Multiple Dependent States Repetitive Sampling Control Chart for Monitoring Rayleigh Distributed Data
الموضوعات :
Srinivasa Rao Gadde
1
,
Olatunde Adebayo Adeoti
2
1 - The University of Dodoma
Dodoma
2 - Department of Statistics, Federal University of Technology Akure, 340001, Nigeria
الکلمات المفتاحية: Attribute control chart, single sampling, multiple dependent state, average run length, chart coefficients,
ملخص المقالة :
An attribute control chart for Rayleigh distribution based on the multiple dependent state repetitive sampling (MDSRS) is developed in this paper. The performance of the proposed chart is evaluated in terms of average run length for the design of the proposed chart. Furthermore, the control chart constants for instance test time multiplier; inner and outer control limits coefficients are determined by considering the process in-control average run length (ARL) in support of different sample sizes. The efficiency of the proposed chart is compared with some competing control charts using other sampling methods such as single sampling (SS), multiple dependent states (MDS) and repetitive sampling (RS). The application of the proposed chart is illustrated using simulated data, which showed the superiority of the proposed chart as compared to the competing charts. Based on the ARL performance of the proposed chart and the application example, it is recommended that the process engineers use the proposed chart when monitoring the number of failed products that follow the Rayleigh distribution.
[1] Adeoti, O. A., and Ogundipe, P. (2021). A control chart for the generalized exponential distribution under time truncated life test. Life Cycle Reliability and Safety Engineering, 10(1), 53-59. doi: 10.1007/s41872-020-00146-9.
[2] Adeoti, O. A. and Rao, G.S. (2021). Moving average control charts for the Rayleigh and inverse Rayleigh distributions under time truncated life test. Quality Reliability Engineering International. DOI: 10.1002/qre.2933.
[3] Adeoti, O. A. and Rao, G.S. (2022). Attribute control chart for Rayleigh distribution using repetitive sampling under time truncated life test. Journal of Probability and Statistics. DOI: 10.11155/2022/8763091
[4] Ahmad, L., M. Aslam, and C.-H. Jun (2014). Designing of X-bar control charts based on process capability index using repetitive sampling. Transactions of the Institute of Measurement and Control 36 (3): 367-374.
[5] Aldosari, M. S., M. Aslam, and C.-H. Jun (2017). A new attribute control chart using multiple dependent state repetitive sampling. IEEE Access. 5: 6192-6197. doi:10.1109/ACCESS.2017. 2687523.
[6] Aldosari, M. S., Aslam, M., Srinivasa Rao, G., & Jun, C.-H. (2019). An attribute control chart for multivariate Poisson distribution using multiple dependent state repetitive sampling. Quality and Reliability Engineering International, 35(2), 627-643. doi: https://doi.org/10.1002/qre.2426.
[7] Al-Oraini, H. and Rahim, M.A. (2002). Economic statistical design of X̄ control charts for systems with Gamma ( λ, 2) in-control times. Computers and Industrial Engineering. 43: 645-654.
[8] Amin, R.W., Reynolds M.R. Jr. and Bakir S.T. (1995). Nonparametric quality control charts based on the sign statistic. Communications in Statistics-Theory and Methods, 24: 1579-1623
[9] Aslam, M, Balamurali, S, Jeyadurga P and Raza, M.A. (2020). Monitoring number of non-conforming items based on multiple dependent state repetitive sampling under truncated life tests. Communications in Statistics-Theory and Methods, DOI: 10.1080/03610926.2020.1847294.
[10] Aslam, M, Shafqat A, Rao, G.S, Malela-Majika, J-C., and Shongwe, S.C. (2020). Multiple Dependent state repetitive sampling based control chart for Birnbaum-Saunders distribution. Journal of Mathematics, Volume 2020: Article ID 8539361, 1-11. https://doi.org/10.1155/2020/8539361.
[11] Aslam, M., A. Nazir, and Jun, C.-H. (2015). A new attribute control chart using multiple dependent state sampling. Transactions of the Institute of Measurement and Control, 37 (4): 569-576. doi:10.1177/0142331214549094.
[12] Aslam, M., and Jun, C.-H. (2015). Attribute control charts for the Weibull distribution under truncated life tests. Quality Engineering, 27(3): 283-288. doi:10.1080/08982112.2015.1017649.
[13] Aslam, M., Khan, N. and Jun, C.-H. (2016). A control chart for time truncated life tests using Pareto distribution of second kind. Journal of Statistical Computation and Simulation 86 (11): 2113-2122. doi:10.1080/00949655.2015.1103737.
[14] Aslam, M., Khan, N., Azam, M. and Jun, C.-H. (2014). Designing of a new monitoring t-chart using repetitive sampling. Inf. Sci. 269: 210-216.
[15] Aslam, M., Arif, O.-H. and Jun, C.-H. (2017). A control chart for gamma distribution using multiple dependent state sampling. Industrial Engineering and Management Systems, 16 (1), 109-117.
[16] Balamurali, S., and Jeyadurga. P. (2019). Economic design of an attribute control chart for monitoring mean life based on multiple deferred state sampling. Applied Stochastic Models in Business and Industry 35 (3):893-907. doi:10.1002/asmb.2419.
[17] De Araújo Rodrigues, A. A., Epprecht, E. K., and De Magalhães, M. S. (2011). Double-sampling control charts for attributes. Journal of Applied Statistics, 38(1): 87-112. doi: 10.1080/02664760903266007.
[18 ] Farahani, A., Tohidi, H., Shoja, A. (2020). Optimization of Overall Equipment Effectiveness with Integrated Modeling of Maintenance and Quality. Engineering Letters, 28(2).
[19] Farahani, A., Tohidi, H., Shoja, A. (2019). An integrated optimization of quality control chart parameters and preventive maintenance using Markov chain. Advances in Production Engineering & Management. 14(1), pp 5–14. https://doi.org/10.14743/apem2019.1.307
[20] Jeyadurga, P., Balamurali, S. and Aslam. M. (2018). Design of an attribute np control chart for process monitoring based on repetitive group sampling under truncated life tests. Communications in Statistics-Theory and Methods, 47(24): 5934-5955. doi:10.1080/03610926.2017.1404098.
[21] Joekes, S., and Barbosa, E. P. (2013). An improved attribute control chart for monitoring non-conforming proportion in high quality processes. Control Engineering Practice, 21 (4): 407-412.
[22] Li, X., and Li. Y (2015). An analytical model for regular respiratory signals derived from the probability density function of Rayleigh distribution. In Proceedings of the 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, MiCoMilano Conference Center - Milan, Italy, August 25–29, 93–96.
[23] McCraken A.K. and Chakraborti, S. (2013). Control charts for joint monitoring of mean and variance: An overview. Quality Technology and Quantitative Management, 10(1): 17-36.
[24] Mutlu, M. (2014). Application of Rayleigh probability density function in electromagnetic wave propagation. Journal of Electrical and Electronic Engineering, 2 (1):17–21.
[25] Namdari, A., Tohidi, H., Keyser, T.K., & Drzymalski, J. (2017). Information sharing systems and teamwork between sub-teams: a mathematical modeling perspective. Journal of Industrial Engineering International. DOI 10.1007/s40092-017-0199-5
[26] Namdari, A., Drzymalski, J., Tohidi, H. (2017). Labor Productivity and Optimal Team Size in an Inspection Process. IIE Annual Conference. Proceedings, 854-859
[27] Wu, Z., and Wang, Q. (2007). An NP Control Chart Using Double Inspections. Journal of Applied Statistics, 34(7), 843-855. doi: 10.1080/02664760701523492.
