EPQ model with inspection of batches and disposal of defective items
Subject Areas : Inventory Management
Eveline Zidan
1
,
Ludmylla Moreira
2
,
Fabíola Oliveira
3
,
Adriana Leiras
4
1 - Industrial Engineering Department, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil.
2 - Industrial Engineering Department, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil.
3 - Industrial Engineering Department, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil.
4 - Industrial Engineering Department, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil
Keywords:
Abstract :
References:
[1] Harris F W. (1913). How Many Parts to Make at Once. Factory, the Magazine of Management 10 (2): 135 – 136, 152.
[2] Taft E W. (1918). The Most Economical Production Lot. Iron Age, 101: 1410–1412.
[3] Pasandideh, S. H. R., Niaki, S. T. A., & Yeganeh, J. A. (2010). A parameter-tuned genetic algorithm for multi-product economic production quantity model with space constraint, discrete delivery orders and shortages. Advances in Engineering Software, 41(2), 306- 314.
[4] Andriolo, A., Battini, D., Grubbström, R. W., Persona, A., & Sgarbossa, F. (2014). A century of evolution from Harris׳ s basic lot size model: Survey and research agenda. International Journal of
Production Economics, 155, 16-38.
Production Economics, 155, 16-38.
[5] Chiarini, A. (2017). An adaptation of the EOQ formula for JIT quasi- pull system production. Production Planning & Control, 28(2), 123-130.
[6] Khan, M., Hussain, M., & Cárdenas-Barrón, L. E. (2017). Learning and screening errors in an EPQ inventory model for supply chains with stochastic lead time demands. International Journal of Production Research, 55(16), 4816-4832.
[7] Huang, Y. F. (2006). An inventory model under two levels of trade credit and limited storage space derived without derivatives. Applied Mathematical Modelling, 30(5), 418-436.
[8] Pasandideh, S. H. R., & Niaki, S. T. A. (2008). A genetic algorithm approach to optimize a multi- products EPQ model with discrete delivery orders and constrained space. Applied Mathematics and Computation, 195(2), 506-514.
[9] Kangi, F., Javanmard, S., & Pasandideh, S. H. R. (2017). Economic production quantity model with imperfect products and random order frequency under due date and limited storage capacity. Journal of Industrial and Production Engineering, 34(5), 344-361.
[10] Chiu, S. W., Wang, S. L., & Chiu, Y. S. P. (2007). Determining the optimal run time for EPQ model with scrap, rework, and stochastic breakdowns. European Journal of Operational Research, 180(2), 664-676.
[11] Li, J., Wang, S., & Cheng, T. E. (2008). Analysis of postponement strategy by EPQ-based models with planned backorders. Omega, 36(5), 777-788.
[12] Zhang, R. Q. (2009). A note on the deterministic EPQ with partial backordering. Omega, 37(5), 1036-1038.
[13] Sarkar, B., & Moon, I. (2011). An EPQ model with inflation in an imperfect production system. Applied Mathematics and Computation, 217(13), 6159-6167.
[14] Chiu, S. W., Chou, C. L., & Wu, W. K. (2013). Optimizing replenishment policy in an EPQ-based inventory model with nonconforming items and breakdown. Economic Modelling, 35, 330-337.
[15] Taleizadeh, A. A., & Pentico, D. W. (2014). An economic order quantity model with partial backordering and all-units discount. International Journal of Production Economics, 155, 172-
184.
[16] Nobil, A. H., Sedigh, A. H. A., & Cárdenas-Barrón, L. E. (2016). A multi-machine multi-product EPQ problem for an imperfect manufacturing system considering utilization and allocation decisions. Expert Systems with Applications, 56, 310-319.
[17] Mokhtari, H., Naimi-Sadigh, A., & Salmasnia, A. (2017). A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand. Scientia Iranica, 24(4), 2138-2151.
[18] Manna, A. K., Das, B., Dey, J. K., & Mondal, S. K. (2018). An EPQ model with promotional demand in random planning horizon: population varying genetic algorithm approach. Journal of Intelligent Manufacturing, 29(7), 1515-1531.
[19] Chang, C. T., Ouyang, L. Y., Teng, J. T., Lai, K. K., & Cárdenas- Barrón, L. E. (2019). Manufacturer's pricing and lot-sizing decisions for perishable goods under various payment terms by a discounted cash flow analysis. International Journal of Production Economics, 218,
83-95.
