ارائۀ یک مدل ریاضی برای زمانبندی تولید و تعمیرات و نگهداری با در نظر گرفتن محدودیت دسترسی به منابع تولیدی در شرایط عدم قطعیت
الموضوعات :محمد شریف زادگان 1 , محمدرضا حیدری 2 , کورش پوری 3 , عادل پورقادر چوبر 4 , میلاد ابوالقاسمیان 5
1 - گروه مهندسی صنایع، واحد مسجد سلیمان، دانشگاه آزاد اسلامی، مسجد سلیمان، ایران (نویسندۀ مسئول)
2 - گروه مدیریت، دانشگاه فنی و حرفه ای، تهران، ایران
3 - دانشجوی دکتری مهندسی صنایع، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
4 - گروه مهندسی صنایع، واحد الکترونیکی، دانشگاه آزاد اسلامی، تهران، ایران
5 - گروه مهندسی صنایع، واحد لاهیجان، دانشگاه آزاد اسلامی، لاهیجان، ایران
الکلمات المفتاحية: نگهداری و تعمیرات, مدل ادغامی, زمانبندی تولید, الگوریتم فراابتکاری NSGA-II,
ملخص المقالة :
در سیستم های تولیدی و صنعتی، برنامه ریزی ادغامی تولید و عملیات و تعمیرات از اهمیت بسیار زیادی برخوردار است. از این رو در این پژوهش یک برنامه ریزی ادغامی چندهدفه با قابلیت بهینه سازی برای زمانبندی تولید و نگهداری و تعمیرات با ملحوظ دانستن محدودیت دسترسی به منابع تولیدی در شرایط عدم قطعیت ارائه شده است. برای این منظور، یک مدل ریاضی برنامه ریزی مختلط عدد صحیح در راستای برنامه ریزی تولید و نگهداری و تعمیرات در شرکت مارون مدل سازی گردید. بر طبق نتایج حاصل شده، ماکزیمم سود حاصل شده پس از کسر هزینهها برابر با 12690 میلیون دلار، کمترین ریسک ناشی از تولید محصول برابر با 3462 و کمترین مدت زمان اجرای نگهداری و تعمیرات برابر با 14172 ساعت محاسبه شده است. سرانجام، نتایج ارزیابی مدل سازی انجام شده نشان داد که استقرار نتایج حاصل از حل دقیق و فراابتکاری ارائه شده در این مقاله بیش از 7 درصد در تولیدات شرکت بهبود ایجاد میکند.
- Abolghasemian, M., Kanafi, A. G., & Daneshmand-Mehr, M. (2022). Simulation-based multiobjective optimization of open-pit mine haulage system: a modified-NBI method and meta modeling approach. Complexity, 2022.
- Abolghasemian, M., Pourghader Chobar, A., AliBakhshi, M., Fakhr, A., & Moradi Pirbalouti, S. (2021). Delay scheduling based on discrete-event simulation for construction projects. Iranian Journal of Operations Research, 12(1), 49-63.
- Achkar, V. G., Cafaro, V. G., Mendez, C. A., & Cafaro, D. C. (2019). Discrete-time MILP formulation for the optimal scheduling of maintenance tasks on oil and gas production assets. Industrial & Engineering Chemistry Research.
- Aguirre, A. M., & Papageorgiou, L. G. (2018). Medium-term optimization-based approach for the integration of production planning, scheduling and maintenance. Computers & Chemical Engineering, 116, 191-211.
- Ahmadi, R. (2018). An integrated approach to maintenance scheduling of multi-state production systems subject to deterioration. IMA Journal of Management Mathematics, 30(2), 235-264.
- Amiri, S., & Honarvar, M. (2018). Providing an integrated Model for Planning and Scheduling Energy Hubs and preventive maintenance. Energy, 163, 1093-1114.
- B. Bouslah, A. Gharbi, and R. Pellerin, "Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraint," Omega, vol. 61, pp. 110-126, 2016.
- Boudjelida, A. (2019). On the robustness of joint production and maintenance scheduling in presence of uncertainties. Journal of Intelligent Manufacturing, 30(4), 1515-1530.
- Chansombat, S., Pongcharoen, P., & Hicks, C. (2019). A mixed-integer linear programming model for integrated production and preventive maintenance scheduling in the capital goods industry. International Journal of Production Research, 57(1), 61-82.
- Cheng, G. Q., Zhou, B. H., & Li, L. (2018). Integrated production, quality control and condition-based maintenance for imperfect production systems. Reliability Engineering & System Safety, 175, 251-264.
- Chobar, A. P., Adibi, M. A., & Kazemi, A. (2022). Multi-objective hub-spoke network design of perishable tourism products using combination machine learning and meta-heuristic algorithms. Environment, Development and Sustainability, 1-28.
- Ertogral, K., & Öztürk, F. S. (2019). An integrated production scheduling and workforce capacity planning model for the maintenance and repair operations in airline industry. Computers & Industrial Engineering, 127, 832-840.
- F. Berthaut, A. Gharbi, and K. Dhouib, "Joint modified block replacement and production/inventory control policy for a failure-prone manufacturing cell," Omega, vol. 39, no. 6, pp. 642-654, 2011.
