A

  • Abdolkhani.Fakher Effect of Different FGM Models on Creep Analysis of Thick-walled Cylindrical Pressure Vessel [ Vol.12, Issue 3 - Summer Year 2023]
  • abdollahi.amir Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm [ Vol.12, Issue 2 - Spring Year 2023]
  • Abdollahian.Heidar Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [ Vol.8, Issue 4 - Autumn Year 2019]
  • Abdolmaleki.Bahram Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing [ Vol.11, Issue 4 - Autumn Year 2022]
  • Abedi.Ali Optimization of parameters of Anti lock Braking System for use in deep drawing [ Vol.2, Issue 1 - Winter Year 2013]
  • abedinzadeh.reza Effects of Shot Peening Angle and Time on Microstructure and Wear Behavior of AZ31 Alloy [ Vol.12, Issue 2 - Spring Year 2023]
  • abedinzadeh.reza The Computational Study of Number of Shot Particles and Distance Effects on Residual Stress and Mechanical Behavior of Ti-6Al-4V Alloy after Shot Peening Process: Molecular Dynamics Approach [ Vol.11, Issue 2 - Spring Year 2022]
  • Abnavi.Hojatollah An Electrochemical Investigation on the Effect of Heat-Stable Salts on the Corrosion Resistance of Carbon Steel in MDEA Solution [ Vol.10, Issue 3 - Summer Year 2021]
  • Abtahi.Mehdi Nonlinear Buckling Analysis of Different Types of Porous FG Sandwich Beams with Temperature-Dependent [ Vol.12, Issue 4 - Autumn Year 2023]
  • Adiban.Reza Development of Linguistic Rules Diagnosis of Failure in Centrifugal Pump for Use in Expert System [ Vol.4, Issue 2 - Spring Year 2015]
  • Adnani Salehi.Seyed Adnan A Novel Optimization Approach Applied to Multi-Pass Turning Process [ Vol.6, Issue 2 - Spring Year 2017]
  • Adnani Salehi.Seyed Adnan Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [ Vol.6, Issue 4 - Autumn Year 2017]
  • Adressi.A Solving the Problem of Scheduling Unrelated Parallel Machines with Limited Access to Jobs [ Vol.3, Issue 2 - Spring Year 2014]
  • Adressi.A Solving Group Scheduling Problem in No-wait Flow Shop with Sequence Dependent Setup Times [ Vol.3, Issue 1 - Winter Year 2014]
  • Afsari.Ahmad Simulation and Thermo-Mechanical Analysis of AA6063-T5 in FSW by FEM [ Vol.13, Issue 2 - Spring Year 2024]
  • Afsari.Ahmad Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods [ Vol.13, Issue 2 - Spring Year 2024]
  • Afsari.Ahmad Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel [ Vol.9, Issue 1 - Winter Year 2020]
  • Afsari.Ahmad Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]
  • Afsari.Ahmad An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 3 - Summer Year 2021]
  • Afsari.Ahmad Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [ Vol.5, Issue 3 - Summer Year 2016]
  • Afsari.Ahmad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Afsari.Ahmad Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 4 - Autumn Year 2021]
  • Afsari.Ahmad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Afsari.Ahmad Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • Afsari.Ahmad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Afsari.Ahmad Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process [ Vol.10, Issue 1 - Winter Year 2021]
  • Afsari.Ahmad Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Afsari.Ahmad Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • AFSARI.AHMAD Study the Effects of the Cryogenic Method Using Liquid Nitrogen on Fittings in Assembly Process [ Vol.12, Issue 2 - Spring Year 2023]
  • AFSARI.AHMAD Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts [ Vol.12, Issue 1 - Winter Year 2023]
  • AFSARI.AHMAD Comparing and Investigating the Effect of Input Parameters on External Parameters in Parts of Different Materials in EDM Operation Using Taguchi Method [ Vol.12, Issue 4 - Autumn Year 2023]
  • Afshari.Hossein Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology [ Vol.12, Issue 3 - Summer Year 2023]
  • Aghadavoudi.Farshid Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation [ Vol.12, Issue 1 - Winter Year 2023]
  • Aghajani Derazkola.Hamed Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [ Vol.7, Issue 4 - Autumn Year 2018]
  • Ahmadi.Farshid Evolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum [ Vol.4, Issue 4 - Autumn Year 2015]
  • Ahmadi.Farshid Comparison of Hardness Values of Various specimens with different geometries and material properties after ECAP [ Vol.3, Issue 3 - Summer Year 2014]
  • Ahmadi.Moslem Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow [ Vol.4, Issue 1 - Winter Year 2015]
  • Ajmadi.Farshid The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method [ Vol.10, Issue 2 - Spring Year 2021]
  • Ajmadi.Farshid Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017 [ Vol.11, Issue 3 - Summer Year 2022]
  • Ajmadi.Farshid Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm [ Vol.12, Issue 2 - Spring Year 2023]
  • Akbari.Davood Measurement of Residual Stress in Composites Using Central Hole Drilling and Digital Image Correlation Methods [ Vol.11, Issue 2 - Spring Year 2022]
  • Akbari.Javad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Akbari.Mostafa Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method [ Vol.10, Issue 2 - Spring Year 2021]
  • Akbari.Mostafa Impact of FSP Tool Probe Shape on Reinforcing Particles Dispersion in the Piston Alloy Using CEL Approach [ Vol.11, Issue 4 - Autumn Year 2022]
  • Akbari.Mostafa Analyzing Thermomechanical Characteristics: A Comparative Study of Stationary Shoulder FSW and Conventional FSW [ Vol.12, Issue 4 - Autumn Year 2023]
  • Al Khatour.Saleh Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy [ Vol.13, Issue 1 - Winter Year 2024]
  • Alam Tabriz.Akbar Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [ Vol.8, Issue 1 - Winter Year 2019]
  • Alinaghian.Iman Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [ Vol.5, Issue 4 - Autumn Year 2016]
  • alinezhad.alireza Ranking and Managing Stock in the Stock Market Using Fundamental and Technical Analyses [ Vol.4, Issue 3 - Summer Year 2015]
  • Amindoust.Atefeh Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [ Vol.10, Issue 2 - Spring Year 2021]
  • Amindoust.Atefeh Ranking of the Solutions of Reducing Electrical Energy Consumption in Isfahan Sepahan Cement Industry by Using Fuzzy TOPSIS Method [ Vol.8, Issue 2 - Spring Year 2019]
  • Amindoust.Atefeh Ranking of Outsourcing Risks in Supply Chain of Automotive Industry Using Fuzzy AHP and Fuzzy Inference System [ Vol.8, Issue 1 - Winter Year 2019]
  • Amini.Amir Ranking 7Ms Effective Factors in Iranian Production Systems Using Fuzzy AHP [ Vol.8, Issue 1 - Winter Year 2019]
  • Amini.Amir Ranking and Managing Stock in the Stock Market Using Fundamental and Technical Analyses [ Vol.4, Issue 3 - Summer Year 2015]
  • Amini.Amir A Two-phase Model for Product Design Development and Evaluation and Supplier Selection in Product Configuration Change Process (Case study: SUPCO) [ Vol.3, Issue 3 - Summer Year 2014]
  • Amini.Kamran Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation [ Vol.12, Issue 1 - Winter Year 2023]
  • Amini.Kamran The Computational Study of Number of Shot Particles and Distance Effects on Residual Stress and Mechanical Behavior of Ti-6Al-4V Alloy after Shot Peening Process: Molecular Dynamics Approach [ Vol.11, Issue 2 - Spring Year 2022]
  • Amini.Saeid تأثیر پارامترهای ماشینکاری تخلیه الکتریکی در مرحله‌ی پرداخت بر روی سرعت براده برداری [ Vol.1, Issue 2 - Spring Year 1389]
  • Amini.Saeid The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]
  • Ari-Gur.Pnina Prediction of Heusler Alloys with Giant Magnetocaloric Effect using Machine-Learning [ Vol.11, Issue 3 - Summer Year 2022]
  • Ari-Gur.Pnina An Investigation on Formability and Crystallographic Texture in Novel Magnesium Alloys [ Vol.10, Issue 3 - Summer Year 2021]
  • Armanian.Amin The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods [ Vol.6, Issue 2 - Spring Year 2017]
  • Aryana.Maryam Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications [ Vol.4, Issue 4 - Autumn Year 2015]
  • Asadbeiki.Mohammad Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy [ Vol.8, Issue 3 - Summer Year 2019]
  • Asadi Asad Abad.Mohammad Reza Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [ Vol.8, Issue 4 - Autumn Year 2019]
  • Asadi.Mehrdad Implementation of Agile Manufacturing Principles in Small and Medium Enterprises (SMES) [ Vol.4, Issue 3 - Summer Year 2015]
  • Asadi.Parviz Improving the Hardness and Microstructural Properties of Piston Alloy Using the FSP Method [ Vol.10, Issue 2 - Spring Year 2021]
  • Asiaban.Naser Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • azadi.farid Measurement of Residual Stress in Composites Using Central Hole Drilling and Digital Image Correlation Methods [ Vol.11, Issue 2 - Spring Year 2022]
  • Azdast.Taher بررسی اثر پارامترهای فرایند قالبگیری تزریقی ABS و PP به کمک آب با استفاده از روش بهینه سازی تابع هدف با معیارهای چندگانه (OEC) [ Vol.1, Issue 3 - Summer Year 1389]
  • Azimi.Masoud An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA [ Vol.6, Issue 1 - Winter Year 2017]
  • Azizi.Abdolhamid Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [ Vol.10, Issue 3 - Summer Year 2021]
  • azizifar.shahram Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions [ Vol.4, Issue 2 - Spring Year 2015]