[20] Gharaei, A., Hoseini Shekarabi, S. A., & Karimi, M. (2020). Modelling and optimal lot-sizing of the replenishments in constrained, multi- product and bi-objective EPQ models with defective products: Generalised cross decomposition. International Journal of Systems Science: Operations & Logistics, 7(3), 262-274.
[21] Salas-Navarro, K., Acevedo-Chedid, J., Árquez, G. M., Florez, W. F., Ospina-Mateus, H., Sana, S. S., & Cárdenas-Barrón, L. E. (2019). An EPQ inventory model considering an imperfect production system with probabilistic demand and collaborative approach. Journal of Advances in Management Research.
[22] Condeixa, L. D., Silva, P., Moah, D., Farias, B., & Leiras, A. (2020). Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations. Central European Journal of Operations Research, 1-20.
[23] Londe, M. A., Martinez, G. C., & Leiras, A. (2020, July). Economic Production Quantity for Products with Deterioration and Shortage Under Advanced-Cash-Credit Payment Scheme. In International Joint conference on Industrial Engineering and Operations Management (pp. 585-597). Springer, Cham.
[9] Kangi, F., Javanmard, S., & Pasandideh, S. H. R. (2017). Economic production quantity model with imperfect products and random order frequency under due date and limited storage capacity. Journal of Industrial and Production Engineering, 34(5), 344-361.
[10] Chiu, S. W., Wang, S. L., & Chiu, Y. S. P. (2007). Determining the optimal run time for EPQ model with scrap, rework, and stochastic breakdowns. European Journal of Operational Research, 180(2), 664-676.
[11] Li, J., Wang, S., & Cheng, T. E. (2008). Analysis of postponement strategy by EPQ-based models with planned backorders. Omega, 36(5), 777-788.
[12] Zhang, R. Q. (2009). A note on the deterministic EPQ with partial backordering. Omega, 37(5), 1036-1038.
[13] Sarkar, B., & Moon, I. (2011). An EPQ model with inflation in an imperfect production system. Applied Mathematics and Computation, 217(13), 6159-6167.
[14] Chiu, S. W., Chou, C. L., & Wu, W. K. (2013). Optimizing replenishment policy in an EPQ-based inventory model with nonconforming items and breakdown. Economic Modelling, 35, 330-337.
[15] Taleizadeh, A. A., & Pentico, D. W. (2014). An economic order quantity model with partial backordering and all-units discount. International Journal of Production Economics, 155, 172-
184.
[16] Nobil, A. H., Sedigh, A. H. A., & Cárdenas-Barrón, L. E. (2016). A multi-machine multi-product EPQ problem for an imperfect manufacturing system considering utilization and allocation decisions. Expert Systems with Applications, 56, 310-319.
[17] Mokhtari, H., Naimi-Sadigh, A., & Salmasnia, A. (2017). A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand. Scientia Iranica, 24(4), 2138-2151.
[18] Manna, A. K., Das, B., Dey, J. K., & Mondal, S. K. (2018). An EPQ model with promotional demand in random planning horizon: population varying genetic algorithm approach. Journal of Intelligent Manufacturing, 29(7), 1515-1531.
[19] Chang, C. T., Ouyang, L. Y., Teng, J. T., Lai, K. K., & Cárdenas- Barrón, L. E. (2019). Manufacturer's pricing and lot-sizing decisions for perishable goods under various payment terms by a discounted cash flow analysis. International Journal of Production Economics, 218,
83-95.
[20] Gharaei, A., Hoseini Shekarabi, S. A., & Karimi, M. (2020). Modelling and optimal lot-sizing of the replenishments in constrained, multi- product and bi-objective EPQ models with defective products: Generalised cross decomposition. International Journal of Systems Science: Operations & Logistics, 7(3), 262-274.
[21] Salas-Navarro, K., Acevedo-Chedid, J., Árquez, G. M., Florez, W. F., Ospina-Mateus, H., Sana, S. S., & Cárdenas-Barrón, L. E. (2019). An EPQ inventory model considering an imperfect production system with probabilistic demand and collaborative approach. Journal of Advances in Management Research.
[22] Condeixa, L. D., Silva, P., Moah, D., Farias, B., & Leiras, A. (2020). Evaluating cost impacts on reverse logistics using an Economic Order Quantity (EOQ) model with environmental and social considerations. Central European Journal of Operations Research, 1-20.
