Buckling Analyses of Rectangular Plates Composed of Functionally Graded Materials by the New Version of DQ Method Subjected to Non-Uniform Distributed In-Plane Loading

Subject Areas : Engineering

R Kazemi Mehrabadi ¹ , V.R Mirzaeian ²

1 - Department of Mechanical Engineering, Islamic Azad University, Arak Branch
2 - Iran University of Science and Technology

Received: 2009-02-27 Accepted : 2009-04-26 Published : 2009-04-30

Keywords: Differential quadrature method, Buckling, Functionally Graded Materials, Rectangular plates, Non-uniform distributed in-plane loading,

Abstract :

In this paper, the new version of differential quadrature method (DQM), for calculation of the buckling coefficient of rectangular plates is considered. At first the differential equations governing plates have been calculated. Later based on the new version of differential quadrature method, the existing derivatives in equation are converted to the amounts of function in the grid points inside the region. Having done that, the equation will be converted to an eigen value problem and the buckling coefficient is obtained. Solving this problem requires two kinds of loading: (1) unaxial half-cosine distributed compressive load and (2) uni-axial linearly varied compressive load. Having considered the answering in this case and the analysis of the effect of number of grid points on the solution of the problem, the accuracy of answering is considered, and also the effect of power law index over the buckling coefficient is investigated. Finally, if the case is an isotropic type, the results will be compared with the existing literature.

References:

[1] Brush D.O., Almroth B.O., 1975, Buckling of Bars, Plates and Shells, McGraw Hill, New York.

[2] Leissa A.W., 1992, Review of recent developments in laminated composite plate buckling analysis, Composite Material Technology 45: 1-7.

[3] Tauchert T.R., 1991, Thermally induced flexure, buckling and vibration of plates, Applied Mechanics Review 44(8): 347-360.

[4] Biswas P., 1976, Thermal buckling of orthotropic plates, ASME Journal of Applied Mechanics 98:361-363.

[5] Reddy J.N., Wang C.M., Kitipornachi S., 2001, Axisymmetric bending of functionally graded circular annular plates, European Journal of Mechanics A/Solid 20: 841-855.

[6] Bellman R.E., Casti J., 1971, Differential quadrature and long-term integration, Journal of Mathematical Analysis and Applications 34: 235-238.

[7] Wang X., Gu H., Liu B., 1996, On buckling analysis of beams and frame structures by differential quadrature elemnt method, ASCE Proceedings of Engineering Mechanics 1: 382-385.

[8] Liu G.R., Wu T.Y., 2001, Vibration analysis of beam using the generalized differential quadrature rule and domain decomposition, Journal of Sound and Vibration 246: 461-481.

[9] Bert C.W., Devarakonda K.K., 2003, Buckling of rectangular plates subjected to nonlinearly distributed in-plane loading, International Journal of Solids and Structures 40:4097-4106.

[10] Sherbourne A.N., Pandey M.D., 1991, Differential quadrature method in the buckling analysis of beams and composite plates, Computers and Structures 40:903-913.

[11] Bert C.W., Wang X., Striz A.G., 1993, Differential quadrature for static and free vibration analyses of anisotropic plates, International Journal of Solids and Structures 30(13): 1737-1744.

[12] Wang X., Bert C.W., 1993, A new approach in applying differential quadrature to static and free vibrational analyses of beams and plates, Journal of Sound and Vibration 162(3): 566–72.

[13] Wang X., Gu H., Liu B., On buckling analysis of beams and frame structures by the differential quadrature element method. Proceedings of Engineering Mechanics 1: 382-385.

[14] Wang X., 1995, Differential quadrature for buckling analysis of laminated Plates, Computers and Structures 57(4): 715-719.

[15] Wang X., Tan M., Zhou Y., 2003, Buckling analyses of anisotropic plates and isotropic skew plates by the new version differential quadrature method, Thin-Walled Structures 41: 15-29.

[16] Wang X., Shi X., Applications of differential quadrature method for solutions of rectangular plates subjected to non-uniformly distributed in-plane loadings (unpublished manuscript).

[17] Wang X., Wang X., 2006, Differential quadrature buckling analyses of rectangular plates subjected to non-uniform distributed in-plane loadings, Thin-walled Structures 44: 837-843.

[18] Koizumi M., 1997, FGM activities in Japan, Composites 28(1-2): 1-4.

[19] Wang X., Liu F., Wang X., Gan L., 2005, New approaches in application of differential quadrature method to fourth- order differential equations, Communications In Numerical Methods In Engineering 21: 61-71.

[20] Praveen G.N., Reddy J.N., 1998, Nonlinear Transient thermoelastic analysis of functionally graded ceramic-metal plates, International Journal of Solids and Structures 35(33): 4457-4476.

[21] Van der Neut A., 1958, Buckling caused by thermal stresses, high temperature effects in aircraft structures. AGARDO graph 28: 215–47.

[22] Benoy M.B., 1969, An energy solution for the buckling of rectangular plates under non-uniform in-plane loading, Aeronautical Journal 73: 974-977.

[23] Young W.C., Budynas R.G., 2002, Roark’s Formulas for Stress & Strain, McGraw-Hill, New York, USA, Seventh Edition.