B

  • Babaeifard.Shayan CAD Model and Finite Element Analysis of a Knee Brace for General Applications [ Vol.12, Issue 2 - Spring Year 2023]
  • Badami.Amirhossein Simulation of Drug Release in a Polymer Screw [ Vol.11, Issue 4 - Autumn Year 2022]
  • Badami.Amirhossein CAD Model and Finite Element Analysis of a Knee Brace for General Applications [ Vol.12, Issue 2 - Spring Year 2023]
  • baghbani.Mohammad IDEF0 Modeling Standard: A Tool for Process Map Drawing under Requirements of ISO 9001: 2015: A Case Study [ Vol.8, Issue 4 - Autumn Year 2019]
  • Bagheri Hasan Abadi.Hasan Improving the Efficiency and Durability of Blast Furnace Air Tuyere Through Different Ceramic Coating Materials [ Vol.12, Issue 3 - Summer Year 2023]
  • Baharizadeh.Seyed Mehdi Implementation and Simulation of an Automated PLC Hydraulic System for a Double-acting Actuator Using a Proportional Valve [ Vol.11, Issue 3 - Summer Year 2022]
  • Bahmankhah.Behnam Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [ Vol.3, Issue 4 - Autumn Year 2014]
  • bahrami.maryam Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [ Vol.10, Issue 2 - Spring Year 2021]
  • Bahrami.Pooya Investigation of Mechanical Properties for Commercial Purity Titanium Severely Plastic Deformed by Accumulative Roll-bonding Process [ Vol.6, Issue 2 - Spring Year 2017]
  • Bahrami.Poya Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [ Vol.10, Issue 3 - Summer Year 2021]
  • Bahramkia.Alireza Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss [ Vol.11, Issue 4 - Autumn Year 2022]
  • Bahramkia.Alireza Comparing and Investigating the Effect of Input Parameters on External Parameters in Parts of Different Materials in EDM Operation Using Taguchi Method [ Vol.12, Issue 4 - Autumn Year 2023]
  • Bakhtiarizade.Hamed Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [ Vol.5, Issue 2 - Spring Year 2016]
  • Bakhtiary Dastgerdi.nafiseh Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]
  • Barahimi.Vahid Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode [ Vol.6, Issue 1 - Winter Year 2017]
  • Barahimi.Vahid Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [ Vol.5, Issue 2 - Spring Year 2016]
  • Barootiha.Ali Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]
  • Basiri Paknafs.Zahra The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]
  • Bavarsad.Belgheis Study of the Impact of Supply Chain Sustainability Dimensions on Sustainable Competitive Advantage with the Mediating Role of Production Flexibility and Strategic Flexibility (Case Study: Dairy Industry of Fars Province) [ Vol.13, Issue 1 - Winter Year 2024]
  • Behagh.Amir Masoud A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Behagh.Omid A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Behbahani.Saeed Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Behgozin.Sayed Ahmad Study the Effects of the Cryogenic Method Using Liquid Nitrogen on Fittings in Assembly Process [ Vol.12, Issue 2 - Spring Year 2023]
  • Beigi.Mohsen Design and Construction of Load Cell of a Three Point Hitch Dynamometer for Tractor John Deere 3140 [ Vol.3, Issue 2 - Spring Year 2014]
  • biniyazan.Farid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Bisadi.Hossein Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming [ Vol.2, Issue 1 - Winter Year 2013]
  • Bonakdar.Shahin Evaluating the Potential of Polycaprolactone/Heparinized Nano Fluoro Hydroxyapatite Composite Scaffolds for Advancing Bone Tissue Engineering: A Comprehensive Analysis of Biodegradability and Water Absorption [ Vol.13, Issue 1 - Winter Year 2024]
  • Boyer Hassani.Omid An Approach Utilizing Epsilon-Constraint and NSGA-II for Circular Manufacturing Supply Chain Networks [ Vol.12, Issue 2 - Spring Year 2023]

C

  • Choopani.Yahya Micro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles [ Vol.3, Issue 2 - Spring Year 2014]

D

  • Dadgar Asl.Yaghoub Analyzing Thermomechanical Characteristics: A Comparative Study of Stationary Shoulder FSW and Conventional FSW [ Vol.12, Issue 4 - Autumn Year 2023]
  • Davar.Ali Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • Davoodi.Behnam Evaluation of the Cryogenic Effect on Friction Stir Processed AA7075/Si Matrix Nanocomposites [ Vol.13, Issue 1 - Winter Year 2024]
  • Davoodi.Behnam Study of Johnson-Cook Model Comprehensiveness at Moderate Strain Rate and Inverse Analysis to Modify the Constitutive Parameters Using Cold Wire Drawing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Davoodi.Sayyed Mohammad Reza Prioritization of Lean-production Components with Fuzzy Network Analysis: A Case Study (Sam Electric Co.) [ Vol.8, Issue 1 - Winter Year 2019]
  • Davoodi.Sayyed Mohammad Reza Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]
  • Davoodi.Sayyed Mohammad Reza Designing a New Model for Evaluating the Maintenance System [ Vol.6, Issue 1 - Winter Year 2017]
  • de Doncker.Elise Prediction of Heusler Alloys with Giant Magnetocaloric Effect using Machine-Learning [ Vol.11, Issue 3 - Summer Year 2022]
  • Dehghani.Javad An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 3 - Summer Year 2021]
  • Dehghani.Javad Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 4 - Autumn Year 2021]
  • Dehghani.Mahdi Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [ Vol.3, Issue 4 - Autumn Year 2014]
  • Dehghanpour.Sajjad Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]
  • Delfani.Ali Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts [ Vol.6, Issue 4 - Autumn Year 2017]
  • Deylami.Ali Tracking Control of Robots Revisited Based on Taylor Series and Asymptotic Expansion [ Vol.10, Issue 2 - Spring Year 2021]
  • Deylami.Ali Stability of Robust Lyapunov Based Control of Flexible-Joint Robots Using Voltage Control Strategy Revisited [ Vol.10, Issue 4 - Autumn Year 2021]

E

  • Ebrahimi.Mohammad Reza Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [ Vol.8, Issue 3 - Summer Year 2019]
  • Ebrahimi.Zohrhe Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles [ Vol.12, Issue 3 - Summer Year 2023]
  • Emami.Mohsen Investigating the Effect of T6 Heat Treatment on Mechanical Properties of 7075 Al Alloy [ Vol.13, Issue 1 - Winter Year 2024]
  • Enomoto.Kazuki Investigation the Effects of Layer Structure on the Tribological Behaviour of PAI Overlays Containing MoS2 [ Vol.10, Issue 4 - Autumn Year 2021]
  • Esfandiar.Milad Analyzing Thermomechanical Characteristics: A Comparative Study of Stationary Shoulder FSW and Conventional FSW [ Vol.12, Issue 4 - Autumn Year 2023]
  • Eskandari Jam.Jafar Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • Eskandari Shahraki.Majid Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • esmaili.ahmadreza Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [ Vol.9, Issue 4 - Autumn Year 2020]
  • Esmaili.Mohammad Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace [ Vol.8, Issue 4 - Autumn Year 2019]
  • Etemadi Haghighi.Shahram Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]

