• Home
  • Investigating the Behavior of MG63 Cells on Polycaprolactone and Polycaprolactone/Collagen 3D Scaffolds for Bone Regeneration

Share To

Article Url


Manuscript ID : ASCIJ-2302-1470 (R1) Visit : 208 Page: 113 - 130

10.22034/ascij.2023.1980337.1470

Article Type: Original Research

Investigating the Behavior of MG63 Cells on Polycaprolactone and Polycaprolactone/Collagen 3D Scaffolds for Bone Regeneration

Subject Areas : Journal of Animal Biology

Zahra Ebrahimi 1 , Shiva Irani 2 , Abdolreza Ardeshirylajimi 3 , Ehsan Seyedjafari 4

1 - Department of Biology, School of Basic Science, Science and Research Branch, Islamic Azad University, Tehran, Iran.
2 - Department of Biology, School of Basic Science, Science and Research Branch, Islamic Azad University, Tehran, Iran.
3 - Urogenital Stem Cell Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
4 - Department of Biotechnology, College of Science, University of Tehran, Tehran, Iran.

Received: 2023-01-16 Accepted : 2023-03-15 Published : 2023-11-22

Keywords: Collagen, stem cells, Bone tissue engineering, Polycaprolactone, 3D printing scaffolds,

Abstract :

3D printing of scaffolds at low temperatures is very promising for making artificial bone graft alternatives with more performance than traditional techniques. One of the most promising strategies in bone tissue engineering has focused on the development of biomimetic scaffolds. Ceramic-based scaffolds with osteogenic ability and mechanical properties are promising candidates for bone repair. The aim of this study was to adapt the flexibility and increasing the effect of inducing osteogenesis of Polycaprolactone (PCL) scaffold prepared by fused deposition modeling (FDM) method, using the combination of Collagen (COL) as a natural polymer with synthetic polymer and to investigate the behavior of MG63 cells on it. on it. After preparing the scaffold, scanning electron microscope (SEM), energy dispersive X-ray (EDX) and ATR-FTIR spectroscopy were used. After 1,7,14 days, the ossification process of MG63 cells in different treatments was performed using alizarin red staining and alkaline phosphatase activity. The non-toxicity of scaffolds was also evaluated by MTT assay to ensure cell proliferation. From under a microscope, it was found that tissue engineering scaffolds distributed and connected almost rectangular pores evenly. The PCL/COL scaffold showed a significant difference in terms of viability compared to the polycaprolactone scaffold only in the differential medium (P ≤ 0.0001). The results of evaluating ALP activity in PCL/COL scaffolds were significantly higher than uncoated PCL scaffolds and control (P ≤ 0.0001). The results of this study showed that the use of PCL/COL scaffold can be considered a suitable medium for proliferation and differentiation of MG63 cells in bone tissue engineering. Therefore, the PCL/COL composite scaffold prepared by FDM printer can be widely used in bone tissue engineering due to the cell survival by COL.

References:


