Theoretical Predictions on Mechanical Properties of Functionally Graded Epoxy/Clay Nanocomposites
Subject Areas : Mechanical Engineering
1 - Department of Mechanical Engineering, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran
Keywords:
Abstract :
[1] Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., and Kamagatio, O., Synthesis of Nylon 6-Clay Hybrid by Montmorillonite Intercalated with Caprolactam, Journal of Polymer Science Part A, Vol. 8, No. 4, 1993, pp. 983-986, 10.1002/pola.1993.080310418.
[2] Miyagawa, H., Drzal, L. T., Thermo-Physical and Impact Properties of Epoxy Nanocomposites Reinforced by Single-Wall Carbon Nanotubes, Polymer, Vol. 45, No.15, 2004, pp. 5163–5170, 10.1016/j.polymer.2004.05.036.
[3] Mahajan, D., Desai, A., Rafailovich, M., Cui, M. H., and Yang, N. L., Synthesis and Characterization of Nanosized Metal Embedded in Polystyrene Matrix, Composites Part B, Vol. 37, No. 1, 2006, pp. 74–80, 10.1016/j.compositesb.2004.12.005.
[4] Gojny, F. H., Wichmann, M. H. G, Kopke, U., Fiedler, B., and Schulte, K., Carbon Nanotube-Reinforced Epoxy-Composites: Enhanced Stiffness and Fracture Toughness at Low Nanotube Content, Composites Science and Technology, Vol. 64, No. 15, 2004, pp. 2363–2371, 10.1016/j.compscitech.2004.04.002.
[5] Lau, K. T., Lu, M., Li, H. L., Zhou, L. M., and Hui, D., Heat Absorbability of Single-Walled, Coiled and Bamboo Nanotube/Epoxy Nanocomposites, Journal of Material Science, Vol. 39, No. 18, 2004, pp. 5861–5863, 10.1023/B:JMSC.0000040103.42161.ed.
[6] Park, J. H., Jana, S. C., The Relationship Between Nano- and Microstructures and Mechanical Properties in PMMA–Epoxy–Nanoclay Composites, Polymer, Vol. 44, No. 7, 2003, pp. 2091–2100, 10.1016/S0032-3861(03)00075-2.
[7]Ray, S. S., Okamoto, M., Polymer/Layered Silicate Nano -composites: A Review from Preparation to Processing, Progress in Polymer Science, Vol. 28, No. 11, 2003, pp. 1539–1641, 10.1016/j.progpolymsci.2003.08.002.
[8] Zhou, Y., Pervin, F., Biswas, M. A., Rangari, V. K., and Jeelani, S., Fabrication and Characterization of Montmorillonite Clay-filled SC-15 Epoxy, Materials Letters, Vol. 60, No. 7, 2006, pp. 869–873, 10.1016/j.matlet.2005.10.042.
[9] Lau, K. T., Lu, M., and Hui, D., Coiled Carbon Nanotubes: Synthesis and Their Potential Application in Advanced Composite Structures, Composites Part B: Engineering, Vol. 37, No. 6, 2006, pp. 437–448, 10.1016/j.compositesb.2006.02.008.
[10] Mortazavi, B., Bardon, J., Bomfim J. S. B., and Ahzi, S., A Statistical Approach for The Evaluation of Mechanical Properties of Silica/Epoxy Nanocomposite: Verification by Experiments, Computational Materials Science, Vol. 59, 2012, pp. 108–113, 10.1016/j.commatsci.2012.03.002.
[11] Wang, Z., Liu, F., Liang, W., and Zhou, L., Nanoscale Analysis of Tensile Properties and Fracture of Nanoreinforced Epoxy Polymer Using Micromechanics, Journal of Reinforced Plastics and Composites, Vol. 32, No. 16, 2013, pp. 1224–1233, 10.1177/0731684413486848.
[12] Wang, J., Liang, G., and Zhu, B., Modification of Cyanate Resin by Nanometer Silica, Journal of Reinforced Plastics and Composites, Vol. 26, No. 4, 2007, pp. 419–429, 10.1177/0731684406072536.
[13] Meybodi, M. H., Saber Samandari, S., and Sadighi, M., A New Approach for Prediction of Elastic Modulus of Polymer/Nanoclay Composites by Considering Interfacial Debonding: Experimental and Numerical Investigations, Composites Science and Technology, Vol. 117, 2015, pp. 379-385, 10.1016/j.compscitech.2015.07.014.
[14] Meybodi, M. H., Saber Samandari, S., Sadighi, M., and Bagheri, M. R., Low-Velocity Impact Response of a Nanocomposite Beam Using an Analytical Model, Latin American Journal of Solids and Structures, Vol. 12, No. 2, 2015, pp. 333-354, 10.1590/1679-78251346.
[15] Ayatollahi, M. R., Barbaz Isfahani, R., and Moghimi Monfared, R., Effects of Multi-Walled Carbon Nanotube and Nanosilica on Tensile Properties of Woven Carbon Fabric-Reinforced Epoxy Composites Fabricated Using VARIM, Journal of Composite Materials, Vol. 51, No. 30, 2017, pp. 4177-4188, 10.1177/0021998317699982.
[16] Goodarz, M., Bahrami, H., Sadighi, M., and Saber-Samandari, S., Quasi-Static Indentation Response of Aramid Fiber/Epoxy Composites Containing Nylon 66 Electrospun Nano-Interlayers, Journal of Industrial Textiles, Vol. 47, No. 5, 2018, pp. 960-977, 10.1177/1528083716679158.
[17] Monfared, R. M., Ayatollahi, M. R., and Isfahani, R. B., Synergistic Effects of Hybrid Mwcnt/Nanosilica on the Tensile and Tribological Properties of Woven Carbon Fabric Epoxy Composites, Theoretical and Applied Fracture Mechanics, Vol. 96, 2018, pp. 272-284, 10.1016/j.tafmec.2018.05.007.
[18] Maghsoudlou, M. A., Isfahani, R. B., Saber Samandari, S., and Sadighi, M., Effect of interphase, Curvature and Agglomeration of Swcnts on Mechanical Properties of Polymer-Based Nanocomposites: Experimental and Numerical Investigations, Composites Part B: Engineering, Vol. 175, 2019, pp. 107-119, 10.1016/j.compositesb.2019.107119.
[19] Holland, J. H., Adaptation in Natural and Artificial Systems, University of Michigan Press, Ann Arbor, Michigan, United State of America, 1975, pp. 28-114.
[20] Yaghoobi, H., Fereidoon, A., Influence of Neutral Surface Position on Deflection of functionally Graded Beam under Uniformly Distributed Load, World Applied Sceince Journal, Vol. 10, No. 3, 2010, pp. 337-341, 10.3923/jas.2010.337.342.