- Gilabert, E., Konde, E., Sierra, B., & Arnaiz, A. (2018). A multi-stage optimization algorithm for standardization of maintenance plans. IFAC-PapersOnLine, 51(11), 520-524.
- Glawar, R., Karner, M., Nemeth, T., Matyas, K., & Sihn, W. (2018). An approach for the integration of anticipative maintenance strategies within a production planning and control model. Procedia CIRP, 67, 46-51.
- Guiras, Z., Hajej, Z., Rezg, N., & Dolgui, A. (2018). Comparative Analysis of Heuristic Algorithms Used for Solving a Production and Maintenance Planning Problem (PMPP). Applied Sciences, 8(7), 1088.
- Hamrol, A. (2018). A new look at some aspects of maintenance and improvement of production processes. Management and Production Engineering Review, 9.
- Hamrol, A. (2018). A new look at some aspects of maintenance and improvement of production processes. Management and Production Engineering Review, 9.
- Haoues, M., Dahane, M., & Mouss, N. K. (2019). Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints. Journal of Intelligent Manufacturing, 30(2), 701-725.
- J. Kim and S. B. Gershwin, "Analysis of long flow lines with quality and operational failures," IIE transactions, vol. 40, no. 3, pp. 284-296, 2008.
- J. Liu, J. Shi, and S. J. Hu, "Quality-assured setup planning based on the stream-of-variation model for multi-stage machining processes," IIE transactions, vol. 41, no. 4, pp. 323-334, 2009.
- Jafari, L., & Makis, V. (2016). Optimal lot-sizing and maintenance policy for a partially observable production system. Computers & Industrial Engineering, 93, 88-98.
- Jahangiri, S., Abolghasemian, M., Ghasemi, P., & Chobar, A. P. (2023). Simulation-based optimisation: analysis of the emergency department resources under COVID-19 conditions. International journal of industrial and systems engineering, 43(1), 1-19.
- Kang, K., & Subramaniam, V. (2018). Joint control of dynamic maintenance and production in a failure-prone manufacturing system subjected to deterioration. Computers & Industrial Engineering, 119, 309-320.
- Kopanos, G. M., & Puigjaner, L. (2019). Integrated Operational and Maintenance Planning of Production and Utility Systems. In Solving Large-Scale Production Scheduling and Planning in the Process Industries (pp. 191-244). Springer, Cham.
- La Fata, C. M., & Passannanti, G. (2017). A simulated annealing-based approach for the joint optimization of production/inventory and preventive maintenance policies. The International Journal of Advanced Manufacturing Technology, 91(9-12), 3899-3909.
- Liu, Q., Dong, M., & Chen, F. F. (2018). Single-machine-based joint optimization of predictive maintenance planning and production scheduling. Robotics and Computer-Integrated Manufacturing, 51, 238-247.
- Liu, Q., Dong, M., Chen, F. F., Lv, W., & Ye, C. (2019). Single-machine-based joint optimization of predictive maintenance planning and production scheduling. Robotics and Computer-Integrated Manufacturing, 55, 173-182.
- Martinod, R. M., Bistorin, O., Castañeda, L. F., & Rezg, N. (2018). Maintenance policy optimisation for multi-component systems considering degradation of components and imperfect maintenance actions. Computers & Industrial Engineering, 124, 100-112.
- Matyas, K., Nemeth, T., Kovacs, K., & Glawar, R. (2017). A procedural approach for realizing prescriptive maintenance planning in manufacturing industries. CIRP Annals, 66(1), 461-464.
- Rastgar, I., Rezaeian, J., Mahdavi, I., & Fattahi, P. (2022). Integrated production planning and scheduling with maintenance constraints in hybrid flow shop environment. Modern Research in Decision Making, 7(2), 1-27.
- Rivera-Gómez, H., Gharbi, A., Kenné, J. P., Montaño-Arango, O., & Hernández-Gress, E. S. (2018). Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration. International Journal of Production Economics, 200, 103-118.
- S. S. Sana, "Preventive maintenance and optimal buffer inventory for products sold with warranty in an imperfect production system," International Journal of Production Research, vol. 50, no. 23, pp. 6763-6774, 2012.
- Schreiber, M., Klöber-Koch, J., Richter, C., & Reinhart, G. (2018). Integrated Production and Maintenance Planning for Cyber-physical Production Systems. Procedia CIRP, 72, 934-939.
- Sharifzadegan, M., & Pourghader Chobar, A. (2022). Mathematical modeling and problem solving Integrated production planning and preventive maintenance with limited human resources. Journal of New Researches in Mathematics, 8(39), 5-24.
- Sheikhalishahi, M., Eskandari, N., Mashayekhi, A., & Azadeh, A. (2019). Multi-objective open shop scheduling by considering human error and preventive maintenance. Applied Mathematical Modelling, 67, 573-587.
- Xiao, S., Chen, Z., & Sarker, B. R. (2019). Integrated maintenance and production decision for k-out-of-n system equipment with attenuation of product quality. International Journal of Quality & Reliability Management, 36(5), 735-751.
- Salahi, F., Daneshvar, A., Homayounfar, M., & Pourghader Chobar, A. (2023). Presenting an integrated model for production planning and preventive maintenance scheduling considering uncertainty of parameters and disruption of facilities. Journal of Industrial Management Perspective, 13(1, Spring 2023), 105-139.