F

  • Fakhraie.M. Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss [ Vol.11, Issue 4 - Autumn Year 2022]
  • Fallah.M. M. Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • Farahani.Mohammadreza A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets [ Vol.6, Issue 2 - Spring Year 2017]
  • Farahnakian.Masoud Experimental Investigation of Subsurface Damages Made by Cup Grinding and Lapping Process of Optical Glass BK7 in Ductile Mode [ Vol.6, Issue 1 - Winter Year 2017]
  • Farahnakian.Masoud Experimental Study of the Effect of Different Spindle Speeds and Feed Rates in Dry Machining on a Brittle Material [ Vol.10, Issue 4 - Autumn Year 2021]
  • Farahnakian.Masoud Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [ Vol.5, Issue 4 - Autumn Year 2016]
  • Farahnakian.Masoud Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool [ Vol.10, Issue 1 - Winter Year 2021]
  • Farahnakian.Masoud A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Farahnakian.Masoud Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode [ Vol.5, Issue 2 - Spring Year 2016]
  • Farahnakian.Masoud Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [ Vol.5, Issue 3 - Summer Year 2016]
  • Farahnakian.Masoud Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube [ Vol.4, Issue 3 - Summer Year 2015]
  • Farahnakian.Masoud Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder [ Vol.4, Issue 3 - Summer Year 2015]
  • Farahnakian.Masoud Machinability Investigation of Inconel 657 in High-speed Turning [ Vol.3, Issue 1 - Winter Year 2014]
  • Farsi.Mohammad Ali Designing Tolerance Chart and Process for CNC Machining Parts [ Vol.2, Issue 2 - Spring Year 2013]
  • Fazel.Dara Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Fazeli.Ahmadreza بررسی پارامترهای سنگزنی ریشه پره متحرک توربین گازی در فرآیند سنگزنی خزشی و تاثیر آنها بر میزان انحراف ایرفویل پره بکمک روش طراحی آزمایشات [ Vol.1, Issue 3 - Summer Year 1389]
  • Feizi.Masoud Finite Element Modeling and Experimental Study of the Spline Tube Forming [ Vol.4, Issue 1 - Winter Year 2015]
  • Foley.Fionn Investigating Predictive Maintenance Strategies for CNC Machine Tools in the Industry 4.0 Era [ Vol.12, Issue 3 - Summer Year 2023]
  • Foley.Fionn Optimizing the Implementation of a Robotic Welding System [ Vol.12, Issue 2 - Spring Year 2023]
  • Foroojani Zadeh.Kamyar Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [ Vol.5, Issue 4 - Autumn Year 2016]
  • Freegah.Basim Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [ Vol.6, Issue 4 - Autumn Year 2017]

G

  • Ganjali.Mona Analyzing Indexes of Agile Reverse logistics Using Interpretive Structural Modeling Approach [ Vol.3, Issue 3 - Summer Year 2014]
  • Ghaemi Osgouie.Seyed Kambiz Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods [ Vol.13, Issue 2 - Spring Year 2024]
  • Ghaffari.Gholamreza Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing [ Vol.11, Issue 4 - Autumn Year 2022]
  • Ghaffari.Sina Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [ Vol.3, Issue 4 - Autumn Year 2014]
  • Ghani.Jaharah A. Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process [ Vol.11, Issue 1 - Winter Year 2022]
  • Ghani.M. An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Gharaibeh.Tasnim Prediction of Heusler Alloys with Giant Magnetocaloric Effect using Machine-Learning [ Vol.11, Issue 3 - Summer Year 2022]
  • Gharehchahi.Hamidreza Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Gharehchahi.Hamidreza A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Ghasemi Tamami.Peyman Measurement of Residual Stress in Composites Using Central Hole Drilling and Digital Image Correlation Methods [ Vol.11, Issue 2 - Spring Year 2022]
  • Ghassemi.Aazam Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [ Vol.8, Issue 2 - Spring Year 2019]
  • Ghayyem.Majed A Novel Optimization Approach Applied to Multi-Pass Turning Process [ Vol.6, Issue 2 - Spring Year 2017]
  • Ghazi Mir Saeed.Akbar Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Gheiratmand.Gholamali Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [ Vol.10, Issue 3 - Summer Year 2021]
  • Gheisari.Hassan Investigation of the Model of Microscopic Contact Parameters for Grinding M200 Using Elastic Abrasive Tool [ Vol.3, Issue 4 - Autumn Year 2014]
  • Gheisari.Hassan Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades [ Vol.4, Issue 1 - Winter Year 2015]
  • Gheisari.Hassan Survey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process [ Vol.4, Issue 2 - Spring Year 2015]
  • Gheisari.Hassan The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractoriness Materials [ Vol.4, Issue 3 - Summer Year 2015]
  • Gheisari.Hassan Survey and Effects of Manufacture and Assembly Errors on the Output Error of Globoidal Cam Mechanisms [ Vol.4, Issue 4 - Autumn Year 2015]
  • Gholami.Moein Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet [ Vol.12, Issue 1 - Winter Year 2023]
  • Gholami.Raheb Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss [ Vol.11, Issue 4 - Autumn Year 2022]
  • Ghoreishi.Majid Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [ Vol.5, Issue 2 - Spring Year 2016]
  • Golzar.Mohammad Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM) [ Vol.2, Issue 1 - Winter Year 2013]
  • Goodarzi.Mohammad Fractional Order Control of Micro Electro-Mechanical Systems [ Vol.5, Issue 2 - Spring Year 2016]
  • Goodarzi.Mohammad Robust Fractional Order Control of Under-actuated Electromechanical System [ Vol.5, Issue 1 - Winter Year 2016]
  • Goodarzi.Mohammad Robust Lyapunov-based Control of MEMS Optical Switches [ Vol.4, Issue 3 - Summer Year 2015]
  • Gupta.Vishal Machining of Makrana White Marble Surfaces by Abrasive Water Jet Machining [ Vol.11, Issue 2 - Spring Year 2022]