[23] Londe, M. A., Martinez, G. C., & Leiras, A. (2020, July). Economic Production Quantity for Products with Deterioration and Shortage Under Advanced-Cash-Credit Payment Scheme. In International Joint conference on Industrial Engineering and Operations Management (pp. 585-597). Springer, Cham.
[24] Cárdenas-Barrón, L. E. (2009). Economic production quantity with rework process at a single-stage manufacturing system with planned backorders. Computers & Industrial Engineering, 57(3), 1105-1113.
[25] Cunha, L. R. A., Delfino, A. P. S., dos Reis, K. A., & Leiras, A. (2018). Economic production quantity (EPQ) model with partial backordering and a discount for imperfect quality batches. International Journal of Production Research, 56(18), 6279-6293.
[26] Khan, M., Ahmad, A. R., & Hussain, M. (2019). Integrated decision models for a vendor–buyer supply chain with inspection errors and purchase and repair options. The International Journal of Advanced Manufacturing Technology, 104(9), 3221-3228.
[27] Tsai, W. C., Shih, N. H., & Wang, C. H. (2018). The effects of inspection delay and restoration cost on the optimal inspection and production policy. Opsearch, 55(1), 187-195.
[28] Keshavarzfard, R., Makui, A., Tavakkoli-Moghaddam, R., & Taleizadeh, A. A. (2019). Optimization of imperfect economic manufacturing models with a power demand rate dependent production rate. Sādhanā, 44(9), 1-19.
[29] Rout, C., Kumar, R. S., Chakraborty, D., & Goswami, A. (2019). An EPQ model for deteriorating items with imperfect production, inspection errors, rework and shortages: a type-2 fuzzy approach. Opsearch, 56(3), 657-688.
[30] Salameh, M. K., & Jaber, M. Y. (2000). Economic production quantity model for items with imperfect quality. International journal of production economics, 64(1-3), 59-64.
[31] Montgomery, D. C., Bazaraa, M. S., & Keswani, A. K. (1973). Inventory models with a mixture of backorders and lost sales. Naval Research Logistics Quarterly, 20(2), 255-263.
[32] Zipkin P.H (2000). Foundations of Inventory Management. New York: McGrawHill.
[25] Cunha, L. R. A., Delfino, A. P. S., dos Reis, K. A., & Leiras, A. (2018). Economic production quantity (EPQ) model with partial backordering and a discount for imperfect quality batches. International Journal of Production Research, 56(18), 6279-6293.
[26] Khan, M., Ahmad, A. R., & Hussain, M. (2019). Integrated decision models for a vendor–buyer supply chain with inspection errors and purchase and repair options. The International Journal of Advanced Manufacturing Technology, 104(9), 3221-3228.
[27] Tsai, W. C., Shih, N. H., & Wang, C. H. (2018). The effects of inspection delay and restoration cost on the optimal inspection and production policy. Opsearch, 55(1), 187-195.
[28] Keshavarzfard, R., Makui, A., Tavakkoli-Moghaddam, R., & Taleizadeh, A. A. (2019). Optimization of imperfect economic manufacturing models with a power demand rate dependent production rate. Sādhanā, 44(9), 1-19.
[29] Rout, C., Kumar, R. S., Chakraborty, D., & Goswami, A. (2019). An EPQ model for deteriorating items with imperfect production, inspection errors, rework and shortages: a type-2 fuzzy approach. Opsearch, 56(3), 657-688.
[30] Salameh, M. K., & Jaber, M. Y. (2000). Economic production quantity model for items with imperfect quality. International journal of production economics, 64(1-3), 59-64.
[31] Montgomery, D. C., Bazaraa, M. S., & Keswani, A. K. (1973). Inventory models with a mixture of backorders and lost sales. Naval Research Logistics Quarterly, 20(2), 255-263.
[32] Zipkin P.H (2000). Foundations of Inventory Management. New York: McGrawHill.
[33] Pentico, D. W., & Drake, M. J. (2009). The deterministic EOQ with partial backordering: a new approach. European Journal of Operational Research, 194(1), 102-113.
[34] Pentico, D. W., Drake, M. J., & Toews, C. (2009). The deterministic EPQ with partial backordering: a new approach. Omega, 37(3), 624-636.
[35] Hsieh, T. P., & Dye, C. Y. (2012). A note on “The EPQ with partial backordering and phase-dependent backordering rate”. Omega, 40(1), 131-133.
[36] Taleizadeh, A. A., Pentico, D. W., Aryanezhad, M., & Ghoreyshi, S. M. (2012). An economic order quantity model with partial backordering and a special sale price. European Journal of Operational Research, 221(3), 571-583.