  1. Abdal-hay A., Raveendran N. T., Fournier B., Ivanovski S. 2020. Fabrication of biocompatible and bioabsorbable polycaprolactone/magnesium hydroxide 3D printed scaffolds: Degradation and in vitro osteoblasts interactions. Composites Part B: Engineering, 197, 108158.
    2.
  2. Abnosi M and Dehdehi L. 2012. Study of morphology and biochemistry of rat bone marrow mesenchymal stem cells before and after osteogenic differentiation: a comparative study. of Cell and Tissue, Vol. 3, pp. 103-111.
    3.
  3. Alksne M., Kalvaityte M., Simoliunas E., Rinkunaite I., Gendviliene I., Locs J., Rutkunas V., Bukelskiene V. 2020. In vitro comparison of 3D printed polylactic acid/hydroxyapatite and polylactic acid/bioglass composite scaffolds: Insights into materials for bone regeneration. J Mech Behav Biomed Mater, https://doi.org/10.1016/j.jmbbm.2020.103641
    4.
  4. Amiruddin H., Bin Abdollah M.F., Norashid N.A. 2019. Comparative study of the tribological behaviour of 3d-printed and moulded abs under lubricated condition, Res. Express, 6. 085328.
    5.
  5. Arab‐Ahmadi S., Irani S., Bakhshi H., Atyabi F., Ghalandari B. 2021. Immobilization of carboxymethyl chitosan/laponite on polycaprolactone nanofibers as osteoinductive bone scaffolds. Polymers for Advanced Technologies, 32(2), 755-765.
    6.
  6. Black CR., Goriainov V., Gibbs D., Kanczler J., Tare RS., Oreffo RO. 2015. Bone tissue engineering. Current molecular biology reports, 1(3):132-40.
    7.
  7. Bishop ES., Mostafa S., Pakvasa M., Luu HH., Lee MJ., Wolf JM., et al. 2017. 3-D bioprinting technologies in tissue engineering and regenerative medicine: Current and future trends. Genes & diseases, 4(4):185-95.
    8.
  8. Caetano, Guilherme Ferreira, Bártolo, Paulo Jorge, Domingos, Marco, Oliveira, Carolina Caliari, Leite, Marcel Nani, & Frade, Marco Andrey Cipriani. (2015). Osteogenic Differentiation of Adipose-derived Mesenchymal Stem Cells into Polycaprolactone (PCL) Scaffold. Procedia Engineering, 110, 59-66.
    9.
  9. Chocholata P., Kulda V., and Babuska V. 2019. Fabrication of Scaffolds for Bone-Tissue Regeneration. Materials, 12(4): p. 568.
    10.
  10. Colazo JM., Evans BC., Farinas AF., Al-Kassis S., Duvall CL., Thayer WP. 2019. Applied Bioengineering in Tissue Reconstruction, Replacement, and Regeneration. Tissue Engineering Part B: Reviews, 25(4):259-90.
    11.
  11. Dong Ch and Lv Y. 2016. Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives. Polymers.
    12.
  12. Du X, Fu S, Zhu Y. 2018. 3D printing of ceramic-based scaffolds for bone tissue engineering: an overview. Journal of Materials Chemistry B, 4397-412:(27)6.
    13.
  13. Gandhimathi Ch., Jie Quek Y., Ezhilarasu H., Ramakrishna S., Bay B-H., and Srinivasan D.K. 2019. Osteogenic Differentiation of Mesenchymal Stem Cells with Silica-Coated Gold Nanoparticles for Bone Tissue Engineering. J. Mol. Sci, 20, 5135.
    14.
  14. Gerdes S., Mostafavi A., Ramesh S. 2019. Process‐Structure‐Quality Relationships of 3D Printed PCL‐Hydroxyapatite Scaffolds. Tissue Eng Part A. 26(5-6):279-291.
    15.
  15. Gregory C. A., Gunn W. G., Peister A., and Prockop D. J. 2004. An Alizarin red-based assay of mineralization by adherent cells in culture: comparison with cetylpyridinium chloride extraction. Analytical biochemistry, Vol. 329, pp. 77-84.
    16.
  16. Gómez-Cerezo N., Casarrubios L., Saiz-Pardo M., Ortega L., De Pablo D., Díaz-Güemes I., Portolés M. 2019. Mesoporous bioactive glass/ɛ-polycaprolactone scaffolds promote bone regeneration in osteoporotic sheep. Acta Biomaterialia, 90, 393-402.
    17.
  17. Haleem A., Javaid M., Khan RH., Suman R. 2020. 3D printing applications in bone tissue engineering. Journal of Clinical Orthopaedics and Trauma, 11: S118-S24.
    18.
  18. He Y., Liu W., Guan L., Chen J., Duan L., Jia Z., et al. 2018. A 3D-printed PLCL scaffold coated with collagen type I and its biocompatibility. BioMed research international, 10,
    19.