H

  • Habibi.Nabard Effect of Different FGM Models on Creep Analysis of Thick-walled Cylindrical Pressure Vessel [ Vol.12, Issue 3 - Summer Year 2023]
  • Habibi.Sara Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]
  • Habibi.Sara Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [ Vol.7, Issue 3 - Summer Year 2018]
  • Haddadi.Ali Akbar The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [ Vol.8, Issue 2 - Spring Year 2019]
  • Hadipour Moradi.Sepideh Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [ Vol.6, Issue 4 - Autumn Year 2017]
  • Haghani.Nila Evaluating the Potential of Polycaprolactone/Heparinized Nano Fluoro Hydroxyapatite Composite Scaffolds for Advancing Bone Tissue Engineering: A Comprehensive Analysis of Biodegradability and Water Absorption [ Vol.13, Issue 1 - Winter Year 2024]
  • Haghighat.Heshmatollah تحلیل کرانه‌ی بالایی فرآیند اکستروژن مستقیم توخالی با فرض منحنی سینوسی برای مرز ناحیه‌ی فلز مرده با منحنی سینوسی [ Vol.1, Issue 4 - Autumn Year 1389]
  • Haghighat.Heshmatollah Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies [ Vol.12, Issue 4 - Autumn Year 2023]
  • Haghighi.Ahmad Reza Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]
  • Haghpanahi.Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Haghshenas.Abouzar The Mechanical Properties of PA6/NBR/clay/CaCO3 Hybrid Nanocomposites [ Vol.10, Issue 1 - Winter Year 2021]
  • Hamedi.Mohsen Improving the Efficiency and Durability of Blast Furnace Air Tuyere Through Different Ceramic Coating Materials [ Vol.12, Issue 3 - Summer Year 2023]
  • Hasan Nasab.Vahid Investigating the Effect of T6 Heat Treatment on Mechanical Properties of 7075 Al Alloy [ Vol.13, Issue 1 - Winter Year 2024]
  • Hasanabadi.Ali Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet [ Vol.12, Issue 1 - Winter Year 2023]
  • Hasanabadi.Ali Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology [ Vol.12, Issue 3 - Summer Year 2023]
  • Hasanabadi.Ali Path Optimization of Moving Object in Presence of Obstacles Using Messy Genetic Algorithm for N-dimensional Space [ Vol.11, Issue 3 - Summer Year 2022]
  • Hashemi.Javad Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit [ Vol.11, Issue 1 - Winter Year 2022]
  • Hashemi.Ramin Evaluation of Damage Problems in the Water Pump Components of an Air Compressor Cooling System: a Case Study [ Vol.5, Issue 3 - Summer Year 2016]
  • Hashemi.S. Jalal Numerical and Experimental Investigation of Thickness Distribution in Hydromechanical Deep Drawing Process of Square Parts [ Vol.10, Issue 2 - Spring Year 2021]
  • Hashemi.S. Jalal Investigation of the Effect of Different Forming Pressure Curves on Formability of AA1050 Tubes in Warm Hydroforming Process [ Vol.10, Issue 1 - Winter Year 2021]
  • hashemian.mohammad Effect of Different FGM Models on Creep Analysis of Thick-walled Cylindrical Pressure Vessel [ Vol.12, Issue 3 - Summer Year 2023]
  • Hashemzadeh.Majid The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [ Vol.9, Issue 3 - Summer Year 2020]
  • Hashemzadeh.Majid The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [ Vol.9, Issue 1 - Winter Year 2020]
  • Hassanzadeh Nemati.Nahid Performing a Calcium-Phosphate Layer on Porous NiTi Alloy for Using in Orthopedic Applications [ Vol.2, Issue 4 - Autumn Year 2013]
  • Hassanzadeh Nemati.Nahid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Hassanzadeh Nemati.Nahid The Effect of the Third Element on Corrosion Behavior and Phase Structure of Fe35Mn Alloy Fabricated by Spark Plasma Sintering (SPS) [ Vol.7, Issue 4 - Autumn Year 2018]
  • Hassanzadeh Nemati.Nahid Evaluating the Potential of Polycaprolactone/Heparinized Nano Fluoro Hydroxyapatite Composite Scaffolds for Advancing Bone Tissue Engineering: A Comprehensive Analysis of Biodegradability and Water Absorption [ Vol.13, Issue 1 - Winter Year 2024]
  • Hassanzadeh.Ezatollah Impact of FSP Tool Probe Shape on Reinforcing Particles Dispersion in the Piston Alloy Using CEL Approach [ Vol.11, Issue 4 - Autumn Year 2022]
  • Hassanzadeh.Ezatollah Analyzing Thermomechanical Characteristics: A Comparative Study of Stationary Shoulder FSW and Conventional FSW [ Vol.12, Issue 4 - Autumn Year 2023]
  • Hebatalrahman.Ahmed An Investigation of the Manufacturing Process, Structure, and Performance of the New Micro and Nano Thermoplastic-based Composites Prepared with Zeolite Filler [ Vol.11, Issue 1 - Winter Year 2022]
  • Hebatalrahman.Hebatalrahman Development of New Technique for Reverse Engineering by Microstructure Features Detection [ Vol.11, Issue 2 - Spring Year 2022]
  • Heidari.Ali Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation [ Vol.12, Issue 1 - Winter Year 2023]
  • Heidari.Ali The Computational Study of Number of Shot Particles and Distance Effects on Residual Stress and Mechanical Behavior of Ti-6Al-4V Alloy after Shot Peening Process: Molecular Dynamics Approach [ Vol.11, Issue 2 - Spring Year 2022]
  • Heidari.Shahab Study of the Impact of Supply Chain Sustainability Dimensions on Sustainable Competitive Advantage with the Mediating Role of Production Flexibility and Strategic Flexibility (Case Study: Dairy Industry of Fars Province) [ Vol.13, Issue 1 - Winter Year 2024]
  • Heidari.Shahin Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Heidari.Shahin An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 3 - Summer Year 2021]
  • Heidari.Shahin Numerical simulation of realistic Implants and implant prosthesis of molar teeth model by 3D Finite Element Analysis method during chewing cycle [ Vol.13, Issue 2 - Spring Year 2024]
  • Heidari.Shahin Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • Heidari.Shahin Study of Mechanical Properties of 7075 Aluminum Alloy Due to Particle Size Reduction due to Constrained Groove Pressing CGP Process [ Vol.10, Issue 1 - Winter Year 2021]
  • Heidari.Shahin Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 4 - Autumn Year 2021]
  • Hesampour.AbolfaZL A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [ Vol.5, Issue 1 - Winter Year 2016]
  • Heydari Beni.Mohsen Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • heydari vini.mohammad Using Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill [ Vol.3, Issue 2 - Spring Year 2014]
  • heydari vini.mohammad Using Artificial Neural Networks to Predict Rolling Force and Real Exit Thickness of Steel Strips [ Vol.3, Issue 3 - Summer Year 2014]
  • heydari vini.mohammad Numerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling [ Vol.2, Issue 4 - Autumn Year 2013]
  • heydari vini.mohammad A New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact [ Vol.3, Issue 4 - Autumn Year 2014]
  • heydari.mohammad Investigation of the Microscopic Aspect of the Stress Distribution in the Accumulative Roll Bonding Process Using the Slab Method [ Vol.5, Issue 4 - Autumn Year 2016]
  • heydari.mohammad Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force [ Vol.6, Issue 1 - Winter Year 2017]
  • Hojaji.Mohamad Design and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow [ Vol.4, Issue 1 - Winter Year 2015]
  • Honarpisheh.Mohammad Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [ Vol.8, Issue 3 - Summer Year 2019]
  • Honarpisheh.Mohammad The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [ Vol.8, Issue 2 - Spring Year 2019]
  • Honarpisheh.Mohammad Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process [ Vol.4, Issue 4 - Autumn Year 2015]
  • Honarpisheh.Mohammad Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [ Vol.5, Issue 4 - Autumn Year 2016]
  • Honarpisheh.Mohammad Numerical and Experimental Comparison of Flow Stress and the Effect of Microcylinder Topography in the Barreling Test: An Artificial Neural Network Model [ Vol.12, Issue 1 - Winter Year 2023]
  • Honarpisheh.Mohammad Investigation of ECAR Routes on Mechanical Properties of Explosive-Welded Al-Cu Bimetal [ Vol.3, Issue 4 - Autumn Year 2014]
  • hortamani.amir Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]
  • Hoseini.Pedram Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [ Vol.8, Issue 2 - Spring Year 2019]
  • Hosseinzadeh Lotfi.Farhad Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [ Vol.8, Issue 1 - Winter Year 2019]
  • Hosseinzadeh Samani.Bahram Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus [ Vol.4, Issue 2 - Spring Year 2015]
  • Hosseinzadeh Samani.Bahram Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production [ Vol.11, Issue 1 - Winter Year 2022]

J

  • Jabbari.Keyhan The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [ Vol.7, Issue 1 - Winter Year 2018]
  • Jafari Fesharaki.Javad A Heuristic Approach for Optimization of Gearbox Dimension [ Vol.7, Issue 2 - Spring Year 2018]
  • Jafari Fesharaki.Javad Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load [ Vol.6, Issue 3 - Summer Year 2017]
  • Jafari Nedoushan.Reza Finite Element Modeling and Experimental Study of the Spline Tube Forming [ Vol.4, Issue 1 - Winter Year 2015]
  • jafari.esmael The Recommend of Filler Metal to Increasing the Corrosion Resistance of Gas Pipeline [ Vol.9, Issue 3 - Summer Year 2020]
  • Jafari.Jaleel Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • Jafari.Javad Numerical and Analytical Investigation of a Cylinder Made of Functional Graded Materials under Thermo-Mechanical Fields [ Vol.5, Issue 3 - Summer Year 2016]
  • Jafari.Javad Stress Concentration Factor in a Functionally Graded Material Plate around a Hole [ Vol.6, Issue 1 - Winter Year 2017]
  • Jafarian Jam.Nathan Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [ Vol.5, Issue 1 - Winter Year 2016]
  • Jafarpour.Vahid Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique [ Vol.11, Issue 1 - Winter Year 2022]
  • Jaferi.Fatemeh An Approach Utilizing Epsilon-Constraint and NSGA-II for Circular Manufacturing Supply Chain Networks [ Vol.12, Issue 2 - Spring Year 2023]
  • Jalali Asbforoshani.Hossein Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]
  • Jaleel.Ashidsha A Solution for the Security Barrier of the Intelligent Manufacturing with Cloud Computing [ Vol.10, Issue 4 - Autumn Year 2021]
  • Jassim Al-Issawii.Qadarat Mohammad Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil [ Vol.12, Issue 4 - Autumn Year 2023]

