مدیریت زیست محیطی کسب و کار محصولات بتن خرده لاستیکیCRC (Crumb Rubber Concrete) حاصل از بازیافت ضایعات لاستیک
محورهای موضوعی : مدیریت محیط زیستمحمد کربلائی کریمی 1 , اکرم الملوک لاهیجانیان 2 * , امیرهومن حمصی 3 , علی محمدی 4
1 - دانشجوی دکترای مدیریت محیط زیست، گروه مدیریت محیط زیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران.
2 - دانشیار گروه مدیریت محیط زیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران. *(مسوول مکاتبات)
3 - استاد گروه مدیریت محیط زیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران.
4 - استادیار گروه مدیریت محیط زیست، دانشکده منابع طبیعی و محیط زیست، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران.
کلید واژه: بازیافت, بتن خرده لاستیکی, مدل تصمیم گیری چند معیارهMCDM , مدل کسب و کار, نرم افزار EC,
چکیده مقاله :
زمينه و هدف: گسترش صنعت ساخت و ساز و مشکلات فراوان زیست محیطی، حرکت به سوی فناوری بازیافت در مدیریت بهینه مصالح ساختمانی را هدف گرفته است. مزایای اقتصادی و زیست محیطی صنعت بازیافت باعث شده است، پژوهشگران آزمایش های متعددی جهت بهینه سازی مصالح نوین بازیافتی انجام دهند. در همین راستا ضایعات لاستیک به عنوان یکی از معضلات زیست محیطی مورد توجه خاص قرار گرفته است. بدین منظور در تحقیق حاضر، مدیریت بازیافت صنعتی محصولات با مدل سازی به روش تصممیم گیری چندمعیاره، جهت انتخاب برترین گزینه های محصولات بتن خرده لاستیکی مورد بررسی قرار گرفته است.
روش بررسی: در مرحله نخست طبق نظر خبرگان و اساتید محیط زیست و مهندسی عمران، از بین 23 معیار برتر در 5 گروه عوامل اقتصادی، زیست محیطی، فنی، مدیریت و عایق بندی انتخاب شدند. در مرحله دوم با اخذ پرسشنامه اول براساس طیف لیکرت بروش آماری با نرم افزار SPSS ، تعداد 17 معیار و 5 گزینه تاثیرگذار انتخاب شدند. سپس در مرحله سوم، مدل سازی به روش تصمیم گیری چند معیاره به روش تحلیل سلسله مراتبی AHP با نرم افزار EC براساس داده های پرسشنامه دوم جهت رتبه بندی نهایی محصولات بتنی مورد استفاده قرار گرفت.
یافته ها: اولویت بندی نهایی محصولات بتن بر اساس نتایج، بترتیب اوزان برابر 235/0 و 219/0و 196/0 و 179/0 و 17/0 تعیین شد و به ترتیب بتن خرده لاستیک آسفالتی، گاردریل، پانل پارتیشن در اولویتهای برتر قرار گرفتند.
بحث و نتيجه گيری: بر اساس نتایج حاصل از تحقیق در مراحل سه گانه، به جمیع جهات موارد بررسی اعم از مطالعات تجربی و پرسشنامه مرحله اول و مدلسازی، در خصوص برترین محصولات، محصول بتن خرده لاستیک آسفالتی (Crumb Rubber Asphalt Concrete) به عنوان برترین محصول انتخاب و بر اساس مدل کسب و کار مشخص گردید، امکان تولید محصول در مقیاس صنعتی وجود دارد.
Background and Objective: The expansion of the construction industry and many environmental problems have aimed to move towards recycling technology in the optimal management of building materials. The economic and environmental benefits of the recycling industry have made researchers conduct numerous experiments to optimize new recycled materials. In this regard, rubber waste has received special attention as one of the environmental problems. For this purpose, in the current research, the management of industrial recycling of products has been examined by modeling using multi-criteria decision-making method, in order to select the best options for crumb rubber concrete products
Material and Methodology: In the first stage, according to the opinion of experts and professors of environmental and civil engineering, among the 23 best criteria in 5 groups of economic, environmental, technical, management and insulation factors were selected. In the second stage, by taking the first questionnaire based on the Likert scale of statistical analysis with SPSS software, 17 criteria and 5 influential options were selected. Then, in the third stage, multi-criteria decision-making modeling using AHP hierarchical analysis method with EC software was used based on the data of the second questionnaire for the final ranking of concrete products.
Findings: Based on the results, the final prioritization of concrete products was determined with weights equal to 0.235, 0.219, 0.196, 0.179, and 0.17, respectively, and asphalt crumb concrete, guardrail, and partition panel were placed in the top priorities.
Discussion and Conclusion: Based on the results of the research in three stages, in all aspects of the investigation, including experimental studies and the first stage questionnaire and modeling, regarding the best products, Crumb Rubber Asphalt Concrete product as The best product was selected and based on the business model, it was possible to produce the product on an industrial scale.