  19. Jammalamadaka U., Tappa K. 2018. Recent advances in biomaterials for 3D printing and tissue engineering. Journal of functional biomaterials, 9(1):22.
    20.
  20. Jia L., Zhang Y., Ji Y., Li X., Xing Y., Wen Y., et al. 2019. Comparative analysis of lncRNA and mRNA expression profiles between periodontal ligament stem cells and gingival mesenchymal stem cells. Gene, 699:155-64.
    21.
  21. Jaroszewicz J., Idaszek J., Choinska E., Szlazak K., Hyc H., Osiecka-Iwan A., Swieszkowski W and Moskalewski S. 2019. “Formation of calcium phosphate coatings within polycaprolactone scaffolds by simple, alkaline phosphatase based method”. Materials Science and Engineering, C, Vol. 96, pp. 319-328.
    22.
  22. Khosravi A., Ghasemi-Mobarakeh L., Mollahosseini H., AjalloueianF., Masoudi Rad M., Norouzi M.R., Sami Jokandan M., Khoddami A., Chronakis L.S. 2018. Immobilization of silk fibroin on the surface of PCL nanofibrous scaffolds for tissue engineering applications. Applied polymer.
    23.
  23. Klimek K and Ginalska G. 2020. Proteins and Peptides as Important Modifiers of the Polymer Sca_olds for Tissue Engineering Applications—A Review. Polymers.
    24.
  24. Klippstein H., Sanchez A.D.D., Hassanin H., Zweiri Y., Seneviratne L. 2018. Fused deposition modeling for unmanned aerial vehicles (UAVS): a review, Eng. Mater, 20. 1700552.
    25.
  25. Krithica N., Natarajan V., Madhan B., Sehgal PK., Mandal AB. 2011. Type I Collagen Immobilized Poly(caprolactone) Nanofibers: Characterization of Surface Modification and Growth of Fibroblasts., Advance biomaterial., 14, No. 4.
    26.
  26. Li Q., Lei X., Wang X., Cai Z., Lyu P., Zhang, G. 2019. Hydroxyapatite/collagen three-dimensional printed scaffolds and their osteogenic effects on human bone marrow-derived mesenchymal stem cells. Tissue Engineering Part A, 25(17-18), 1261-1271.
    27.
  27. Ligon S.C., Liska R., Stampfl J., Gurr M., Mulhaupt R. 2017. Polymers for 3d printing and customized additive manufacturing, Rev, 117. 10212–10290.
    28.
  28. Liu Z., Tang Y., Kang T., Rao M., Li K., Wang Q., Quan C., Zhang C., Jiang Q., and Shen H. 2015. Synergistic effect of HA and BMP-2 mimicking peptide on the bioactivity of HA/PMMA bone cement, Colloids and Surfaces B: Biointerfaces, Vol. 131, pp. 39-46.
    29.
  29. Luo Z.; Yang Y.; Deng Y.; Sun Y.; Yang H.; Wei S. 2016. Peptide-incorporated 3D porous alginate scaffolds with enhanced osteogenesis for bone tissue engineering. Colloids Surf. B Biointerfaces, 143, 243–251.
    30.
  30. Ma H., Feng C., Chang J., Wu C. 2018. 3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy. Acta biomaterialia, 79:37-59.
    31.
  31. Masuda H.T., Ishihara S., Harada I., Mizutani T., Ishikawa M., Kawabata K., et al. 2014. Coating extracellular matrix proteins on a (3-aminopropyl) triethoxysilanetreated glass substrate for improved cell culture. Biotechniques. 56(4):172–9.
    32.
  32. Neumann R., Neunzehn J., Hinüber C., Flath T., Schulze F. P., Wiesmann H-P. 2019. 3D-printed poly-ε-caprolactone-CaCO3-biocompositescaffolds for hard tissue regeneration. eXPRESS Polymer Letters, Vol.13, No.1. 2–17.
    33.
  33. Neves MI., Wechsler ME., Gomes ME., Reis RL., Granja PL., Peppas NA. 2017. Molecularly imprinted intelligent scaffolds for tissue engineering applications. Tissue Engineering Part B: Reviews. 23(1):27-43.
    34.
  34. Oh G.W., Nguyen V.T., Heo S.Y., Ko S.C., Kim C.S., et al. 2021. 3D PCL/fish collagen composite scaffolds incorporating osteogenic abalone protein hydrolysates for bone regeneration application: in vitro and in vivo studies. Journal of Biomaterials Science, Polymer Edition, 32(3), 355-371.
    35.
  35. Orafa Z., Irani S., Zamanian, A., Bakhshi H., Nikukar H., et al. 2021. Coating of laponite on PLA nanofibrous for bone tissue engineering application. Macromolecular Research, 29(3), 191-198.
    36.
  36. Patil V. A., Masters K. S. 2020. Engineered collagen matrices. Bioengineering, 7(4), 163.
    37.
