Expert System Approach for Manufacturability Evaluation of Nd: YAG Laser Beam Machining Process
الموضوعات :
1 - Department of Mechanical Engineering,
University of Qom, Qom, Iran
الکلمات المفتاحية: Manufacturing, Expert System, Design, ND: YAG Laser,
ملخص المقالة :
In this paper, an expert system (ES) is developed for manufacturability evaluation of ND:YAG laser in computer based concurrent engineering. The expert system evaluates machining cycle time and cost in less than 30 seconds. Experimental verification and validity of the expert system is carried out. The results of expert system are compared with the results of experimental laser beam machine. Results are presented. The results of the expert system show machining cycle time and cost for expert system is about 10 percent less than the experimental one. In addition material is selected by the expert system. It gives valuable information to help designers and manufacturing engineers to improve design and manufacturing. The expert system links with design feature library, material database and laser beam machine database. The design specification is acquired through a feature based approach. Material database holds attributes of more than 10 types of materials. Laser beam machine database holds attributes of 2 types of laser beam machine and machine parameters. For each design feature, the expert system provides information needed for manufacturability evaluation and estimation of machining cycle time and cost. It can be used for design and manufacturing optimization. The expert system can be used as an advisory system for designers and manufacturing engineers. It can be used as a teaching program for new laser operators in computer based concurrent engineering environment.
[1] Jain V. K., Kuo, C.-P., “An Investigation of Laser-Assisted Machining of Al2O3 Ceramics Planning”, International Journal of Machine T[1], Advanced Machining Processes, Allied Publishers Pvt. Limited, New Delhi, India, 2005.
[2] Meijer, J., “Laser Beam Machining (LBM), State of the art and New Opportunities”, Journal of Materials Processing Technology, Vol. 149, No. 1–3, 2004. pp. 2-17.
[3] Norikazu, T., Shigenori Y., and Masao, H., “Present and Future of Lasers for Fine Cutting of Metal Plate”, Journal of Materials Processing Technology 62, 1996, pp. 309–314.
[4] Meijer, J., “Laser Beam Machining (LBM), State of the art and New Opportunities”, Journal of Materials Processing Technology 149, 2004, pp. 2–17.
[5] Sundar, J. K. S., Joshi, S. V., “Laser Cutting of Materials, Centre for Laser Processing of Materials”, International Advance Research Centre for Powder Metallurgy and New Materials, Hyderabad, 2009.
[6] Pham, D. T., Dimov S. S. and Petkov, P. T., “Laser Milling of Ceramic Components”, International Journal of Machine Tools and Manufacture 47, 2007, pp. 618–626.
[7] Tsai C. H., Chen, H.-W., “Laser Milling of Cavity in Ceramic Substrate by Fracture-Machining Element Technique”, Journal of Materials Processing Technology 136, 2003, pp. 158–165.
[8] Pham, D. T., Dimov, S. S., Petkov P. V. and Dobrev, T., “Laser Milling as a ‘rapid’ Micromanufacturing Process”, Proceedings of the I MECH E Part B. Journal of Engineering Manufacture, Vol. 218, Vol. 1, 2004, pp. 1–7.
[9] Qi, L., Wang, Y., Yang, L., “Study of Nd: YAG Pulsed Laser Milling Al2O3 Ceramic in Water and Air Condition”, International Technology and Innovation Conference, Hangzhou, China, November 6–7, 2006, pp. 489-493.
[10] Yadava, V., Jain V. K and Dixit, P. M., “Temperature Distribution During Electro-Discharge Abrasive Grinding”, Machining Science and Technology, An International Journal 6, 1, 2002, pp. 97–127.
[11] Rozzi, J. C., Pfefferkorn, F. E., Shin Y. C. and Incropera, F. P., “Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics”, ASME Journal of Manufacturing Science and Engineering 122, 2000 , pp. 666–670.
[12] Lei, S., Shin, Y. C. and Incropera, F. P., “Experimental Investigations of Thermo-Mechanical Characteristics in Laser-assisted Machining of Silicon Nitride Ceramics”, ASME Journal of Manufacturing Science and Engineering 123, 2001, pp. 639–646.
[13] Wang, Y., Yang L. J. and Wang, N. J., “An Investigation of Laser-Assisted Machining of Al2O3 Particle Reinforced Aluminum Matrix Composites”, Journal of Materials Processing Technology 129, 2002, pp. 268–272.
[14] Singh, R., Melkote, S. N., “Characterization of a Hybrid Laser-Assisted Mechanical Micromachining (LAMM) Process for a Difficult-to-Machine Material”, International Journal of Machine Tools and Manufacture 47, 2007, pp. 1139–1150.
[15] Zheng, H. Y., Huang, H., “Ultrasonic Vibration-Assisted Femtosecond Laser Machining of Microholes”, Journal of Micromechanics and Microengineering 17, Vol. 8, 2007, pp. 58–61.