1. Rao, C., Mallela, J., Darter, M.I., and Titus-Glover, L. (2007). Concrete Mix Properties to Optimize Concrete Pavement Performance Using the MEPDG, Proceedings for International Conference on Optimizing Paving Concrete Mixtures and Accelerated Concrete Pavement Construction and Rehabilitation, Atlanta, GA.
2. DEVELOPMENT AND IMPLEMENTATION OF ARIZONA DEPARTMENT OF TRANSPORTATION (ADOT) PAVEMENT MANAGEMENT SYSTEM (PMS) - Final Report 494
3. Karbalaei Karimi M., 2013. Concrete and Concretology, Javedan Kherad Publication, Tehran, Iran. (In Persian)
4. A Review on the Effect of Crumb Rubber Addition to the Rheology of Crumb Rubber Modified Bitumen, Mohd RasdanI brahim, Herda Yati Katman, Centre for Transportation Research, Faculty of Engineering, University of Malaya, Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2013, ArticleID415246.
5. Goodship, V., 2007. Introduction to plastics recycling, Movahed, S., Ferdosi University Publication, Tehran, Iran. (In Persian)
6. Abdoli, M., 2016. Waste management in world cities Research and planning of Tehran city Publication. Tehran, Iran (In Persian)
7. Noorpur, A., 2016. An article on waste management and recycling, Research and planning of Tehran city Publication, Tehran, Iran, pp.22-35. (In Persian)
8. Anonymous., 2020. Recycling of waste in Petrotajhiz Company, Available online at: www.tajhizpro.ir
9. Anonymous., 2020. Recycling of waste tires in Country, Available online at: www.iran-lastic.ir .
10. Anonymous., 2020.Plastic processing and composite in Greenmantra Technologies, Available online at: www.greenmantra.com
11. Anna Tibaijuka, Executive Director UN-Habitat- solid waste management in the worlds cities.
12. Pola Bandini, PhD, 2011, Rubberized Asphalt Concrete Paverments in New Mexico. Department of civil Engineering New Mexico University.
13. Masimo Losa, 2012, Crumb Rubber Modifed Asphalt Concrete for Low Noise surfaces, University of Pisa, Department of Civil Engineering, Construction and Building Materials, Volume 22, pp.1368-1376.
14. S. Mavridou, 2010, Integration of end - of - life tires in the life cycle of road construction, Recycling and Reuse of Used tiers, Dundee, pp.281-298.
15. H.K. Sebaaly,2009, Fatique Properties of Rubber Modified Asphalt Mixtures,2nd workshop on four-point Bending, Pais,2009, University of Minho. ISBN 978-972-8692-42-1.
16. P. Anbazhagan, 2011, Laboratory Characterization of tyre crumbs soil Mixture for Developing Low Cost Damping Materials, International Journal of earth Science and Engineering, ISSN 0974-5904, Volume04, No 06SPL, OCTOBR 2011, pp63-66.
17. joe o. cano, phd,1989, the phoenix Experience using Asphalt rubber, prepared for presentation at national seminar on Asphalt rubber Kansas City, october30-31,1989.
18. MehdiKhalili, Rheological properties of modified crumb rubber asphalt binder and selecting the best modified binder using AHP method, Case Studies in Construction Materials, Volume 11, December 2019, e00276
19. Murat Karacasuaa, Arzu Erb, 2012, Energy efficiency of rubberized asphalt concrete under low temperature conditions. portation research record no.1681, Transportation research Board, Washington, DC, pp.10-18
20. Mona Nourelhuda, phD, 2012, Asphalt Rubber Pavement Construction, Msc Thesis, The Sudan university of Sience and Technology, Khartoum, Sudan
21. N. Oikonomou, 2007, Asphalt Rubber Usage Guide, The use of waste tyre rubber in civil engineering, chapter 9
22. Aein, V., 2013. Application of recycled rubber in road construction. Ava Publication, Tehran, Iran. (In Persian)
23. Choobchian, sh., 2016. Multi criteria decision making: Approach of Analytical Hierarchy Process and application of swot analysis, Isba Publication, Tehran, Iran. (In Persian)
24. Aghaei, Sh., 2006. Rational decision making with Expert choice software. Arkan danesh Publication, Tehran, Iran. (In Persian)
25. Karimi, R., 2015. Statistical analysis guide with SPSS software, Hengam Publication, Tehran, Iran (In Persian).
26. Molanapoor, R., 2016. SPSS Software, Ati negar Publication, Tehran, Iran, pp30–59. (In Persian)
27. kirk, l., 2013. SPSS software guide, Teymoorzadeh Publication, Tehran, Iran. (In Persian)
28. Amiri, M., 2016. Multi Criteria Decision Making. Kian Publication, Tehran, Iran. (In Persian)
29. Asgharpoor, M., 2011. Multi Criteria Decision Making. Tehran University Publication, Tehran, Iran. (In Persian)