[37] Karimi-Nasab, M., & Wee, H. M. (2015). An inventory model with truncated exponential replenishment intervals and special sale offer. Journal of Manufacturing Systems, 35, 246-250.
[38] Salehi, H., Taleizadeh, A. A., & Tavakkoli-Moghaddam, R. (2016). An EOQ model with random disruption and partial backordering. International Journal of Production Research, 54(9), 2600-2609.
[34] Pentico, D. W., Drake, M. J., & Toews, C. (2009). The deterministic EPQ with partial backordering: a new approach. Omega, 37(3), 624-636.
[35] Hsieh, T. P., & Dye, C. Y. (2012). A note on “The EPQ with partial backordering and phase-dependent backordering rate”. Omega, 40(1), 131-133.
[36] Taleizadeh, A. A., Pentico, D. W., Aryanezhad, M., & Ghoreyshi, S. M. (2012). An economic order quantity model with partial backordering and a special sale price. European Journal of Operational Research, 221(3), 571-583.
[37] Karimi-Nasab, M., & Wee, H. M. (2015). An inventory model with truncated exponential replenishment intervals and special sale offer. Journal of Manufacturing Systems, 35, 246-250.
[38] Salehi, H., Taleizadeh, A. A., & Tavakkoli-Moghaddam, R. (2016). An EOQ model with random disruption and partial backordering. International Journal of Production Research, 54(9), 2600-2609.
[39] Duffuaa, S. O., & Khan, M. (2005). Impact of inspection errors on the performance measures of a general repeat inspection plan. International Journal of Production Research, 43(23), 4945-4967.
[40] Chiu, S. W. (2010). Robust planning in optimization for production system subject to random machine breakdown and failure in rework. Computers & Operations Research, 37(5), 899-908.
[41] Al-Salamah, M. (2016). Economic production quantity in batch manufacturing with imperfect quality, imperfect inspection, and destructive and non-destructive acceptance sampling in a two-tier market. Computers & Industrial Engineering, 93, 275-285.
[42] Taleizadeh, A. A., Niaki, S. T. A., & Najafi, A. A. (2010). Multiproduct single-machine production system with stochastic scrapped production rate, partial backordering and service level constraint. Journal of Computational and Applied Mathematics, 233(8), 1834-1849.
[43] Sarker, B.R., Jamal, A.M.M., & Mondal, S. (2008). Optimal batch sizing in a process at multi-stage production system with network consideration. European Journal of Operational research, 184, 915-929.
[44] Chung, K. J., Her, C. C., & Lin, S. D. (2009). A two-warehouse inventory model with imperfect quality production processes. Computers & Industrial Engineering, 56(1), 193-197.
[45] Hu, J. S., Zheng, H., Guo, C. Y., & Ji, Y. P. (2010). Optimal production run length with imperfect production processes and backorder in fuzzy random environment. Computers & Industrial Engineering, 59(1), 9-15.
[46] Khan, M., Jaber, M. Y., Guiffrida, A. L., & Zolfaghari, S. (2011). A review of the extensions of a modified EOQ model for imperfect quality items. International Journal of Production Economics, 132(1),1-12.
[47] Sadjadi, S. J., Yazdian, S. A., & Shahanaghi, K. (2012). Optimal pricing, lot-sizing and marketing planning in a capacitated and imperfect production system. Computers & Industrial
Engineering, 62(1), 349-358.
[48] Cárdenas-Barrón, L. E., Taleizadeh, A. A., & Treviño-Garza, G. (2012). An improved solution to replenishment lot size problem with discontinuous issuing policy and rework, and the multi- delivery policy into economic production lot size problem with partial rework. Expert Systems with Applications, 39(18), 13540-13546.
[49] Wee, H. M., Wang, W. T., & Cárdenas-Barrón, L. E. (2013). An alternative analysis and solution procedure for the EPQ model with rework process at a single-stage manufacturing system with planned backorders. Computers & Industrial Engineering, 64(2), 748-755.
[50] Khan, M., Jaber, M. Y., & Ahmad, A. R. (2014). An integrated supply chain model with errors in quality inspection and learning in production. Omega, 42(1), 16-24.
[51] Khanna, A., Kishore, A., & Jaggi, C. (2017). Strategic production modeling for defective items with imperfect inspection process, rework, and sales return under two-level trade credit. International Journal of Industrial Engineering Computations, 8(1), 85-118.