[16] Yue, T. M., Chan, T. W., Man, H. C and Lau, W. S., “Analysis of Ultrasonic-Aided Laser Drilling using Finite Element Method”, Annals of CIRP 45 (1), 1996, pp. 169–172. [18] E.S.W. Leung,
[17] Yung W. K. C., Lee, W. B., “A Study of Micro-Yias Produced by Laser-Assisted Seeding Mechanism in Blind Via Hole Plating of Printed Circuit Board”, International Journal of Advanced Manufacturing Technology 24, 2004, pp. 474–484.
[18] Kuar A. S., Dhara, S. K. and Mitra, S., “Multi-Response Optimisation of Nd: YAG Laser Micro-Machining of Die Steel using Response Surface Methodology”, International Journal of Manufacturing Technology and Management, Vol. 21, No. 1-2, 2010, pp. 17–29.
[19] Sharma, A., Yadava, V. and Rao, R., “Optimization of Kerf Quality Characteristics During Nd: YAG Laser Cutting of Nickel Based Superalloy Sheet for Straight and Curved Cut Profiles”, Optics and Lasers in Engineering, Vol. 48, No. 9, 2010, pp. 915–925.
[20] Biswas, R., Kuar, A. S., Sarkar, and Mitra, S., “A Parametric Study of Pulsed Nd: YAG Laser Micro-Drilling of Gamma-Titanium Aluminide”, Optics and Laser Technology, Vol. 42, No. 1, 2010, pp. 23–31.
[21] Kibria, G., Doloi, B., and Bhattacharyya, B., “Experimental Analysis on Nd: YAG Laser Micro-Turning of Alumina Ceramic”, International Journal of Advanced Manufacturing Technology, Vol. 50, No. 5–8, 2010, pp. 643–650.
[22] Biswas, R., Kuar, A. S , Biswas, S. K. and Mitra, S., “Effects of Process Parameters on Hole Circularity and Taper in Pulsed Nd: YAG Laser Microdrilling of Tin-Al2O3 Composites”, Materials and Manufacturing Processes, Vol. 25, No. 6, 2010, pp. 503–514.
[23] Biswas, R., Kuar, A. S., Biswas, S. K. and Mitra, S., “Characterization of Hole Circularity in Pulsed Nd: YAG Laser Micro-Drilling of TiN-Al2O3 Composites”, International Journal of Advanced Manufacturing Technology, Vol. 51, No. 9–12, 2010, pp. 983–994.
[24] Panda, S., Mishra, D., and Biswal, B. B., “Determination of Optimum Parameters with Multi-Performance Characteristics in Laser Drilling—a Grey Relational Analysis Approach”, International Journal of Advanced Manufacturing Technology, Vol. 54, No. 9–12, 2011, pp. 957–967.
[25] Sibalija, T. V., Petronic, S. Z., Majstorovic, V. D., Prokic-Cvetkovic, R, and Milosavljevic, A., “Multi-Response Design of Nd: YAG Laser Drilling of Ni-Based Superalloy Sheets using Taguchi's Quality Loss Function, Multivariate Statistical Methods and Artificial Intelligence”, International Journal of Advanced Manufacturing Technology, Vol. 54, No. 5–8 , 2011, pp. 537–552.
[26] Karaboga, D., Basturk, B., “Artificial Bee Colony (ABC) Optimization Algorithm for Solving Onstrained Optimization Problems”, in Foundations of Fuzzy Logic and Soft Computing, Vol. 4529, Springer, Berlin, Germany, 2007, pp. 789–798.
[27] Karaboga, D., Basturk, B., “A Powerful and Efficient Algorithm for Numerical Function Optimization: Artificial Bee Colony (ABC) Algorithm”, Journal of Global Optimization, Vol. 39, No. 3, 2007, pp. 459–471.
[28] Voisey, K. T., Cheng C. F. and Clyne, T. W., “Quantification of Melt Ejection Phenomena During Laser Drilling”, Materials Research Society 617, 2000, pp. J5.6.1–J5.6.7.
[29] Grevey, D. F., Desplats, H., “Comparison of the Performance Obtained with a YAG Laser Cutting According to the Source Operation Mode”, Journal of Material Processing Technology 42, 1994, pp. 341–348.
[30] Tahmouch, G., Meyrueis, P., and Grandjean, P., “Cutting by a High power Laser at a Long Distance without an Assist Gas for Dismantling”, Optics and Laser Technology 29, 6, 1997, pp. 307–316.
[31] Chen T.-C., Darling, R. B, “Parametric Studies on Pulsed Near Ultraviolet Frequency Tripled Nd: YAG Laser Micromachining of Sapphire and Silicon”, Journal of Materials Processing Technology 169, 2005, pp. 214–218.
[32] Quintero, F., Pou, J., Fernandez, J. L., Doval, A. F., Lusquinos, F. M. Boutinguiza, M., Soto, R., and Amor, M. P., “Optimization of an Off-axis Nozzle for Assist Gas Injection in Laser Fusion Cutting”, Optics and Lasers in Engineering 44, 2006, pp. 1158–1171.