K

  • Kämper.Jan-Hinrich Investigation of a Fully-automated Manufacturing Environment Realized through a Flexible Logistic System [ Vol.11, Issue 2 - Spring Year 2022]
  • Kafaei Kavoshian.Nazanin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Karami Khorramabadi.Mahdi Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil [ Vol.12, Issue 4 - Autumn Year 2023]
  • Karami Khorramabadi.Mahdi Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy [ Vol.13, Issue 1 - Winter Year 2024]
  • karami.bahman Simulation and Analysis of the New Brake System according to Changing of the Spring and Vertical Acceleration of the Wheels [ Vol.5, Issue 4 - Autumn Year 2016]
  • Karami.Mohammad Mehdi Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [ Vol.10, Issue 2 - Spring Year 2021]
  • karevan.ali Analyze the Effect of the Maintenance Activities on the Internet Sustainability by Using 2k Factorial Experiment Design [ Vol.7, Issue 2 - Spring Year 2018]
  • Karimi.Jafar Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Karimi.Jafar Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Karimian.Majid Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [ Vol.5, Issue 2 - Spring Year 2016]
  • Karimkhani.Behzad Analysis of Orthotic Insoles Manufacturing for Treating Flatfoot Using Smart Orthotic Insole in Comparison with Traditional Methods [ Vol.12, Issue 3 - Summer Year 2023]
  • Karimkhani.Behzad Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [ Vol.7, Issue 4 - Autumn Year 2018]
  • Kashisaz.Sara The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]
  • Kazazi.Mahdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • kazemi.ali Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation [ Vol.12, Issue 1 - Winter Year 2023]
  • kazemi.hamzeh Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies [ Vol.12, Issue 4 - Autumn Year 2023]
  • Kazemzadeh-Parsi.Mohammad Javad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Kazemzadeh-Parsi.Mohammad Javad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Kazerooni.Afshin Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Kebreyaeezade.Asghar Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints [ Vol.7, Issue 3 - Summer Year 2018]
  • Kermani.Ehsan An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Keshvari.Hamid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Khademizadeh.Hassan The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods [ Vol.6, Issue 2 - Spring Year 2017]
  • khajehpour.salar Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 4 - Autumn Year 2021]
  • Khajehpour.Salar Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss [ Vol.11, Issue 4 - Autumn Year 2022]
  • khakzar Bafruei.Morteza Development of Linguistic Rules Diagnosis of Failure in Centrifugal Pump for Use in Expert System [ Vol.4, Issue 2 - Spring Year 2015]
  • Khalaj.Gholamreza Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing [ Vol.11, Issue 4 - Autumn Year 2022]
  • Khaledan.Siyavash A Comparison of Job-shop and Group Technology Using Simulation by ARENA [ Vol.2, Issue 4 - Autumn Year 2013]
  • Khaledan.Siyavash A Comparison of Job-Shop and Group Technology Using Simulation by ARENA [ Vol.3, Issue 1 - Winter Year 2014]
  • Khalili.Khalil Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [ Vol.8, Issue 4 - Autumn Year 2019]
  • Khamedi.Ramin Investigation of the Effect of Ferrite Grain Size on Acoustic Emission Signals [ Vol.11, Issue 3 - Summer Year 2022]
  • Khamedi.Ramin Comparison of the Behavior of Martensitic and Ferrite Samples on Acoustic Emission Parameters [ Vol.11, Issue 4 - Autumn Year 2022]
  • khanaki.Hamid Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • khashei.mehdi Improving the Performance of Forecasting Models with Classical Statistical and Intelligent Models in Industrial Productions [ Vol.10, Issue 2 - Spring Year 2021]
  • Kheiralipour.Kamran Three Dimensional Model Reconstruction of a Cuboid Based on Stereo Vision [ Vol.8, Issue 4 - Autumn Year 2019]
  • Kheirkhahan.Payam Robust Fractional-order Control of Flexible-Joint Electrically Driven Robots [ Vol.7, Issue 1 - Winter Year 2018]
  • Kheirkhahan.Payam An Alternative Stability Proof for Direct Adaptive Function Approximation Techniques Based Control of Robot Manipulators [ Vol.7, Issue 2 - Spring Year 2018]
  • Kheirkhahan.Payam Robust Anti-Windup Control Design for PID Controllers–Theory and Experimental Verification [ Vol.6, Issue 3 - Summer Year 2017]
  • Kheirkhahan.Payam Robust Control of Electrically Driven Robots in the Task Space [ Vol.6, Issue 4 - Autumn Year 2017]
  • Khodsetan.Mohsen Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [ Vol.8, Issue 1 - Winter Year 2019]
  • Khorasani.Mohammad T. Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Khorasani.Mohammad T. Evaluating the Potential of Polycaprolactone/Heparinized Nano Fluoro Hydroxyapatite Composite Scaffolds for Advancing Bone Tissue Engineering: A Comprehensive Analysis of Biodegradability and Water Absorption [ Vol.13, Issue 1 - Winter Year 2024]
  • Khosravi.Mehdi Comparison of the Behavior of Martensitic and Ferrite Samples on Acoustic Emission Parameters [ Vol.11, Issue 4 - Autumn Year 2022]
  • Khosravi.Mehdi Investigation of the Effect of Ferrite Grain Size on Acoustic Emission Signals [ Vol.11, Issue 3 - Summer Year 2022]
  • Khosravian.Erfan Effect of Welding Processing Parameters on FSW of Aerospace Grade Aluminum Alloys [ Vol.13, Issue 1 - Winter Year 2024]
  • Khosravifard.Ali Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]
  • Khosrojerdi.Mohammad Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Kirshkov.Pavel An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]
  • Kolahdooz.Amin Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [ Vol.7, Issue 3 - Summer Year 2018]
  • Kolahdooz.Amin A Novel Optimization Approach Applied to Multi-Pass Turning Process [ Vol.6, Issue 2 - Spring Year 2017]
  • Kolahdooz.Amin An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA [ Vol.6, Issue 1 - Winter Year 2017]
  • Kolahdooz.Amin Gentle Survey on MIR Industrial Service Robots: Review & Design [ Vol.10, Issue 1 - Winter Year 2021]
  • Kolahdooz.Amin Gentle Survey on MIR Industrial Service Robots: Review & Design [ Vol.10, Issue 1 - Winter Year 2021]
  • Kolahdoozan.Mojtaba Simulation of a Microgripper with Electrothermal Actuator Using COMSOL Software Based on the Finite Element Method [ Vol.2, Issue 3 - Summer Year 2013]

L

  • Latifi Rostami.Seyyed Ali Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells [ Vol.7, Issue 3 - Summer Year 2018]
  • Liakov.Jasmin An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]
  • Lohmousavi.Mohsen Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [ Vol.5, Issue 1 - Winter Year 2016]
  • Loh-Mousavi.mohsen Effects of Colliding Particle Size and Velocity on Mechanical Properties of AZ31 after Surface Mechanical Attrition Treatment: Molecular Dynamics Simulation [ Vol.12, Issue 1 - Winter Year 2023]
  • Lotfi.Mohammad The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]

M

  • Mahammadi.Mehdi The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [ Vol.9, Issue 1 - Winter Year 2020]
  • Mahdieh.Mohammad Investigation of Steel Slabs Marker Robotic Arm Control Parameters in Noise and Disturbance Absence/Presence [ Vol.13, Issue 2 - Spring Year 2024]
  • Mahdieh.Mohammad A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Mahdieh.Mohammad Sajjad Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation [ Vol.11, Issue 2 - Spring Year 2022]
  • Mahdipour Jalilian.Maziar Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil [ Vol.12, Issue 4 - Autumn Year 2023]
  • Mahdipour Jalilian.Maziar Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy [ Vol.13, Issue 1 - Winter Year 2024]
  • mahmoud aghdami.ashkan Study of Johnson-Cook Model Comprehensiveness at Moderate Strain Rate and Inverse Analysis to Modify the Constitutive Parameters Using Cold Wire Drawing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Majidi.Mohammad Hossein Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • Mallahi Kolahi.Pouya Optimal Trajectory Planning for an Industrial Mobile Robot using Optimal Control Theory [ Vol.10, Issue 3 - Summer Year 2021]
  • Manafi.S. Comparison of ZAMAK 2 and ZAMAK 3 Alloys Produced by Powder Metallurgy Process [ Vol.10, Issue 3 - Summer Year 2021]
  • Mansouri.Ehsan A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [ Vol.9, Issue 4 - Autumn Year 2020]
  • mansouri.Hadi Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye [ Vol.8, Issue 3 - Summer Year 2019]
  • mansouri.Hadi Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017 [ Vol.11, Issue 3 - Summer Year 2022]
  • mansouri.Hadi The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process [ Vol.8, Issue 2 - Spring Year 2019]
  • Marzban.Mohammad Study the Effects of the Cryogenic Method Using Liquid Nitrogen on Fittings in Assembly Process [ Vol.12, Issue 2 - Spring Year 2023]
  • Meghdadi.Amir Homayoun The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [ Vol.5, Issue 2 - Spring Year 2016]
  • Mehrabi.Vahid Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Mesgar.Mohammad Study the Effects of the Cryogenic Method Using Liquid Nitrogen on Fittings in Assembly Process [ Vol.12, Issue 2 - Spring Year 2023]
  • Mirafzali.Seyyed Mohammad Bagher Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology [ Vol.12, Issue 3 - Summer Year 2023]
  • Mirmohammadi.Ali Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [ Vol.4, Issue 1 - Winter Year 2015]
  • mirtalaie.Hasan Simulation of Drug Release in a Polymer Screw [ Vol.11, Issue 4 - Autumn Year 2022]
  • mirtalaie.Hasan Analysis of Orthotic Insoles Manufacturing for Treating Flatfoot Using Smart Orthotic Insole in Comparison with Traditional Methods [ Vol.12, Issue 3 - Summer Year 2023]
  • Moarrefzadeh.Ali Investigating the Effect of Residual Stress on Fatigue Crack Propagation by Modified J-integral and Experimental Method [ Vol.12, Issue 1 - Winter Year 2023]
  • Mohammadi.Mehrdad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Mohammadi.Mehrdad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Mohammadi.Mohammad Simulation and Thermo-Mechanical Analysis of AA6063-T5 in FSW by FEM [ Vol.13, Issue 2 - Spring Year 2024]
  • MOHAMMADI.SHAHED Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms [ Vol.6, Issue 4 - Autumn Year 2017]
  • Mohammadi.Yones Nonlinear Buckling Analysis of Different Types of Porous FG Sandwich Beams with Temperature-Dependent [ Vol.12, Issue 4 - Autumn Year 2023]
  • Moharrami.Rasoul Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique [ Vol.11, Issue 1 - Winter Year 2022]
  • mokhtarian.ali Investigation of the Impact of the Alumina Powder Presence in Dielectric on Electrical Discharge Machining Parameters of A413 Aluminum Workpiece using Taguchi's Experiment Design, Signal-to-noise Analysis, and Total Normalized Quality Loss [ Vol.12, Issue 1 - Winter Year 2023]
  • mola alizade zavardehi.saber Study of the Impact of Supply Chain Sustainability Dimensions on Sustainable Competitive Advantage with the Mediating Role of Production Flexibility and Strategic Flexibility (Case Study: Dairy Industry of Fars Province) [ Vol.13, Issue 1 - Winter Year 2024]
  • molaie.majid Colloids: Applications and Remaining Challenges [ Vol.4, Issue 1 - Winter Year 2015]
  • Molla Ramezani.Navid Evaluation of the Cryogenic Effect on Friction Stir Processed AA7075/Si Matrix Nanocomposites [ Vol.13, Issue 1 - Winter Year 2024]
  • Molla Ramezani.Navid Experimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel [ Vol.6, Issue 3 - Summer Year 2017]
  • Montazerolghaem.Hamid Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts [ Vol.6, Issue 4 - Autumn Year 2017]
  • Montazerolghaem.Hamid Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method [ Vol.7, Issue 1 - Winter Year 2018]
  • Moradi.Ali The Computational Study of Number of Shot Particles and Distance Effects on Residual Stress and Mechanical Behavior of Ti-6Al-4V Alloy after Shot Peening Process: Molecular Dynamics Approach [ Vol.11, Issue 2 - Spring Year 2022]
  • Moradi.Alireza A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]
  • Moradi.Mahmoud Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • Moradi.Mahmoud Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [ Vol.5, Issue 2 - Spring Year 2016]
  • Moradi.Shohreh Ranking of Outsourcing Risks in Supply Chain of Automotive Industry Using Fuzzy AHP and Fuzzy Inference System [ Vol.8, Issue 1 - Winter Year 2019]
  • Moradlou.Hamid Implementation of Agile Manufacturing Principles in Small and Medium Enterprises (SMES) [ Vol.4, Issue 3 - Summer Year 2015]
  • Morady Gohareh.Mehdy A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [ Vol.9, Issue 4 - Autumn Year 2020]
  • Morady Gohareh.Mehdy System Engineering Implementation Process for Super-Systems [ Vol.7, Issue 1 - Winter Year 2018]
  • Mosaedi.Farid A Novel Optimization Approach Applied to Multi-Pass Turning Process [ Vol.6, Issue 2 - Spring Year 2017]
  • Mosavi.Sayed Ali Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [ Vol.5, Issue 2 - Spring Year 2016]
  • Mosayebi.Masoud Optimal Trajectory Planning for an Industrial Mobile Robot using Optimal Control Theory [ Vol.10, Issue 3 - Summer Year 2021]
  • Moshayedi.AtaJahangir Gentle Survey on MIR Industrial Service Robots: Review & Design [ Vol.10, Issue 1 - Winter Year 2021]
  • Moslemi Naeini.Hassan بررسی تجربی جوشکاری‌ مقاومتی نقطه‌ای ورق‌های فولادی با ضخامت نامشابه: مشخصه‌‌های دکمه‌ی جوش و رفتار شکست [ Vol.1, Issue 4 - Autumn Year 1389]
  • Motevasseli.Hesam Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]
  • Mousavi.Sayed Ali Thickness Measuring of Thin Metal by Non Destructive with Fuzzy Logic Control System [ Vol.4, Issue 4 - Autumn Year 2015]
  • Mousavi.Sayed Ali Design and Construction of Electromechanical Wrist Hand Orthosis with a Functional Interface [ Vol.7, Issue 4 - Autumn Year 2018]
  • Mozafari.Hamid Numerical and Experimental Analysis of Temperature Field, Deformation, and Residual Stress in Two-Stage Single-Pulse Sub-Powder Welding Joints [ Vol.13, Issue 2 - Spring Year 2024]