[52] Al-Salamah, M. (2019). Economic production quantity in an imperfect manufacturing process with synchronous and asynchronous flexible rework rates. Operations research perspectives, 6, 100103.
[53] Lee, H. L., & Rosenblatt, M. J. (1985). Optimal inspection and ordering policies for products with imperfect quality. IIE transactions, 17(3), 284-289.
[54] Porteus, E. L. (1986). Optimal lot sizing, process quality improvement and setup cost reduction. Operations research, 34(1), 137-144.
[55] Chan, W. M., Ibrahim, R. N., & Lochert, P. B. (2003). A new EPQ model: integrating lower pricing, rework and reject situations. Production Planning & Control, 14(7), 588-595.
[56] Chiu, Y. P. (2003). Determining the optimal lot size for the finite production model with random defective rate, the rework process, and backlogging. Engineering optimization, 35(4), 427-437.
[57] Tsou, J. C., Hejazi, S. R., & Barzoki, M. R. (2012). Economic production quantity model for items with continuous quality characteristic, rework and reject. International Journal of Systems
Science, 43(12), 2261-2267.
[58] Jaggi, C. K., Khanna, A., & Kishore, A. (2016, March). Production inventory policies for efective items with inspection errors, sales return, imperfect rework process and backorders. In AIP Conference Proceedings (Vol. 1715, No. 1, p. 020062). AIP Publishing LLC.
[59] Selvaraju, P., & Ghuru, S. K. (2018). Imperfect production system with rework and scrap at a single stage manufacturing system and integrates cost reduction delivery policy. International Journal of Operational Research, 32(4), 472-494.
[60] Nobil, A. H., Afshar Sedigh, A. H., & Afshar-Nadjafi, B. (2020). Lot- sizing problem for a defective processing system with categorized items, backordering and pricing policy. Journal of Revenue and Pricing Management, 19(4), 255-265.
[40] Chiu, S. W. (2010). Robust planning in optimization for production system subject to random machine breakdown and failure in rework. Computers & Operations Research, 37(5), 899-908.
[41] Al-Salamah, M. (2016). Economic production quantity in batch manufacturing with imperfect quality, imperfect inspection, and destructive and non-destructive acceptance sampling in a two-tier market. Computers & Industrial Engineering, 93, 275-285.
[42] Taleizadeh, A. A., Niaki, S. T. A., & Najafi, A. A. (2010). Multiproduct single-machine production system with stochastic scrapped production rate, partial backordering and service level constraint. Journal of Computational and Applied Mathematics, 233(8), 1834-1849.
[43] Sarker, B.R., Jamal, A.M.M., & Mondal, S. (2008). Optimal batch sizing in a process at multi-stage production system with network consideration. European Journal of Operational research, 184, 915-929.
[44] Chung, K. J., Her, C. C., & Lin, S. D. (2009). A two-warehouse inventory model with imperfect quality production processes. Computers & Industrial Engineering, 56(1), 193-197.
[45] Hu, J. S., Zheng, H., Guo, C. Y., & Ji, Y. P. (2010). Optimal production run length with imperfect production processes and backorder in fuzzy random environment. Computers & Industrial Engineering, 59(1), 9-15.
[46] Khan, M., Jaber, M. Y., Guiffrida, A. L., & Zolfaghari, S. (2011). A review of the extensions of a modified EOQ model for imperfect quality items. International Journal of Production Economics, 132(1),1-12.
[47] Sadjadi, S. J., Yazdian, S. A., & Shahanaghi, K. (2012). Optimal pricing, lot-sizing and marketing planning in a capacitated and imperfect production system. Computers & Industrial
Engineering, 62(1), 349-358.
[48] Cárdenas-Barrón, L. E., Taleizadeh, A. A., & Treviño-Garza, G. (2012). An improved solution to replenishment lot size problem with discontinuous issuing policy and rework, and the multi- delivery policy into economic production lot size problem with partial rework. Expert Systems with Applications, 39(18), 13540-13546.
[49] Wee, H. M., Wang, W. T., & Cárdenas-Barrón, L. E. (2013). An alternative analysis and solution procedure for the EPQ model with rework process at a single-stage manufacturing system with planned backorders. Computers & Industrial Engineering, 64(2), 748-755.
[50] Khan, M., Jaber, M. Y., & Ahmad, A. R. (2014). An integrated supply chain model with errors in quality inspection and learning in production. Omega, 42(1), 16-24.
