Adapting OEE and Total Productive Maintenance (TPM) to Improve Machine Performance
الموضوعات : Maintenance PlanningRendiyatna Ferdian 1 , Didit Damur Rochman 2 , Tiaradia Ihsan 3
1 - Department of Industrial Engineering, Widyatama University, Bandung, Indonesia
2 - Department of Industrial Engineering, Widyatama University, Bandung, Indonesia
3 - Department of Industrial Engineering, Widyatama University, Bandung, Indonesia
الکلمات المفتاحية: Improve, Manufacturing, Milling Machine, Overall Equipment Effectiveness (OEE), Total Productive Maintenance (TPM),
ملخص المقالة :
This study aims to evaluate the effectiveness of milling machines at PT X, a strategic defense and security equipment manufacturer in Indonesia, by adapting the Overall Equipment Effectiveness (OEE) and Total Productive Maintenance (TPM). The purpose of this research is to identify key factors contributing to production inefficiencies, and to propose improvement strategies. The methodology employed combines direct observation, production log analysis, and structured interviews with operators and supervisors. Data collection focused on three key dimensions of OEE: availability, performanceand quality. Data were cross-verified with machine logbooks and operator feedback to ensure accuracy. OEE values were calculated, and the Six Big Losses framework was applied to pinpoint the major sources of inefficiency. The findings revealed that the average OEE of the milling machine was 47.65%, significantly below the industry benchmark of 85%. Availability remained relatively high at 96.12%, but performance and quality lagged, with a 25.28% rejection/rework rate and frequent minor stoppages contributing to prolonged cycle times. Speed Losses and Quality Losses were identified as the most critical issues, including up to 41.95% idle time in certain months and a defect rate of 18.63%. The study concludes that PT X must prioritize productive maintenance, supported by gradual and realistic implementation steps, to reduce unplanned downtime and improve machine performance. Additional strategies include automation of setup processes, enhanced quality control mechanisms, operator training, and real-time monitoring systems. By adopting these measures, PT X can improve OEE, reduce production costs, and strengthen its competitiveness in the manufacturing sector.
[1] M. A. Kalwar, A. N. Wassan, M. A. Khan, M. H. Wadho, S. A. Shaikh, and B. A. Memon, “Application of Overall Equipment Effectiveness In Increasing Productivity: Case Of Textile Company,” WPOM-Work. Pap. Oper. Manag., vol. 16, pp. 1–32, Jan. 2025, doi: 10.4995/wpom.21168.
[2] R. Setiawan, Aslam, Zaky Prasetyo, Zufaiz Ikmal Marhan, Diana Nabila Agustin, and Indra Setiawan, “Aplikasi Metode Overall Equipment Effectiveness di Industri Manufaktur: Literature Review,” Ind. Inov. J. Tek. Ind., vol. 14, no. 2, pp. 161–170, July 2024, doi: 10.36040/industri.v14i2.5851.
[3] Arifin, I. Tama, and Y. Sumantri, “Analysis the Effectiveness of CNC Turning Machines Type Xtra 420 using the Overall Equipment Method Effectiveness (OEE),” J. Eng. Manag. Ind. Syst., vol. 11, no. 1, pp. 46–53, May 2023, doi: 10.21776/ub.jemis.2023.011.01.5.
[4] A. S. F. Mayfi, N. I. Supardi, and A. Puspawan, “Maintenance dan Inspection pada Runner Turbin,” Rekayasa Mek., vol. 6, no. 2, pp. 77–82, Oct. 2022, doi: 10.33369/rekayasamekanika.v6i2.25460.
[5] I. W. A. Widyarsa and A. Bahatmaka, “Pengaruh Variasi Maintenance Axial Fan Cooling Tower di PT. Geo Dipa Energy Dieng,” J. Inov. Mesin, vol. 4, no. 2, pp. 26–35, Oct. 2022, doi: 10.15294/jim.v4i2.64958.
[6] Y. Liu, H.-Z. Huang, and T. Jiang, “Selective Maintenance Modelling and Optimization,” in Selective Maintenance Modelling and Optimization, in Springer Series in Reliability Engineering. , Cham: Springer International Publishing, 2023, pp. 1–29. doi: 10.1007/978-3-031-17323-3_1.
[7] I. Crăciun, I. Mehmet, and C. G. Dumitraş, “Study on the Implementation of Maintenance Policies in Industrial Engineering,” Bull. Polytech. Inst. Iași Mach. Constr. Sect., vol. 68, no. 2, pp. 9–24, June 2022, doi: 10.2478/bipcm-2022-0011.
[8] A. K. S. Jardine, D. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics implementing condition-based maintenance,” Mech. Syst. Signal Process., vol. 20, no. 7, pp. 1483–1510, Oct. 2006, doi: 10.1016/j.ymssp.2005.09.012.
[9] M. A. Rasyid and T. Sukmono, “Maximizing Machine Efficiency in Indonesia’s Noodle Industry,” Procedia Eng. Life Sci., vol. 7, pp. 571–580, Mar. 2024, doi: 10.21070/pels.v7i0.1530.