N

  • Naasr.Neda Numerical simulation of realistic Implants and implant prosthesis of molar teeth model by 3D Finite Element Analysis method during chewing cycle [ Vol.13, Issue 2 - Spring Year 2024]
  • Nadali.Abolghasem Computer-based Regressor-free Adaptive Control versus Direct Adaptive Fuzzy Control of the Robotic System [ Vol.8, Issue 3 - Summer Year 2019]
  • Nadali.Abolghasem Routing in a Wireless Multilayer Physical Network by Balanced Utilization Approach and Minimum Energy Using a Firefly Optimization Algorithm [ Vol.8, Issue 2 - Spring Year 2019]
  • najafi.Seyed esmaeil Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [ Vol.8, Issue 1 - Winter Year 2019]
  • Namazikhah.Shayan Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy [ Vol.5, Issue 4 - Autumn Year 2016]
  • Namin.Mahnaz Ahadzadeh Performance Evaluation of Banking Organizations Using the New Proposed Integrated DEA-BSC Model [ Vol.8, Issue 1 - Winter Year 2019]
  • Nasrollah.Amin A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites [ Vol.10, Issue 1 - Winter Year 2021]
  • Nazemosadat.Seyed Mohammad Reza Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts [ Vol.12, Issue 1 - Winter Year 2023]
  • Nazemosadat.Seyed Mohammad Reza Simulation and Thermo-Mechanical Analysis of AA6063-T5 in FSW by FEM [ Vol.13, Issue 2 - Spring Year 2024]
  • Nazemosadat.Seyed Mohammad Reza Comparing and Investigating the Effect of Input Parameters on External Parameters in Parts of Different Materials in EDM Operation Using Taguchi Method [ Vol.12, Issue 4 - Autumn Year 2023]
  • Nejah Adnan Jeddeh.Najwan Comparing and Investigating the Effect of Input Parameters on External Parameters in Parts of Different Materials in EDM Operation Using Taguchi Method [ Vol.12, Issue 4 - Autumn Year 2023]
  • Neshastegir Kashi.Amir The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method [ Vol.10, Issue 2 - Spring Year 2021]
  • Nikbakht.Mehrdad Relationship between Technology Management and Operational Performance in Manufacturing Companies [ Vol.6, Issue 4 - Autumn Year 2017]
  • Nikbakht.Mehrdad A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [ Vol.5, Issue 1 - Winter Year 2016]
  • Nikbakht.Mehrdad Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [ Vol.7, Issue 1 - Winter Year 2018]
  • Nikbakht.Mehrdad Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [ Vol.5, Issue 1 - Winter Year 2016]
  • Nikbakht.Mehrdad Cause and Effect Analysis of Risks of Refinery Developmental Turnkey Projects through System Dynamics Approach Case Study: Development Project of Third Distillation Unit and LPG (Liquefied Petroleum Gas) in Isfahan Oil Refinery [ Vol.6, Issue 2 - Spring Year 2017]
  • Nikbakht.Mehrdad Ranking of the Solutions of Reducing Electrical Energy Consumption in Isfahan Sepahan Cement Industry by Using Fuzzy TOPSIS Method [ Vol.8, Issue 2 - Spring Year 2019]
  • Nikbakht.Mehrdad Identification and Clustering Outsourcing Risks of Aviation Part- Manufacturing Projects in Aviation Industries Organization Using Kmeans Method [ Vol.7, Issue 4 - Autumn Year 2018]
  • Nikkhoo.Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Niknam.Seyed Ali The Effect of Artificial Aging Treatment and Lubrication Modes on the Cutting Force and the Chip Surface Morphology when Drilling Al-Si-Mg (A356) Cast Alloys [ Vol.7, Issue 1 - Winter Year 2018]
  • Nili Ahmad Abadi.Majid Study of the Impact of Supply Chain Sustainability Dimensions on Sustainable Competitive Advantage with the Mediating Role of Production Flexibility and Strategic Flexibility (Case Study: Dairy Industry of Fars Province) [ Vol.13, Issue 1 - Winter Year 2024]
  • nori.davood Investigation of Mass Magnetic Abrasive Finishing Process on Compressor Blades [ Vol.12, Issue 4 - Autumn Year 2023]
  • Nosouhi.Mehdi Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [ Vol.6, Issue 4 - Autumn Year 2017]
  • Nosouhi.Reza Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy [ Vol.8, Issue 3 - Summer Year 2019]
  • Nosouhi.Reza Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Nosouhi.Reza Experimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning [ Vol.5, Issue 4 - Autumn Year 2016]
  • Nourbakhsh-Samani.Seyedeh Parvaneh Organizational Agility and Knowledge Sharing Process in the Staffs of the Iran's Central Plateau Contractor Company [ Vol.6, Issue 3 - Summer Year 2017]
  • Nouri Hosseinabadi.Hossein Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning [ Vol.5, Issue 4 - Autumn Year 2016]

O

  • ordikhani.shahin Feature Selection in Big Data by Using the enhancement of Mahalanobis–Taguchi System; Case Study, Identifiying Bad Credit clients of a Private Bank of Islamic Republic of Iran [ Vol.7, Issue 3 - Summer Year 2018]
  • Ordikhani.Shahin Solving Re-entrant No-wait Flexible Flowshop Scheduling Problem; Using the Bottleneck-based Heuristic and Genetic Algorithm [ Vol.7, Issue 2 - Spring Year 2018]

