Elimination of Lead and Cadmium in Water, Using Green Coated Fe3O4 Nanoparticles
Subject Areas : MicrobiologyF. Nematollahi 1 , Sh. Mozaffari 2 , F. Zmani Hargalani 3 , M. Zeinali 4
1 - Assistant Professor of the Department of Chemistry, East Tehran Branch, Islamic Azad University, Tehran, Iran.
2 - Assistant Professor of the Department of Chemistry, Payam Nor University, Tehran, Iran.
3 - Assistant Professor of the Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran.
4 - Assistant Professor of the Department of Chemistry, Payam Nor University, Tehran, Iran.
Keywords: Green Chemistry, Heavy Metals, Magnetic Iron Nanoparticles, Polylophium Involucratum, Water pollution,
Abstract :
Introduction: Various absorbents have been studied for removing heavy metals from water. One of the most effective removals is iron oxide nanoparticles. In recent years many studies have been carried out for modifying the surface of the nanoparticles and increasing its effectiveness and efficiency. Materials and Methods: In this paper coated iron oxide nanoparticles were prepared using Polylophium involucratum extract. To examine the structure of the absorbent the infrared spectrometer instrument and SEM were used to check the size of nanoparticles. the average size of them were determined 60 nm. Results: The synthesized coated nanoparticles were used to eliminate lead and cadmium after optimization conditions (pH of 6, absorbent weight of 20 mg, and time of 4 minutes) in water samples. Magnetic green coated nanoparticles have many advantages such as non-toxicity, biocompatibility, shorter extraction time, avoiding the use of organic solvents, low cost, ease of use, high accuracy, recovery and adsorption capacity due to the nanostructure and high ratio of surface to volume. Conclusion: Functionalized nanoparticles by extract of the plant is able to link up with heavy metal ions and increase the efficiency of the nanoparticles in the removal of these two heavy metals.
Babel, S. & Kurniawan, T. A. (2003). Low-cost Adsorbents for Heavy Metals Uptake from Contaminated Water: a Review, Journal of Hazardous Material, 97, 219–243
Bai, H., Zhou, Q., Xie, G. & Xiao, J. (2010). Temperature-controlled ionic liquid–liquid-phasemicroextraction for the pre-concentration of lead from environmental samples priortoflameatomic absorption spectrometry, Talanta, 80, 1638–1642.
Bailey, S. E., Olin, T. J., Bricka, R. M. & Adrian, D. D. (1999). A Review of Potentially Low-Cost Sorbents for Heavy Metals, Water
Res., 33, 2469–2479.
Bowker, M. (2005). A Propective: Surface Science and Catalysis at the Nanoscale, Surf. Sci., 603, 2359-2362.
Dabrowski, A., Hubicki, Z., Podkoscielny, P. & Robens, E. (2004). Selective Removal of The Heavy Metal Ions from Waters and Industrial Wastewaters by Ion-Exchange Method, Chemosphere., 56, 91–106.
Faraji, M., Yamini Y., Saleh, A., Rezaee, M., Ghambarian, M. & Hassani, R. )2010(. Nanoparticlebased solid-phase extraction procedure followed by flow injection inductively coupled plasma-optical emission spectrometry to determine some heavy metal ions in water samples, Anal. Chim. Acta, 659, 172–177.
Ge, F., Li, M., Hui, Y. & Zhao, B. X. (2012). Effective removal of heavy metal ions Cd2+, Zn2+, Pb2+, Cu2+ from aqueous solution by polymer-modified magnetic nanoparticles, J. Hazard., 211-212, 366-372.
Giannazzo, F. (2011). Advanced Materials Nanocharacterization, Nanoscale Res. Lett., 6, 107-108.
Grimm, J., Bessarabov, D. & Sanderson, R. (1998). Review of Electro-Assisted Methods for Water Purification, Desalination, 115, 285–294.
Liu, X., Hu, Q., Fang, Z., Zhang, X. & Zhang, B. (2007). Magnetic chitosan nanocomposites a useful recyclable tool for heavy metal ion removal, Colloids and Surfaces B: Biointerfaces, 58, 3-7.
Macanas, J. (2011). Ion-exchange Assisted Synthesis of Polymer- Stabilized Metal Nanoparticles, Solvent Extraction and Ion Exchange, A Series of Advances, Tailor and Francis, Chap. 1, 20.
Mahdavi, M., Namvar, F., Bin Ahmad, M. & Mohamad, R. (2013). Green Biosynthesis and Characterization of Magnetic Iron Oxide (Fe3O4) Nanoparticles Using Seaweed (Sargassum muticum) Aqueous Extract, Molecules, 18, 5954-5964
Ritchie, S. M. C. & Bhattacharyya, D. (2002). Membrane-Based Hybrid Processes for High Water Recovery and Selective Inorganic Pollutant Separation, J. Hazard. Mater, 92, 21.
Wang, L., Jianchen Li, J., Jianga, Q. &
Zhao, L. (2012). Water-soluble Fe3O4 nanoparticles with high solubility for removal of heavy-metal ions from waste water, Dalton Trans., 41, 4544-4552.
Willner, E. & Katz, E. (2003). Magnetic Control of Electrocatalytic and Bioelectrocatalytic Processes, Chem. Int. Ed., 42, 4576–4588.
Zhang, M., Zhang, Zh., Liu, Y., Yang, X., Luo, L., Chen, J. & Yao, Sh. (2011). Preparation of coreshell magnetic ion-imprinted polymer for selective extraction of Pb (II) from environmental samples, Chem. Engineering J., 178, 443-450.