[51] Khanna, A., Kishore, A., & Jaggi, C. (2017). Strategic production modeling for defective items with imperfect inspection process, rework, and sales return under two-level trade credit. International Journal of Industrial Engineering Computations, 8(1), 85-118.
[52] Al-Salamah, M. (2019). Economic production quantity in an imperfect manufacturing process with synchronous and asynchronous flexible rework rates. Operations research perspectives, 6, 100103.
[53] Lee, H. L., & Rosenblatt, M. J. (1985). Optimal inspection and ordering policies for products with imperfect quality. IIE transactions, 17(3), 284-289.
[54] Porteus, E. L. (1986). Optimal lot sizing, process quality improvement and setup cost reduction. Operations research, 34(1), 137-144.
[55] Chan, W. M., Ibrahim, R. N., & Lochert, P. B. (2003). A new EPQ model: integrating lower pricing, rework and reject situations. Production Planning & Control, 14(7), 588-595.
[56] Chiu, Y. P. (2003). Determining the optimal lot size for the finite production model with random defective rate, the rework process, and backlogging. Engineering optimization, 35(4), 427-437.
[57] Tsou, J. C., Hejazi, S. R., & Barzoki, M. R. (2012). Economic production quantity model for items with continuous quality characteristic, rework and reject. International Journal of Systems
Science, 43(12), 2261-2267.
[58] Jaggi, C. K., Khanna, A., & Kishore, A. (2016, March). Production inventory policies for efective items with inspection errors, sales return, imperfect rework process and backorders. In AIP Conference Proceedings (Vol. 1715, No. 1, p. 020062). AIP Publishing LLC.
[59] Selvaraju, P., & Ghuru, S. K. (2018). Imperfect production system with rework and scrap at a single stage manufacturing system and integrates cost reduction delivery policy. International Journal of Operational Research, 32(4), 472-494.
[60] Nobil, A. H., Afshar Sedigh, A. H., & Afshar-Nadjafi, B. (2020). Lot- sizing problem for a defective processing system with categorized items, backordering and pricing policy. Journal of Revenue and Pricing Management, 19(4), 255-265.
[61] Yoo, S. H., Kim, D., & Park, M. S. (2009). Economic production quantity model with imperfect-quality items, two-way imperfect inspection and sales return. International Journal of Production
Economics, 121(1), 255-265.
[62] Wee, H. M., & Widyadana, G. A. (2013). A production model for deteriorating items with stochastic preventive maintenance time and rework process with FIFO rule. Omega, 41(6), 941-954.
[63] Zhou, Y. W., Chen, J., Wu, Y., & Zhou, W. (2015). EPQ models for items with imperfect quality and one-time-only discount. Applied Mathematical Modelling, 39(3-4), 1000-1018.
[64] Paknejad, J., Nasri, F., & Affisco, J. F. (2005). Quality improvement in an inventory model with finite-range stochastic lead times. Journal of Applied Mathematics and Decision Sciences, 2005(3), 177-189.
[65] Miranda, S., Vilela, J., & Leiras, A. (2020, July). Economic Production Quantity Model Considering Items with Distinct Levels of Imperfection. In International Joint conference on Industrial Engineering and Operations Management (pp. 537-547). Springer, Cham.
[66] Roy, M. D., Sana, S. S., & Chaudhuri, K. (2011). An economic order quantity model of imperfect quality items with partial backlogging. International journal of systems Science, 42(8), 1409-1419.
[67] Yu, J. C., Wee, H. M., & Chen, J. M. (2005). Optimal ordering policy for a deteriorating item with imperfect quality and partial backordering. Journal of the Chinese institute of industrial engineers, 22(6), 509-520.
[68] Hayek, P. A., & Salameh, M. K. (2001). Production lot sizing with the reworking of imperfect quality items produced. Production planning & control, 12(6), 584-590.
[69] Sarkar, B., Cárdenas-Barrón, L. E., Sarkar, M., & Singgih, M. L. (2014). An economic production quantity model with random defective rate, rework process and backorders for a single stage production system. Journal of Manufacturing Systems, 33(3), 423-435.
[70] Eroglu, A., & Ozdemir, G. (2007). An economic order quantity model with defective items and shortages. International journal of production economics, 106(2), 544-549.
[71] Jamal, A. M. M., Sarker, B. R., & Mondal, S. (2004). Optimal manufacturing batch size with rework process at a single-stage production system. Computers & industrial engineering, 47(1), 77-89.