P

  • Paktinat.Hossein Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling [ Vol.6, Issue 4 - Autumn Year 2017]
  • Pandey.Ankit Analysis of Wrinkled Composite Membrane of Inflatable Antenna Using Shape Memory Alloy [ Vol.11, Issue 4 - Autumn Year 2022]
  • pasamehr.fatemeh Prioritization of Lean-production Components with Fuzzy Network Analysis: A Case Study (Sam Electric Co.) [ Vol.8, Issue 1 - Winter Year 2019]
  • Paygane.gholamhasan Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [ Vol.8, Issue 1 - Winter Year 2019]
  • Payganeh.Gholamhasan Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes [ Vol.4, Issue 4 - Autumn Year 2015]
  • Poorshaban.Reza The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [ Vol.9, Issue 3 - Summer Year 2020]
  • Pouladsaz.Kamran Machinability evaluation of Titanium alloy in Laser Assisted Turning [ Vol.2, Issue 3 - Summer Year 2013]
  • Poursafar.Amin Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061 [ Vol.8, Issue 3 - Summer Year 2019]

R

  • Rabiezadeh.Amin Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing [ Vol.5, Issue 3 - Summer Year 2016]
  • Rabiezadeh.Amin Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit [ Vol.11, Issue 1 - Winter Year 2022]
  • Rabiezadeh.Amin Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • raeiesifard.hamed Raman Analysis of DLC Nanostructure Coating on AL 6061-T6 Made by DC Pulsed- PACVD [ Vol.11, Issue 3 - Summer Year 2022]
  • Rahimi Asiabaraki.Hossein Impact of FSP Tool Probe Shape on Reinforcing Particles Dispersion in the Piston Alloy Using CEL Approach [ Vol.11, Issue 4 - Autumn Year 2022]
  • Rahimi Asiabaraki.Hossein Analyzing Thermomechanical Characteristics: A Comparative Study of Stationary Shoulder FSW and Conventional FSW [ Vol.12, Issue 4 - Autumn Year 2023]
  • Rahimi.Mojtaba Investigation of the Impact of the Alumina Powder Presence in Dielectric on Electrical Discharge Machining Parameters of A413 Aluminum Workpiece using Taguchi's Experiment Design, Signal-to-noise Analysis, and Total Normalized Quality Loss [ Vol.12, Issue 1 - Winter Year 2023]
  • Rahimzadeh.Ayub A Mathematical Model for Determining the Optimal Production Lot Size of Multiple Products on a Machine [ Vol.8, Issue 4 - Autumn Year 2019]
  • Rahimzadeh.Ayub A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]
  • Rahmani.Ali Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [ Vol.4, Issue 1 - Winter Year 2015]
  • Rahmani.Ali Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [ Vol.8, Issue 2 - Spring Year 2019]
  • Rahmani.Azam Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418 [ Vol.5, Issue 2 - Spring Year 2016]
  • Rahmani.Faezad Numerical and Experimental Investigation of Thickness Distribution in Hydromechanical Deep Drawing Process of Square Parts [ Vol.10, Issue 2 - Spring Year 2021]
  • Rahmani.Mohsen Temperature-dependent Vibration Analysis of Clamped-free Sandwich Beams with Porous FG Core [ Vol.10, Issue 4 - Autumn Year 2021]
  • Rahmani.Mohsen Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]
  • Rahmani.Mohsen Nonlinear Buckling Analysis of Different Types of Porous FG Sandwich Beams with Temperature-Dependent [ Vol.12, Issue 4 - Autumn Year 2023]
  • Rahmati.Sadegh Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Rahnama.Saeed Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [ Vol.6, Issue 3 - Summer Year 2017]
  • Ramezani.Mohammad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Ranjbarzadeh.Ramin The Analysis of Experimental Process of Production, Stabilizing and Measurement of the Thermal Conductivity Coefficient of Water/Graphene Oxide as a Cooling Nanofluid in Machining [ Vol.5, Issue 2 - Spring Year 2016]
  • rasouli.seyedalireza Investigation of Mass Magnetic Abrasive Finishing Process on Compressor Blades [ Vol.12, Issue 4 - Autumn Year 2023]
  • Rastitalab.Abdolreza An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 3 - Summer Year 2021]
  • Rastitalab.Abdolreza Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures [ Vol.10, Issue 4 - Autumn Year 2021]
  • Razfar.Mohammad reza Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments [ Vol.3, Issue 1 - Winter Year 2014]
  • Rezaee Hajideh.Mojtaba Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets [ Vol.6, Issue 4 - Autumn Year 2017]
  • rezaee.behzad An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Riahi.Ahmad The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]

