Study of the Early Development Factors of Failure in Valves of Reciprocating Compressors by Experimental and Numerical Simulation
الموضوعات :
Mostafa Sayahbadkhor
1
(Department of Engineering,
University of Eyvanekey, Iran)
Ali Mozafari
2
(Masters student at Malek Ashtar University)
Alireza Naddaf Oskouei
3
(Department of Engineering,
Imam Hossein University, Iran)
الکلمات المفتاحية: One–Way Valve, Failure, numerical simulation, Reciprocating Compressor, Experimental Test,
ملخص المقالة :
Nowadays most of reciprocating compressors have one - way valves that act by difference pressure between behind and front of valves. In this article, experimental and numerical studying of one - way valves in reciprocating compressors was done. In this experimental tests, one – way valve with two different materials for rings; stainless steel with the material number 1.5022 and sign 38si6, and carbon-peek composite, were used. Numerical simulation for one-way valves with identical characteristics of experimental tests was done by CFX 5.7.1 and Ansys workbench 9.1. Experimental tests showed that life of carbon-peek composite ring was more than stainless steel. The most important cause of failure in the stainless steel ring was inappropriate distribution of forces due to the springs below the ring. Another common cause of failure in these valves was the stresses on walls in the location of springs that approved by numerical simulation. Difference in reaction of one - way valves in opening and closeing was another cause of failure because they were different in thermal expansion coefficient, thickness and diameter of carbon-peek composite and stainless steel rings. Appropriate thickness of rings determined by flow equation. The results obtained from numerical simulations have a good agreement with experimental tests.
[1] Gravdahl, J. T., Egeland, O., and Vatland, S. O., Drive Torque Actuation Surge Control of Centrifugal Compressor, Journal of Engineering, Vol. 38, No. 11, 2002, pp. 1881-1893, 10.1016/S0005-1098(02)00113-9.
[2] Jia, X., Zhao, B., and Peng, X., FSI Model of Valve Motion and Pressure Pulsation for Investigating Thermodynamic Process and Internal Flow Inside a Reciprocating Compressor, Applied Thermal Engineering, Vol. 131, 2018, pp. 998-1007, 10.1016/j.applthermaleng.2017.11.151.
[3] Bloch, H. P., Godse, A., Compressors and Modern Process Applications, John Wiley & Sons, Inc., Hoboken, New Jersey, 2006, pp. 3-12, 13: 978-0-471-72792-7.
[4] Foremann, S., Compressor Valves and Unloaders for Reciprocating Compressors–an OEM’s Perspective, Dresser-Rand, Painted Post, New York, 1999.
[5] Arztmann, R., Operation and Maintenance of Different valve types, Translated and reprinted from Conference Paper 6, Workshop Reciprocating Compressors. Rheine., Germany, Oct. 2002.
[6] Tierean, M., Baltes, L., Thermal Behavior of Valve Rings During Operation in Compressors, Bulletin of the Transilvania University of Brasov, Vol. 12, No. 47, Series A, 2005, pp. 297- 302.
[7] Michal, V., Roman, G., Modeling Reciprocating Compressor Valve Dynamics, In AIP Conference Proceedings, Vol. 1889, No. 1, 2017, pp. 020049, 10.1063/1.5004383.
[8] Khoshnevis, A. B., Barzanooni, V., and Vahidi, M., Characteristics of the Related Wake of Linear Compressor by Hot-Wire Anemometer, Int J of Advanced Design and Manufacturing Technology, Vol. 7, No. 2, 2014, pp. 89-98.
[9] Tierean, M., Baltes, L., Design of Valves Used in Reciprocating Compressors, Proceedings of the 5th WSEAS International Conference on APPLIED and THEORETICAL MECHANICS (MECHANICS '09), 2009, pp. 138-143.
[10] Taler, J., Duda, P., Solving Direct and Inverse Heat Conduction Problems, Springer Science & Business Media, New York, America, 2010, pp. 270–275, Chaps. 10, 13.
[11] Brun, K., G. Nored, M., S. Gernentz, R., and Platt. J., Reciprocating Compressor Valve Plate Life and Performance Analysis, Gas Machinery Conference, Covington, Kentucky, 2005, pp. 1–15.
[12] Wilke, C. R., A Viscosity Equation for Gas Mixtures, Journal of Chemical Physics, vol. 18, 1950, pp. 517-519, DOI. 10.1063/1.1747673.
[13] Horinek, A., The Reliable and Efficient Ring Valve, https://www.hoerbiger.com/en-2/pages/64, December, 2017.
[14] Deffenbaugh, M. D., J. A., Smalley, Advanced Reciprocating Compression Technology (ARCT), U.S. Department of Energy National Energy Technology Laboratory, San Antonio, Texas, USA, 2005.
[15] Woollatt, D., Factors Affecting Reciprocating Compressor Performance, Hydrocarbon Processing, Vol. 72, No. 6, 1993.
[16] Saatchi, A., Idriss, H., Key to Steel (Translator), 2rd ed, Arkan, Isfahan, Iran, 2005, pp. 290–335.
[17] Pederson, J., Finite Element Analysis of Carbon Fiber Composite Ripping using ABAQUS, Clemson University, South Carolina, USA, 2008, pp.11.