[72] Taleizadeh, A. A., Sadjadi, S. J., & Niaki, S. T. A. (2011). Multiproduct EPQ model with single machine, backordering and immediate rework process. European Journal of Industrial Engineering, 5(4), 388-411.
[73] Hsu, J. T., & Hsu, L. F. (2013). Two EPQ models with imperfect production processes, inspection errors, planned backorders, and sales returns. Computers & Industrial Engineering, 64(1), 389-402.
[74] Taleizadeh, A. A., Cárdenas-Barrón, L. E., & Mohammadi, B. (2014). A deterministic multi product single machine EPQ model with backordering, scraped products, rework and interruption in manufacturing process. International Journal of Production Economics, 150, 9-27.
[75] Cheng, Y. L., Wang, W. T., & Wei, C. C. (2018). Optimal production lot sizing when demand is proportional to stock and backorder levels. International Journal of Industrial Engineering, 25(2).
[76] Najafi, M., Ghodratnama, A., & Pasandideh, H. R. (2018). Solving a deterministic multi product single machine EPQ model withpartial backordering, scrapped products and rework. International Journal of Supply and Operations Management, 5(1), 11-27.
[77] Taleizadeh, A. A., Yadegari, M., & Sana, S. S. (2019). Production models of multiple products using a single machine under quality screening and reworking policies. Journal of Modelling in
Management, 14(1): 232-259.
[78] Lai, X., Chen, Z., & Bidanda, B. (2019). Optimal decision of an economic production quantity model for imperfect manufacturing under hybrid maintenance policy with shortages and partial
backlogging. International Journal of Production Research, 57(19),6061-6085.
[79] Khalilpourazari, S., Mirzazadeh, A., Weber, G. W., & Pasandideh, S. H. R. (2019). A robust fuzzy approach for constrained multi-product economic production quantity with imperfect items and rework process. Optimization.
[80] Nobil, A. H., Afshar Sedigh, A. H., Tiwari, S., & Wee, H. M. (2019). An imperfect multi-item single machine production system with shortage, rework, and scrapped considering inspection, dissimilar deficiency levels, and non-zero setup times. Scientia Iranica, 26(1), 557-570.
[81] Silva, M. A., de Paula, I., & Leiras, A. (2020, July). EPQ Model with Partial Backordering Considering Environmental Aspects and Stochastic Demand. In International Joint conference on Industrial Engineering and Operations Management (pp. 115-126). Springer, Cham.
[82] Taleizadeh, A. A. (2017). Lot‐sizing model with advance payment pricing and disruption in supply under planned partial backordering. International Transactions in Operational Research, 24(4), 783-800.
[83] Pentico, D. W., Toews, C., & Drake, M. J. (2015). Approximating the EOQ with partial backordering at an exponential or rational rate by a constant or linearly changing rate. International Journal of Production Economics, 162, 151-159.
[84] Leiras, A., Ribas, G., Hamacher, S., & Elkamel, A. (2013). Tactical and operational planning of multirefinery networks under uncertainty: an iterative integration approach. Industrial & Engineering Chemistry Research, 52(25), 8507-8517.
[85] Ribas, G. P., Leiras, A., & Hamacher, S. (2012). Operational planning of oil refineries under uncertainty Special issue: applied stochastic optimization. IMA Journal of Management Mathematics, 23(4), 397-412.
Economics, 121(1), 255-265.
[62] Wee, H. M., & Widyadana, G. A. (2013). A production model for deteriorating items with stochastic preventive maintenance time and rework process with FIFO rule. Omega, 41(6), 941-954.
[63] Zhou, Y. W., Chen, J., Wu, Y., & Zhou, W. (2015). EPQ models for items with imperfect quality and one-time-only discount. Applied Mathematical Modelling, 39(3-4), 1000-1018.
[64] Paknejad, J., Nasri, F., & Affisco, J. F. (2005). Quality improvement in an inventory model with finite-range stochastic lead times. Journal of Applied Mathematics and Decision Sciences, 2005(3), 177-189.
[65] Miranda, S., Vilela, J., & Leiras, A. (2020, July). Economic Production Quantity Model Considering Items with Distinct Levels of Imperfection. In International Joint conference on Industrial Engineering and Operations Management (pp. 537-547). Springer, Cham.
[66] Roy, M. D., Sana, S. S., & Chaudhuri, K. (2011). An economic order quantity model of imperfect quality items with partial backlogging. International journal of systems Science, 42(8), 1409-1419.