S

  • Saadat.Mohammad Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [ Vol.9, Issue 4 - Autumn Year 2020]
  • Saadat.Mohammad Dynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace [ Vol.8, Issue 4 - Autumn Year 2019]
  • Saadat.Mohammad Anti-swing Fuzzy Controller Design for a 3D Overhead Crane [ Vol.4, Issue 2 - Spring Year 2015]
  • Saadat.Mohammad CAD Model and Finite Element Analysis of a Knee Brace for General Applications [ Vol.12, Issue 2 - Spring Year 2023]
  • sadegh amalnik.Morteza Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining [ Vol.4, Issue 1 - Winter Year 2015]
  • sadegh amalnik.Morteza Controlling Electrochemical Machining By Using a Fuzzy Logic Approach [ Vol.6, Issue 2 - Spring Year 2017]
  • sadegh amalnik.Morteza Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing for Abrasive Water Jet Machining [ Vol.4, Issue 2 - Spring Year 2015]
  • sadegh amalnik.Morteza Design of Computer Integrated Manufacturing System for Irankhodro Auto Industry [ Vol.3, Issue 4 - Autumn Year 2014]
  • sadegh amalnik.Morteza Development of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM [ Vol.3, Issue 2 - Spring Year 2014]
  • sadegh amalnik.Morteza Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System [ Vol.6, Issue 3 - Summer Year 2017]
  • Safari.Aref A Novel Transformation Watershed Image Segmentation Model in Digital Elevation Maps Processing [ Vol.9, Issue 3 - Summer Year 2020]
  • Safavipour.Mohammad Reza Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool [ Vol.10, Issue 1 - Winter Year 2021]
  • Safavipour.Mohammad Reza Experimental Study of the Effect of Different Spindle Speeds and Feed Rates in Dry Machining on a Brittle Material [ Vol.10, Issue 4 - Autumn Year 2021]
  • Sahai.Ankit Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research [ Vol.10, Issue 3 - Summer Year 2021]
  • Saharkhiz.Eshagh Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods [ Vol.13, Issue 2 - Spring Year 2024]
  • Sahebali.Sahebali Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy [ Vol.2, Issue 3 - Summer Year 2013]
  • Sajadi.Seyed Mojtaba Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [ Vol.10, Issue 2 - Spring Year 2021]
  • Sajajid.Frahad Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer [ Vol.6, Issue 1 - Winter Year 2017]
  • Sajjady.Sayed Ali Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure: Cohesive Element Method [ Vol.6, Issue 3 - Summer Year 2017]
  • Sajjady.Sayed Ali The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500 [ Vol.7, Issue 2 - Spring Year 2018]
  • saki entezami.saeed Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder [ Vol.4, Issue 3 - Summer Year 2015]
  • Salari.Mahdi Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys [ Vol.9, Issue 3 - Summer Year 2020]
  • Salari.Mehdi Effect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels [ Vol.3, Issue 3 - Summer Year 2014]
  • Salari.Mehdi Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree [ Vol.8, Issue 4 - Autumn Year 2019]
  • Salehi.Farshid Production Optimization on the Flow Shop Scheduling Problem: A Simulation Study [ Vol.10, Issue 2 - Spring Year 2021]
  • sarami.Elyas Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017 [ Vol.11, Issue 3 - Summer Year 2022]
  • Sarikhani.Moslem Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles [ Vol.12, Issue 3 - Summer Year 2023]
  • Sayfi.Pirouz Identification and Ranking Green Supplier Selection Criteria Using One-Sample T-Test and FANP Methods: A Case Study for Petrochemical Industry [ Vol.5, Issue 1 - Winter Year 2016]
  • Shabgard.Mohammad Reza پیش بینی صافی سطح قطعات تنگستن کاربایدی (CO10%-WC) درفرایند EDM با استفاده ازالگوریتم فازی [ Vol.1, Issue 1 - Winter Year 1389]
  • Shadmanpoor.Arash Cause and Effect Analysis of Risks of Refinery Developmental Turnkey Projects through System Dynamics Approach Case Study: Development Project of Third Distillation Unit and LPG (Liquefied Petroleum Gas) in Isfahan Oil Refinery [ Vol.6, Issue 2 - Spring Year 2017]
  • Shafiei.S.M.M. Raman Analysis of DLC Nanostructure Coating on AL 6061-T6 Made by DC Pulsed- PACVD [ Vol.11, Issue 3 - Summer Year 2022]
  • Shahbazi Dastjerdi.Mojtaba Investigation of the Impact of the Alumina Powder Presence in Dielectric on Electrical Discharge Machining Parameters of A413 Aluminum Workpiece using Taguchi's Experiment Design, Signal-to-noise Analysis, and Total Normalized Quality Loss [ Vol.12, Issue 1 - Winter Year 2023]
  • Shahbazi Karami.Javad Numerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming [ Vol.8, Issue 1 - Winter Year 2019]
  • Shahbazi Karami.Javad Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [ Vol.5, Issue 2 - Spring Year 2016]
  • Shahbazi Karami.Javad Experimental Investigation and Numerical Simulation of the Mechanical Behavior of a Novel Honeycomb Core Sandwich Panels Formed by Hydroforming Process [ Vol.5, Issue 3 - Summer Year 2016]
  • Shahbazi Karami.Javad Computer Aided Design of the Tube Hydroforming and Dual Hydroforming Processes [ Vol.4, Issue 4 - Autumn Year 2015]
  • Shahbazi Karami.Javad مقایسه‌ی فرآیند هیدروفرمینگ لوله‌های تک‌لایه، دولایه و سه‌لایه با استفاده از شبیه‌سازی اجزای ‌محدود [ Vol.1, Issue 4 - Autumn Year 1389]
  • shahhosseini.masoud Task-space Control of Robots Using an Adaptive Taylor Series Uncertainty Estimator Revisited [ Vol.7, Issue 4 - Autumn Year 2018]
  • shahhosseini.masoud Impedance Control of Robots Using Voltage Control Strategy Revisited [ Vol.7, Issue 1 - Winter Year 2018]
  • Shahin.Arash An Approach Utilizing Epsilon-Constraint and NSGA-II for Circular Manufacturing Supply Chain Networks [ Vol.12, Issue 2 - Spring Year 2023]
  • Shahmoradi.Mohsen Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754 [ Vol.5, Issue 2 - Spring Year 2016]
  • Shahrajabian.Hamzeh Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites [ Vol.5, Issue 3 - Summer Year 2016]
  • Shahrajabian.Hamzeh The Mechanical Properties of PA6/NBR/clay/CaCO3 Hybrid Nanocomposites [ Vol.10, Issue 1 - Winter Year 2021]
  • Shariati.M Assessment of Third‌-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory [ Vol.11, Issue 1 - Winter Year 2022]
  • Sharifi Shirmardi.Sayyed Nabi Al-Din Effects of Shot Peening Angle and Time on Microstructure and Wear Behavior of AZ31 Alloy [ Vol.12, Issue 2 - Spring Year 2023]
  • Shekarchizadeh.Ahmadreza Relationship between Technology Management and Operational Performance in Manufacturing Companies [ Vol.6, Issue 4 - Autumn Year 2017]
  • Shekarchizadeh.Ahmadreza Relationship Between Operational Performance in Industrial Manufacturing Companies with Approaches of Innovation, Quality, Efficiency and Productivity [ Vol.7, Issue 1 - Winter Year 2018]
  • Shirani Bidabadi.E. An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Shirneshan.Alireza Desiging, Part Selecting and Fabrication Procedure of the Vaccum Section of a Leaf Vacuum Shredder Machine [ Vol.2, Issue 2 - Spring Year 2013]
  • Shirneshan.Alireza Determination the Mechanical Stress on the Cutter Bar of the Harvesting Combine by Abaqus [ Vol.4, Issue 2 - Spring Year 2015]
  • Shirneshan.Alireza Assessment the Wear Properties of Biodiesel-diesel Blends with the Addition of Copper Oxide Nanoparticles [ Vol.8, Issue 4 - Autumn Year 2019]
  • Shirouyehzad.Hadi A Method for Ranking, Assessment and Evaluation of Sustainability Factors in Project [ Vol.5, Issue 1 - Winter Year 2016]
  • Shirouyehzad.Hadi A Comparison of Job-shop and Group Technology Using Simulation by ARENA [ Vol.2, Issue 4 - Autumn Year 2013]
  • Shirouyehzad.Hadi Analyzing Indexes of Agile Reverse logistics Using Interpretive Structural Modeling Approach [ Vol.3, Issue 3 - Summer Year 2014]
  • Shishesaz.Mohammad استخراج روابط سینماتیکی و تحلیل اجزای محدود تنش در پوسته‌ی انعطاف‌پذیر جعبه دنده‌ی هارمونیک درایو [ Vol.1, Issue 3 - Summer Year 1389]
  • Shojaei.Saeed Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [ Vol.4, Issue 1 - Winter Year 2015]
  • shooshtari.narges Numerical and Experimental Comparison of Flow Stress and the Effect of Microcylinder Topography in the Barreling Test: An Artificial Neural Network Model [ Vol.12, Issue 1 - Winter Year 2023]
  • Sobbouhi.Karim Implementation and Simulation of an Automated PLC Hydraulic System for a Double-acting Actuator Using a Proportional Valve [ Vol.11, Issue 3 - Summer Year 2022]
  • Sobhani.Siavash Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite [ Vol.5, Issue 1 - Winter Year 2016]
  • Soleimanimehr.Hamid Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]
  • Soleimanimehr.Hamid An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Soleimanimehr.Hamid A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites [ Vol.10, Issue 1 - Winter Year 2021]
  • Soleimanimehr.Hamid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • soltani.mehrdad Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM) [ Vol.5, Issue 2 - Spring Year 2016]
  • sousani.hasan Mechanical Properties of Concrete Containing Tire Rubber Particles toward Constant Development [ Vol.2, Issue 4 - Autumn Year 2013]
  • Steiki.Mohammadreza Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation [ Vol.11, Issue 2 - Spring Year 2022]

T

  • Taghizadeh.Behnam The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [ Vol.7, Issue 3 - Summer Year 2018]
  • Taghizadeh.Mojtaba Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel [ Vol.5, Issue 2 - Spring Year 2016]
  • Tahami.Seyed Mohammad Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss [ Vol.11, Issue 4 - Autumn Year 2022]
  • Tahami.Seyed Rasoul Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Taki.Kimia Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production [ Vol.11, Issue 1 - Winter Year 2022]
  • Talebi Anaraki.Ali Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process [ Vol.5, Issue 1 - Winter Year 2016]
  • Tasouji Hassanpour.Saeed Scheduling Problem of Virtual Cellular Manufacturing Systems (VCMS); Using Simulated Annealing and Genetic Algorithm based Heuristics [ Vol.3, Issue 4 - Autumn Year 2014]
  • Tavabe.Adel Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts [ Vol.12, Issue 1 - Winter Year 2023]
  • tavakoli.morteza Task-space Control of Electrically Driven Robots [ Vol.7, Issue 4 - Autumn Year 2018]
  • Toulani.Saeed Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow [ Vol.3, Issue 4 - Autumn Year 2014]
  • Towsyfyan.Hossein A Novel Optimization Approach Applied to Multi-Pass Turning Process [ Vol.6, Issue 2 - Spring Year 2017]

V

  • Vahdati.Mehdi Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80 [ Vol.7, Issue 3 - Summer Year 2018]
  • Vakili.Ali A Study of Abrasive Media Effect on Deburring in Barrel Finishing Process [ Vol.8, Issue 3 - Summer Year 2019]
  • Vasegh.Raha An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]
  • Vasili.Mohammadreza An Approach Utilizing Epsilon-Constraint and NSGA-II for Circular Manufacturing Supply Chain Networks [ Vol.12, Issue 2 - Spring Year 2023]

X

  • Xu.Ge Gentle Survey on MIR Industrial Service Robots: Review & Design [ Vol.10, Issue 1 - Winter Year 2021]

Y

  • Yari.Rasoul Yari Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [ Vol.8, Issue 2 - Spring Year 2019]
  • Yasemi.Hesameddin Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint [ Vol.7, Issue 4 - Autumn Year 2018]
  • yasini.shiva Fabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications [ Vol.4, Issue 4 - Autumn Year 2015]
  • Yazdani Nogarani.Mehran Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets [ Vol.8, Issue 1 - Winter Year 2019]
  • Yousefi.Afshin A New Hybrid Prediction Reduces the Bullwhip Effect of Demand in a Three-level Supply Chain [ Vol.7, Issue 3 - Summer Year 2018]

Z

  • Zamani.Saeid Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm [ Vol.12, Issue 2 - Spring Year 2023]
  • Zarei.Esmaeil Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods [ Vol.13, Issue 2 - Spring Year 2024]
  • Zarei.Yunus Simulation and Thermo-Mechanical Analysis of AA6063-T5 in FSW by FEM [ Vol.13, Issue 2 - Spring Year 2024]
  • Zarepour.Hamid The Effect of Al2O3-MWCNT Hybrid Nanofluid on Surface Quality in Grinding of Inconel 600 [ Vol.7, Issue 3 - Summer Year 2018]
  • Zarepour.Hamid Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient [ Vol.8, Issue 2 - Spring Year 2019]
  • Zarepour.Hamid An Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining [ Vol.5, Issue 4 - Autumn Year 2016]
  • Zeidi.Seyed Mohammad Javad Numerical Approach Toward Calculation of Vibration Characteristics of the Multi Axles Truck Using Lagrange Method [ Vol.4, Issue 1 - Winter Year 2015]
  • zeidi.seyedmohammadjavad Study of Vibration Specifications of a Three-axle Truck Using Lagrange Method [ Vol.8, Issue 2 - Spring Year 2019]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]