List of Articles FEM

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
  M.H Yas H Shahrani Korani F Zare Jouneghani
  10.22034/jsm.2019.584854.1394
  20.1001.1.20083505.2020.12.1.6.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
  A Kherraf Y Tamerabet M Brioua R Benbouta
  10.22034/jsm.2019.668618
  20.1001.1.20083505.2019.11.4.12.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Study of the Effect of an Open Transverse Crack on the Vibratory Behavior of Rotors Using the h-p Version of the Finite Element Method
  F Ahmed H Abdelhamid B Brahim S Ahmed
  10.22034/jsm.2019.664228
  20.1001.1.20083505.2019.11.1.13.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
  20.1001.1.20083505.2019.11.4.10.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Numerical Analysis of the Effect of External Circumferential Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM – Elastic-Plastic Behavior
  H Salmi Kh EL Had H EL Bhilat A Hachim
  10.22034/jsm.2019.1882104.1511
  20.1001.1.20083505.2020.12.3.10.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Stiffeners Mechanical Effect Analysis by Numerical Coupling
  R Naceur Bouharkat A Sahli S Sahli
  10.22034/jsm.2019.1876608.1482
  20.1001.1.20083505.2020.12.2.15.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - ANSYS Modeling for Bone Reconstruction by Using Hybrid Nano Bio Composite
  J Sattar Kashan S Mahmood Ali
  10.22034/jsm.2020.1864464.1411
  20.1001.1.20083505.2020.12.4.4.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Static Analysis and Fatigue of DHS Implants to Treatment Femoral and Intertrochanteric Neck Fractures Using Ti6Al4V and SS316 Alloys, A Finite Element Analysis
  A Shokrgozar Navi S Etemadi Haghighi M Haghpanahi A Momeni
  10.22034/jsm.2021.1921808.1675
  20.1001.1.20083505.2022.14.3.4.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Selection of Optimal Tool Geometry for the Production of Brass Wires Using the FSBE Method
  Mostafa  Akbari Parviz  Asadi Hossein  Rahimi Asiabaraki
  https://doi.org/10.60664/jsm.2023.1081714
  20.1001.1.20083505.2023.15.1.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
  M Shariati Y Faradjian H Mehrabi
  20.1001.1.20083505.2016.8.1.9.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Numerical Simulation of Semi-Elliptical Axial Crack in Pipe Bend Using XFEM
  K Sharma I.V Singh B.K Mishra S.K Maurya
  20.1001.1.20083505.2014.6.2.7.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Displacements and Stresses in Pressurized Thick FGM Cylinders with Varying Properties of Power Function Based on HSDT
  M Ghannad H Gharooni
  20.1001.1.20083505.2012.4.3.2.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Effect of Compressive Residual Stress on the Corner Crack Growth
  M.H Gozin M Aghaie-Khafri
  20.1001.1.20083505.2013.5.4.1.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
  A Al-Khazraji S.A Amin S.M Ali
  20.1001.1.20083505.2018.10.2.9.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - On the Analysis of FGM Beams: FEM with Innovative Element
  M Zakeri A Modarakar Haghighi R Attarnejad
  20.1001.1.20083505.2016.8.2.9.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Crack Interaction Studies Using XFEM Technique
  K Sharma
  20.1001.1.20083505.2014.6.4.7.7