Design of 0.4 V operational amplifier using low-power techniques
Subject Areas : Majlesi Journal of Telecommunication DevicesSaber Izadpanah tous 1 , Mahmoud Behroozi 2 , Vahid Asadpoor 3
1 - Sadjad Institute for Higher Education
2 - Sadjad Institute for Higher Education
3 -
Keywords:
Abstract :
[1] F. Assaderaghi, D. Sinitsky, S. Parke, J. Bokor, P. K. Ko, and C. Hu, “A dynamic threshold voltage MOSFET (DTMOS) for ultra-low voltage operation,” International Electron Devices Meeting, Technical Digest, pp. 809–812, 1994.
[2] F. Assaderaghi, D. Sinitsky, S. Parke, J. Bokor, P.K. Ko, Hu. Chenming, “Dynamic Threshold-Voltage MOSFET (DTMOS) for Ultra-Low Voltage VLSI,” IEEE Transaction on Electron Device, Vol. 44, No. 3, pp. 414-422, 1997.
[3] F. Assaderaghi, “DTMOS: Its derivatives and variations, and their potential applications,” International Conference on Microelectronic, pp. 9–10, 2000.
[4] H.F. Achigui, C.J.B. Fayomi, M. Sawan “A DTMOS-based 1 V op amp,” IEEE International Conference on Electronics, Circuits and systems , Vol. 1, pp. 252–255, 2003.
[5] H.F. Achigui, C.J.B. Fayomi, M. Sawan “A 1 V Low-Power Low-Noise DTMOS Based Class AB Op amp,” IEEE-NEWCAS, pp. 307–310, 2005.
[6] H.F. Achigui, C.J.B. Fayomi, and M. Sawan, “1 V DTMOS based class AB operational amplifier: Implementation and experimental results,” IEEE Journal of Solid-State Circuits, Vol. 41, No. 11, 2006.
[7] H.F. Achigui, M. Sawan, C.J.B. Fayomi, “A 1 V Fully Differential, Fully Balanced Op amp: Implementation and Experimental Results,” Analog Integrated Circuits and Signal Processing, Vol. 53, No. 1, pp.19-25, 2007.
[8] E. Kargaran, M. Sawan, Kh. Mafinezhad, H. Nabovati, “Design of 0.4V, 386nW OTA Using DTMOS Technique for Biomedical Applications,” 55th IEEE International Midwest Symposium on Circuits and Systems, pp. 270–273, 2012.
[9] A. suadet, T. Thongleam, A. Kanjanop, P. Singhanath, B. Hirunsing, W. Chuenta, V. Kasemsuwan, “A 0.8 V class-AB linear OTA using DTMOS for high-frequency applications,” 4th International Conference on Modeling, Simulation and Applied Optimization, pp. 1-5, 2011.
[10] ZhiYuan Li, MingYan Yu, JianGuo Ma, “A Novel Input Stage Based on DTMOS for Low-Voltage Low-Noise Operational Amplifier” APCCAS, pp. 1591-1594, 2006.
[11] M.Razzaghpour, A.Golmakani, “An Ultra-Low-Voltage Ultra-Low-Power OTA with Improved Gain-Bandwidth Product,” in proc. IEEE ICM, 2008.
[12] Sheng-Wen Pan, Chiung-Cheng Chuang, Chung-Huang Yang, Yu-Sheng Lai, “A Novel OTA with Dual Bulk- Driven Input Stage,” IEEE International Symposium on Circuits and Systems, pp. 2721-2724, May 2009.
[13] S. Sbaraini, A. Richelli and Zs.M. Kovacs-Vajna, “EMI susceptibility in bulk-driven Miller opamp,” Electronics Letters, Vol. 46, No. 16, August 2010.
[14] B. Razavi, Design of Analog CMOS Integrated Circuits. New York, NY: McGraw-Hill, 2001.
[15] S. Voldman, D. Hui, D. Young, R. Williams, D. Dreps, J. Howard, M. Sherony, F. Assaderaghi, G. Shahidi, “Silicon-on-insulator dynamic threshold ESD networks and active clamp circuitry”, Electrical Overstress/Electrostatic Discharge Symposium, pp. 29-40, 2000.
[16] A. Guzinski, M. Bialko, and J. C. Matheau, “Body-Driven Differential Amplifier for Application in Countinous-Time Active-C Filter,” Proceedings of the European Conference on Circuit Theory and Design, pp. 315-319, June 1987.
[17] Zuo, Liang, "Low-Voltage Bulk-Driven Amplifier Design and Its Application in Implantable Biomedical Sensors," PhD diss., University of Tennessee, 2012.
[18] G. Raikos, S. Vlassis, “0.8 V bulk-driven operational amplifier,” Analog Integrated Circuits and Signal Processing, Vol.63, No. 3, pp. 425-432, 2010.