[33] Lau, W. S., Lee, W. B., “Pulsed Nd: YAG Laser Cutting of Carbon Fibre Composite Materials”, Annals of CIRP 39 1, 1992, pp. 179–182.
[34] Lau, W. S., Yue, T. M. Lee T. C. and. Lee, W. B., “Un-Conventional Machining of Composite Materials”, Journal of Materials Processing Technology 48, 1995, pp. 199–205.
[35] Rao, B. T., Kumar, H. and Nath, A. K., “Processing of Concretes with a High Power CO2 Laser”, Optics and Laser Technology 37, 2005, pp. 348–356.
[36] Chen, S.-L., “The Effects of High-Pressure Assistant-Gas Flow on High-Power CO2 Laser Cutting”, Journal of Material Processing Technology 88, 1999, pp. 57–66.
[37] Ghany, K. A., Newishy, M., “Cutting of 1.2 mm Thick Austenitic Stainless Steel Sheet using Pulsed and CW Nd: YAG Laser”, Journal of Material Processing Technology 168, 2005, pp. 438–447.
[38] Thawari, G., Sundar, J. K. S, Sundararajan, G. and Joshi, S. V., “Influence of Process Parameters During Pulsed Nd: YAG Laser Cutting of Nickel-Base Superalloys”, Journal of Materials Processing Technology 170, 2005, pp. 229–239.
[39] Bandyopadhyay, S., Sundar, J. K. S. Sundarrajan, G. and Joshi, S. V., “Geometrical Features and Metallurgical Characteristics of Nd: YAG Laser Drilled Holes in Thick IN718 and Ti–6Al–4V Sheets”, Journal of Materials Processing Technology 127, 2002, pp. 83–95.
[40] Tuersley, I. P., Hoult, T. P., Tony, P. and Pashby, I. R., “Nd-YAG Laser Machining of SiC Fibre/Borosilicate Glass Composites, Part II. The Effect of Process Variables”, Composites Part A 29A, 1998, pp. 955–964.
[41] Vitez, Z. I., “Laser Processing of Adhesives and Polymeric Materials for Microelectronics Packaging Applications”, Proceedings of the 4th IEEE International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing 2000, pp. 289–295.
[42] Chen, S.-L., “The Effects of High-Pressure Assistant-Gas Flow on High-Power CO2 Laser Cutting”, Journal of Material Processing Technology 88, 1999, pp. 57–66.
[43] Rajaram, J. S. Ahmad and Cheraghi, S. H., “CO2 Laser Cut Quality of 4130 Steel”, International Journal of Machine Tools and Manufacture 43, 2003, pp. 351-358.
[44] Li, L., Sobih, M. and Crouse, P. L., “Striation-Free Laser Cutting of Mild Steel Sheets”, Annals of CIRP 56, 1, 2007, pp. 193–196.
[45] Kruusing, A., Leppavuori, S., Uusimaki, A. Petretis B. and Makarova, O., “Micromachining of Magnetic Materials”, Sensors and Actuators 74, 1999, pp. 45–51.
[46] Kuar, A. S., Doloi, B. and Bhattacharyya, B., “Experimental Investigations on Nd: YAG Laser Cutting of Silicon Nitride”, International Journal of Manufacturing and Management 2–4, 2005, pp. 181–191.
[47] Tsai, C.-H., Chen, H.-W., “Laser Cutting of Thick Ceramic Substrates by Controlled Fracture Technique”, Journal of Materials Processing Technology 136, 2003, pp. 166–173.
[48] Rajaram, J. S. Ahmad and Cheraghi, S. H., “CO2 Laser Cut Quality of 4130 Steel”, International Journal of Machine Tools and Manufacture 43, 2003, pp. 351-358.
[49] Zhang, G. F., Zhang, B. Z., Deng H. and Chen, J. F., “An Experimental Study on Laser Cutting Mechanisms of Polycrystalline Diamond Compacts”, Annals of CIRP 56 ,1, 2007, pp. 201–204.
[50] Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J. Anderson B., and Williams, P., “Effect of Beam Angle on HAZ, Recast and Oxide Layer Characteristics in Laser Drilling of TBC Nickel Superalloys”, International Journal of Machine Tools and Manufacture 46, 15, 2006, pp. 1972–198
[51] Sadegh Amalnik, M., McGeough, J. A., “An Intelligent System for Manufacturability Evaluation of Design for Electrochemiocal Machining”, Journal of Material Processing Technology, Vol. 61, 1996, pp 130-139
[52] Sadegh Amalnik, M., Hofy, H. El. and McGeough, J. A. “An Intelligent System for Manufacturability Evaluation of Design for Wire-Electroeurosion Dissolusion Machining”, Journal of Material Processing Technology, Vol. 79, 1998, pp. 155-162.
[53] Boothroyd, G., Dewhurst, P. and Knight, W., “Product Design for Manufacturingand Assembly”, Marcel Dekker, New York, 1994
[54] The Cambridge Materials Selector (CMS), Version 2.0, 1994 (Granta Design Limited).
