A Proposal for a Plasmonic 2×1 Multiplexer Composed of an Optical Adder, Integrated with a MEMS Micro-Switch

الموضوعات :

razieh soltanisarvestani ¹ , Rahim Ghayour ² , Maryam Mohitpour ³

1 - Department of Electrical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran
2 - Department of Electrical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran
3 - Department of Electrical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran

تاريخ الإرسال : 29 الأربعاء , رجب, 1446 تاريخ التأكيد : 26 الأربعاء , رمضان, 1446 تاريخ الإصدار : 09 الإثنين , شوال, 1446

الکلمات المفتاحية: Plasmonic, MIM, Optical Multiplexer, WDM, Optical Resonator,

ملخص المقالة :

 In this paper, a 2×1 Micro-Opto-Electro-Mechanical-Systems (MOEMS) multiplexer consisting of Metal-Insulator-Metal (MIM) waveguides and micro resonators is designed and numerically investigated. The proposed device takes the advantage of Surface Plasmon Polaritons (SPPs) propagation in the MIM structure and a mechanically tunable optical switch to realize the multiplexing function. According to the simulation results, the transmittances of the output channels of the device reach up to 72% at the desired wavelengths. Thereafter, the geometry of the proposed structure has been optimized to improve its functional characteristics. An extinction ration around 25.6 dB is obtained for the optimized two-channel structure in the operating wavelength range. Simple fabrication process, high efficiency, and low-cost manufacturing process make the proposed micro device a suitable choice for several applications in the area of optical telecommunications, especially wavelength division multiplexing. The proposed structure is composed of two main parts: a MEMS-based adder and a plasmonic switch.

المصادر:

[1] B. Beiranvand, A. S. Sobolev, and A. Sheikhaleh, "A proposal for a dual-band tunable plasmonic absorber using concentric-rings resonators and mono-layer graphene," Optik, vol. 223, p. 165587, 2020.

[2] M. A. Butt, "Metal‐insulator‐metal waveguide‐based plasmonic sensors: Fantasy or truth—A critical review," Applied Research, vol. 2, no. 4, p. e202200099, 2023.

[3] M. A. Butt, N. Kazanskiy, and S. Khonina, "Tapered waveguide mode converters for metal-insulator-metal waveguide plasmonic sensors," Measurement, vol. 211, p. 112601, 2023.

[4] N. Korani, A. Abbasi, and M. Danaie, "Band-pass and band-stop plasmonic filters based on Wilkinson power divider structure," Plasmonics, vol. 19, no. 2, pp. 733-742, 2024.

[5] M. Danaie, L. Hajshahvaladi, and E. Ghaderpanah, "A single-mode tunable plasmonic sensor based on an 8-shaped resonator for cancer cell detection," Scientific Reports, vol. 13, no. 1, p. 13976, 2023.

[6] M. Mohammadi, M. Soroosh, A. Farmani, and S. Ajabi, "High-performance plasmonic graphene-based multiplexer/demultiplexer," Diamond and Related Materials, vol. 139, p. 110365, 2023.

[7] S. Pooretemad, M. Pav, Z. Ghattan Kashani, and N. Granpayeh, "Ultra-compact all-optical plasmonic switch for three telecommunication windows using a nonlinear Kerr material and Fano resonance," Applied Optics, vol. 62, no. 15, pp. 4123-4133, 2023.

[8] S. H. Abdulwahid, A. G. Wadday, and S. M. Abdulsatar, "Multiple-input hybrid plasmonic OR logic gate with a nanostructure," Applied Optics, vol. 62, no. 3, pp. 566-572, 2023.

[9] A. Messner, D. Moor, D. Chelladurai, R. Svoboda, J. Smajic, and J. Leuthold, "Plasmonic, photonic, or hybrid? Reviewing waveguide geometries for electro-optic modulators," APL Photonics, vol. 8, no. 10, 2023.

[10] A. Elbanna et al., "2D material infrared photonics and plasmonics," ACS nano, vol. 17, no. 5, pp. 4134-4179, 2023.

[11] Y.-D. Wu, "High transmission efficiency wavelength division multiplexer based on metal–insulator–metal plasmonic waveguides," Journal of Lightwave Technology, vol. 32, no. 24, pp. 4844-4848, 2014.