  37. Pérez-Castrillo S., González-Fernández M.L., López-González M.E., Villar-Suárez V. 2018. “Effect of ascorbic and chondrogenic derived decellularized extracellular matrix from mesenchymal stem cellso n their proliferation, viability and differentiation”, Annals of Anatomy-Anatomischer Anzeiger, Vol. 220, pp. 60-69.
    38.
  38. Pranzo D., Larizza P., Filippini D., Percoco G. 2018. Extrusion-based 3d printing of microfluidic devices for chemical and biomedical applications: a topical review. Micromachines, 9. 374.
    39.
  39. Raghavendran H. R. B., Mohan S., Genasan K., Murali M. R., Naveen S. V., Talebian S., McKean R., and Kamarul T.2016. Synergistic interaction of platelet derived growth factor (PDGF) with the surface of PLLA/Col/HA and PLLA/HA scaffolds produces rapid osteogenic differentiation. Colloids and Surfaces B: Biointerfaces, Vol. 139, pp. 68-78.
    40.
  40. Rane K., Strano M. 2019. A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic part. Manuf, 7. 155–173.
    41.
  41. Rashad A., Mohamed-Ahmed S., Ojansivu M., Berstad K., Yassin M. A., et al. 2018. Coating 3D printed polycaprolactone scaffolds with nanocellulose promotes growth and differentiation of mesenchymal stem cells. Biomacromolecules, 19(11), 4307-4319.
    42.
  42. Rezk A.I., Mousa H.M., Lee J., Park, C. H., Kim, C.S. 2019. Composite PCL/HA/simvastatin electrospun nanofiber coating on biodegradable Mg alloy for orthopedic implant application. Journal of Coatings Technology and Research, 16(2), 477-489.
    43.
  43. Salehi M., Ai J., Lotfi bakhshaiesh N., Irani S., Ebrahimi B.S. 2019. Evaluation of adhession and viability of endometrial stem cells-derived osteoblast-like cells cultured on PLGA/HA scaffold. Journal of Developmental Biology, 11(1):1-14. [In Persian]
    44.
  44. Sharifi F., Atyabi SM., Norouzian D., Zandi M., Irani S., Bakhshi H. 2018. Polycaprolactone/carboxymethyl chitosan nanofibrous scaffolds for bone tissue engineering application. International journal of biological macromolecules, 115:243-8.
    45.
  45. Tao L., Zhonglong L., Ming X., Zezheng Y., Zhiyuan L., Xiaojun Z., Jinwu W. 2017. In vitro and in vivo studies of a gelatin/carboxymethyl chitosan/LAPONITE® composite scaffold for bone tissue engineering. RSC advances, 7(85), 54100-54110.
    46.
  46. Teti A. 1992. Regulation of cellular functions by extracellular matrix. J Am SocNephrol, 2(10 Suppl): S83–7.
    47.
  47. Wang T., Yang X., Qi X and Chaoyin Jiang. 2015. Osteoinduction and proliferation of bone-marrow stromal cells in three-dimensional poly (ε-caprolactone)/ hydroxyapatite/collagen scaffolds. Journal of Translational Medicine, 13:152.
    48.
  48. Weingärtner L., Latorre S. H., Velten D., Bernstein A., Schmal H., Seidenstuecker M. 2021. The effect of collagen-i coatings of 3D printed pcl scaffolds for bone replacement on three different cell types. Applied Sciences, 11(22), 11063.
    49.
  49. Zaminy A., Ragerdi Kashani I., Barbarestani M., Hedayatpour A., Mahmoudi R., and Vardasbi S. 2008. Melatonin influences the proliferative and differentiative activity of rat adipoe-derived stem cells, Yakhteh, Vol. 10, pp. 25-32.
    50.
  50. Zhang W., Zhu Y., Li J., Guo Q., Peng J., Liu S., et al. 2016. Cell-derived extracellular matrix: basic characteristics and current applications in orthopedic tissue engineering. Tissue Engineering Part B: Reviews, 22(3):193-207.
    51.
  51. Zhang, Q.; Lv, S.; Lu, J.; Jiang, S.; Lin, L. 2015. Characterization of polycaprolactone/collagen fibrous scaffolds by electrospinning and their bioactivity. Int. J. Macromol. 76, 94–101
    52.
  52. Yang W-F., Long L., Wang R., Chen D., Duan S., Xu F-J. 2018. Surface-modified hydroxyapatite nanoparticle-reinforced polylactides for three-dimensional printed bone tissue engineering scaffolds, Biomed. Nanotechnol, 14. 294–303.
    53.
_||_

Sanad

Sanad is a platform for managing Azad University publications

Links

Related Centers

Technical Support

Official pages

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]