[10] A. K. Wardhani, O. Novareza, and P. Purnami, “Efektivitas Peralatan dan Total Produtive Maintenance (TPM): Review,” Conf. Innov. Appl. Sci. Technol. CIASTECH, vol. 6, no. 1, p. 674, Dec. 2023, doi: 10.31328/ciastech.v6i1.5365.
[11] A. Samadhiya and R. Agrawal, “Total productive maintenance and sustainability performance: resource-based view perspective,” Benchmarking Int. J., vol. 31, no. 7, pp. 2177–2196, July 2024, doi: 10.1108/BIJ-10-2022-0635.
[12] N. E. Triana and S. A. Lesmana, “Total Productive Maintenance (TPM) Implementation to ImproveMachine Efficiency,” Int. J. Eng. Res. Adv. Technol., vol. 09, no. 07, pp. 01–13, 2023, doi: 10.31695/IJERAT.2023.9.7.1.
[13] I. Manaldi, “Analisis Pengukuran Efektivitas Peralatan Menggunakan Metode Overall Equipment Effectiveness Analisis Pengukuran Efektivitas Peralatan Menggunakan Metode Overall Equipment Effectiveness,” J. Teknol., vol. 14, no. 2, Dec. 2024, doi: 10.35134/jitekin.v14i2.112.
[14] A. T. Kirana and W. Widiasih, “Analisis Perhitungan Overall Equipment Effectiveness (OEE) untuk Meningkatkan Efisiensi Mesin Haloong (Studi Kasus: PT Benteng Api Technic, Gresik),” J. Tekst. J. Keilmuan Dan Apl. Bid. Tekst. Dan Manaj. Ind., vol. 7, no. 1, pp. 59–68, June 2024, doi: 10.59432/jute.v7i1.89.
[15] S. Yalagi, Deepashri, and C. R. Naik, “Overall Equipment Effectiveness,” Int. J. Eng. Res. Adv. Technol. IJERAT, vol. 2, no. 1, pp. 521–528, 2016.
[16] M. Braglia, M. Frosolini, and F. Zammori, “Overall equipment effectiveness of a manufacturing line (OEEML): An integrated approach to assess systems performance,” J. Manuf. Technol. Manag., vol. 20, no. 1, pp. 8–29, Dec. 2008, doi: 10.1108/17410380910925389.
[17] J. A. Garza-Reyes, “From measuring overall equipment effectiveness (OEE) to overall resource effectiveness (ORE),” J. Qual. Maint. Eng., vol. 21, no. 4, pp. 506–527, Oct. 2015, doi: 10.1108/JQME-03-2014-0014.
[18] L. D. C. Corrales, M. P. Lambán, M. E. Hernandez Korner, and J. Royo, “Overall Equipment Effectiveness: Systematic Literature Review and Overview of Different Approaches,” Appl. Sci., vol. 10, no. 18, p. 6469, Sept. 2020, doi: 10.3390/app10186469.
[19] J. A. Garza‐Reyes, S. Eldridge, K. D. Barber, and H. Soriano‐Meier, “Overall equipment effectiveness (OEE) and process capability (PC) measures: A relationship analysis,” Int. J. Qual. Reliab. Manag., vol. 27, no. 1, pp. 48–62, Jan. 2010, doi: 10.1108/02656711011009308.
[20] E. T. Prasetio and A. Oktora, “Evaluation of The Effectiveness of Die Casting Machines Using Overall Equipment Effectiveness (OEE),” J. Teknol. Dan Manaj., vol. 22, no. 1, pp. 99–106, Feb. 2024, doi: 10.52330/jtm.v22i1.239.
[21] A. Tayal, N. S. Kalsi, M. K. Gupta, D. Y. Pimenov, M. Sarikaya, and C. I. Pruncu, “Effectiveness Improvement in Manufacturing Industry; Trilogy Study and Open Innovation Dynamics,” J. Open Innov. Technol. Mark. Complex., vol. 7, no. 1, p. 7, Mar. 2021, doi: 10.3390/joitmc7010007.
[22] R. Wudhikarn, “Implementation of the overall equipment cost loss (OECL) methodology for comparison with overall equipment effectiveness (OEE),” J. Qual. Maint. Eng., vol. 22, no. 1, pp. 81–93, Mar. 2016, doi: 10.1108/JQME-12-2011-0001.
[23] M. A. Rahima, A. Mail, and A. Padhil, “Analisis Overall Equipment Effectiveness (OEE) pada Mesin Pencacah Tongkol Jagung di PT Multindo Anugerah Perkasa,” J. Rekayasa Proses Dan Ind. Terap., vol. 2, no. 1, pp. 01–09, Dec. 2023, doi: 10.59061/repit.v2i1.535.
[24] C. Edwin and W. M. N. S. Daud, “Improving Production System Performance Using Overall Equipment Effectiveness,” Int. J. Ind. Manag., vol. 9, pp. 74–90, Jan. 2021, doi: 10.15282/ijim.9.0.2021.5957.
