollow cylinder with linearly increasing boundary temperature, Composite Structures 83:259-265.
[36] Obata Y., Noda N.,1994, Steady thermal stresses in a hollow circular cylinder and a hollow sphere of a functionally graded material, Journal of Thermal Stresses 14:471-487.
[37] Shao Z.S., 2005, Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length, International Journal Pressure Vessels and Piping 82:155-163.
[38] Alibeigloo A., 2010, Thermoelastic solution for static deformations of functionally graded cylindrical shell bonded to thin piezoelectric layers, Composite Structures 93:961-972.
[39] Jabbari M., Mohazzab A.H., Bahtui A., 2009, One-dimensional moving heat sourc in a hollow FGM cylinder, International Journal Pressure Vessels Technology 131:021202-021209.
