Seismic Performance Enhancement of Heritage Adobe Vaults in Machi Windcatchers Using FRP and Steel Rebars: A Nonlinear Dynamic Study Based on ABAQUS Modeling
الموضوعات :
Mehdi Shahraki
1
,
shima aghakasiri
2
1 - Department of Civil Engineering, Zah.C., Islamic Azad University, Zahedan, Iran.
2 - Department of Civil Engineering, ST.C , Islamic Azad University, Tehran, Iran.
الکلمات المفتاحية: Seismic Performance, FRP, ABAQUS, Nonlinear Dynamic Study,
ملخص المقالة :
The traditional adobe windcatcher structures (Āsbaads) of Sistan, Iran, represent a unique form of vernacular architecture that is currently under consideration for UNESCO World Heritage inscription. Despite their historical and cultural significance, these arched vaults suffer from serious structural vulnerabilities due to material degradation and lack of reinforcement, especially under seismic loading. This research addresses the urgent need for preserving such heritage by assessing the seismic performance of adobe vaults in the Qaleh Machi windmills, with a focus on enhancing their resilience through modern retrofitting techniques. The study employs a series of nonlinear dynamic time-history analyses using calibrated finite element models developed in ABAQUS 2020. Both unreinforced and retrofitted configurations were modeled under three strong-motion earthquake records: Sarpol-e Zahab, Tabas, and Northridge. Two retrofitting systems—traditional steel rebars and Fiber Reinforced Polymer (FRP) bars—were implemented using the Near-Surface Mounted (NSM) technique. Mesh sensitivity analysis, material calibration based on laboratory tests, and realistic boundary conditions were incorporated to ensure high-fidelity simulation results. The findings reveal that FRP-retrofitted vaults consistently outperformed their unreinforced and steel-reinforced counterparts, achieving up to 54% reduction in peak displacement and 48% in plastic strain. Moreover, CFRP strengthening significantly improved energy dissipation, delayed stiffness degradation, and enhanced ductile behavior under cyclic loading. These results underscore the effectiveness of advanced composite retrofitting as a structurally robust and culturally appropriate solution for conserving adobe heritage in seismically active regions.
6. References
[1] Button, M. R., Cronin, C. J., & Mayes, R. L. (2002). Effect of vertical motions on seismic response of highway bridges. Journal of Structural Engineering, 128(12), 1551–1564. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1551)
[2] Hoo, C. P., Gergely, J., & L. D. (2007). In-situ verification of rehabilitation and repair of reinforced concrete bridge bents under simulated seismic loads. Earthquake Spectra, 17(3), 507–530.
[3] Garmeh, V., Nikghalb Rashti, A. A., Adibramezani, M., Hojat Kashani, A., & Adibi, M. (2022). SMA-based self-centering eccentrically braced frame with vertical link member. Structures, 43, 1230–1258. https://doi.org/10.1016/j.istruc.2022.07.034
[4] Arezoomand Langarudi, P., Adibramezani, M., Hojatkashani, A. et al. Effect of Design Optimality and Overstrength on the Seismic Performance of Steel Plate Shear Walls. Iran J Sci Technol Trans Civ Eng 49, 1401–1419 (2025). https://doi.org/10.1007/s40996-024-01513-7.
[5] Arezoomand, P., Khodadadi, R., & Shafiei, H. (2025). Comparison of Median Collapse Capacity of Steel Plate Shear Walls Using Approximate (Pushover-to-Fragility) and Exact Methods. Journal of Structural and Construction Engineering, 51(1), 33–47. 10.22065/jsce.2025.470572.3482
[6] Tutankhamun, P., Oshima, T., Balagoru, S., & Yamazaki, T. (2010). Ferro cement jacketing for retrofitting of reinforced concrete bridge piers for enhanced shear strength. In 2nd Int. Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures (SHM ISIS), Canada.
[7] Boury, A., Castori, G., & Corradi, M. (2011). Intrados strengthening of brick masonry arches with composite materials. Composites Part B: Engineering, 42(5), 1164–1172.
https://doi.org/10.1016/j.compositesb.2011.03.005
[8] Dimitri, R., & Tornabene, F. (2015). A parametric investigation of the seismic capacity for masonry arches and portals of different shapes. Engineering Failure Analysis, 52, 1–34. https://doi.org/10.1016/j.engfailanal.2015.02.021
[9] Carozzi, F., Poggi, C., Bertolesi, E., & Milani, G. (2018). Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: Experimental evaluation. Composite Structures, 187, 466–480.
https://doi.org/10.1016/j.compstruct.2017.12.075
[10] Button, H., Cronin, X., & Ye, J. (2020). Fire resistance performance of FRP rebar reinforced concrete columns. International Journal of Concrete Structures and Materials, 3(2), 111–117.
[11] Pouraminian, M. (2022). Multi-hazard reliability assessment of historical brick minarets. Journal of Building Pathology and Rehabilitation, 7(1), Article 10.
https://doi.org/10.1007/s41024-021-00148-9
[12] Cachim, P. B. (2009). Mechanical properties of brick aggregate concrete. Construction and Building Materials, 23(3), 1292–1297.
https://doi.org/10.1016/j.conbuildmat.2008.07.023
[13] Moslehi Tabar, A., & Najafi Dehkordi, H. (2018). Transverse vibration analysis of complicated truss arch bridges using continuum elements. Amirkabir Journal of Civil Engineering, 50(1), 53–60.
DOI: 10.22060/ceej.2017.10876.4943
[14] Seyedsjadi, S. M. (2019). Natural environment and ancient monuments of Sistan plain. Journal of Geographical Research, 56–57, 146–186.
[15] Akbarzadeh Morshedi, A., & Panahi, F. T. (2020). Experimental investigation of the behavior of brick masonry arches (vault and rib cover) unreinforced and reinforced with C-FRP under simultaneous vertical and horizontal loads. Advanced Research in Civil Engineering, 2(3), 41–50. 10.30469/arce.2020.117872
[16] Noroozi, F., Kalate, F., & Lotfollahi Yaghin, M. A. (2016). Numerical analysis of the dynamic behavior of a weighted concrete dam under the explosive load inside the tank. Journal of Civil and Environmental Engineering, 47(86).
[17] Wang, H., Zha, X., & Ye, J. (2009). Fire resistance performance of FRP rebar reinforced concrete columns. International Journal of Concrete Structures and Materials, 3(2), 111–117. DOI 10.4334/IJCSM.2009.3.2.111