[67] Yu, J. C., Wee, H. M., & Chen, J. M. (2005). Optimal ordering policy for a deteriorating item with imperfect quality and partial backordering. Journal of the Chinese institute of industrial engineers, 22(6), 509-520.
[68] Hayek, P. A., & Salameh, M. K. (2001). Production lot sizing with the reworking of imperfect quality items produced. Production planning & control, 12(6), 584-590.
[69] Sarkar, B., Cárdenas-Barrón, L. E., Sarkar, M., & Singgih, M. L. (2014). An economic production quantity model with random defective rate, rework process and backorders for a single stage production system. Journal of Manufacturing Systems, 33(3), 423-435.
[70] Eroglu, A., & Ozdemir, G. (2007). An economic order quantity model with defective items and shortages. International journal of production economics, 106(2), 544-549.
[71] Jamal, A. M. M., Sarker, B. R., & Mondal, S. (2004). Optimal manufacturing batch size with rework process at a single-stage production system. Computers & industrial engineering, 47(1), 77-89.
[72] Taleizadeh, A. A., Sadjadi, S. J., & Niaki, S. T. A. (2011). Multiproduct EPQ model with single machine, backordering and immediate rework process. European Journal of Industrial Engineering, 5(4), 388-411.
[73] Hsu, J. T., & Hsu, L. F. (2013). Two EPQ models with imperfect production processes, inspection errors, planned backorders, and sales returns. Computers & Industrial Engineering, 64(1), 389-402.
[74] Taleizadeh, A. A., Cárdenas-Barrón, L. E., & Mohammadi, B. (2014). A deterministic multi product single machine EPQ model with backordering, scraped products, rework and interruption in manufacturing process. International Journal of Production Economics, 150, 9-27.
[75] Cheng, Y. L., Wang, W. T., & Wei, C. C. (2018). Optimal production lot sizing when demand is proportional to stock and backorder levels. International Journal of Industrial Engineering, 25(2).
[76] Najafi, M., Ghodratnama, A., & Pasandideh, H. R. (2018). Solving a deterministic multi product single machine EPQ model withpartial backordering, scrapped products and rework. International Journal of Supply and Operations Management, 5(1), 11-27.
[77] Taleizadeh, A. A., Yadegari, M., & Sana, S. S. (2019). Production models of multiple products using a single machine under quality screening and reworking policies. Journal of Modelling in
Management, 14(1): 232-259.
[78] Lai, X., Chen, Z., & Bidanda, B. (2019). Optimal decision of an economic production quantity model for imperfect manufacturing under hybrid maintenance policy with shortages and partial
backlogging. International Journal of Production Research, 57(19),6061-6085.
[79] Khalilpourazari, S., Mirzazadeh, A., Weber, G. W., & Pasandideh, S. H. R. (2019). A robust fuzzy approach for constrained multi-product economic production quantity with imperfect items and rework process. Optimization.
[80] Nobil, A. H., Afshar Sedigh, A. H., Tiwari, S., & Wee, H. M. (2019). An imperfect multi-item single machine production system with shortage, rework, and scrapped considering inspection, dissimilar deficiency levels, and non-zero setup times. Scientia Iranica, 26(1), 557-570.
[81] Silva, M. A., de Paula, I., & Leiras, A. (2020, July). EPQ Model with Partial Backordering Considering Environmental Aspects and Stochastic Demand. In International Joint conference on Industrial Engineering and Operations Management (pp. 115-126). Springer, Cham.
[82] Taleizadeh, A. A. (2017). Lot‐sizing model with advance payment pricing and disruption in supply under planned partial backordering. International Transactions in Operational Research, 24(4), 783-800.
[83] Pentico, D. W., Toews, C., & Drake, M. J. (2015). Approximating the EOQ with partial backordering at an exponential or rational rate by a constant or linearly changing rate. International Journal of Production Economics, 162, 151-159.
[84] Leiras, A., Ribas, G., Hamacher, S., & Elkamel, A. (2013). Tactical and operational planning of multirefinery networks under uncertainty: an iterative integration approach. Industrial & Engineering Chemistry Research, 52(25), 8507-8517.
[85] Ribas, G. P., Leiras, A., & Hamacher, S. (2012). Operational planning of oil refineries under uncertainty Special issue: applied stochastic optimization. IMA Journal of Management Mathematics, 23(4), 397-412.