[12] X. Mei, X. Huang, J. Tao, J. Zhu, Y. Zhu, and X. Jin, "A wavelength demultiplexing structure based on plasmonic MDM side-coupled cavities," JOSA B, vol. 27, no. 12, pp. 2707-2713, 2010.

[13] M. T. H. Azar, M. Zavvari, A. Arashmehr, Y. Zehforoosh, and P. Mohammadi, "Design of a high-performance metal–insulator–metal plasmonic demultiplexer," Journal of nanophotonics, vol. 11, no. 2, pp. 026002-026002, 2017.

[14] Q. Deng et al., "Adjustable plasmonic multi-channel demultiplexer with graphene sheets and ring resonators," Plasmonics, vol. 14, pp. 993-998, 2019.

[15] S. Asgari and N. Granpayeh, "Tunable plasmonic dual wavelength multi/demultiplexer based on graphene sheets and cylindrical resonator," Optics Communications, vol. 393, pp. 5-10, 2017.

[16] H. Zhuang, S. Sheng, F. Kong, K. Li, and Y. Wang, "A wavelength demultiplexing structure based on graphene nanoribbon resonators," Optics Communications, vol. 381, pp. 396-402, 2016.

[17] S. Asgari and T. Fabritius, "Tunable mid-infrared graphene plasmonic cross-shaped resonator for demultiplexing application," Applied Sciences, vol. 10, no. 3, p. 1193, 2020.

[18] R. Negahdari, E. Rafiee, and F. Emami, "Realization of all-optical plasmonic MIM split square ring resonator switch," Optical and quantum electronics, vol. 51, pp. 1-14, 2019.

[19] S. Khani, M. Danaie, and P. Rezaei, "Hybrid all-optical infrared metal-insulator-metal plasmonic switch incorporating photonic crystal bandgap structures," Photonics and Nanostructures-Fundamentals and Applications, vol. 40, p. 100802, 2020.

[20] X. Bana, X. Pang, X. Li, B. Hu, Y. Guo, and H. Zheng, "A nonlinear plasmonic waveguide based all-optical bidirectional switching," Optics Communications, vol. 406, pp. 124-127, 2018.

[21] T. Nurmohammadi, K. Abbasian, and R. Yadipour, "Ultra-fast all-optical plasmonic switching in near infra-red spectrum using a Kerr nonlinear ring resonator," Optics Communications, vol. 410, pp. 142-147, 2018.

[22] S. Khani, M. Danaie, and P. Rezaei, "All-optical plasmonic switches based on asymmetric directional couplers incorporating Bragg gratings," Plasmonics, vol. 15, pp. 869-879, 2020.

[23] Y. Karimi, H. Kaatuzian, A. Tooghi, and M. Danaie, "All-optical plasmonic switches based on Fano resonance in an X-shaped resonator coupled to parallel stubs for telecommunication applications," Optik, vol. 243, p. 167424, 2021.

[24] S. Bashiri and K. Fasihi, "A 2× 1 all-optical multiplexer using Kerr nonlinear nano-plasmonic switch," Optical and Quantum Electronics, vol. 51, no. 11, p. 374, 2019.

[25] M. Yin, Q. Deng, Y. Li, X. Wang, and H. Li, "Compact and broadband mode multiplexer and demultiplexer based on asymmetric plasmonic–dielectric coupling," Applied optics, vol. 53, no. 27, pp. 6175-6180, 2014.

[26] G. K. Fedder, Simulation of microelectromechanical systems. University of California, Berkeley, 1994.

[27] A. Sheikhaleh, K. Jafari, and K. Abedi, "Design and analysis of a novel MOEMS gyroscope using an electrostatic comb-drive actuator and an optical sensing system," IEEE Sensors Journal, vol. 19, no. 1, pp. 144-150, 2018.

[28] S. Yu, T. Zhao, J. Yu, and D. Pan, "Tuning multiple Fano resonances for on-chip sensors in a plasmonic system," Sensors, vol. 19, no. 7, p. 1559, 2019.

[29] F. Moradiani, M. Seifouri, K. Abedi, and F. G. Gharakhili, "High extinction ratio all-optical modulator using a vanadium-dioxide integrated hybrid plasmonic waveguide," Plasmonics, vol. 16, no. 1, pp. 189-198, 2021.

[30] A. Udupi and S. K. Madhava, "Plasmonic coupler and multiplexer/demultiplexer based on nano-groove-arrays," Plasmonics, vol. 16, no. 5, pp. 1685-1692, 2021.