List of Articles Fracture

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Effect of Thickness on Fracture Toughness of Al6061-Graphite
  S Doddamani M Kaleemulla
  10.22034/jsm.2019.666695
  20.1001.1.20083505.2019.11.3.12.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Fracture Parameters for Cracked Cylincal Shells
  M Kadri A Sahli S Sahli
  10.22034/jsm.2019.664221
  20.1001.1.20083505.2019.11.1.7.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
  20.1001.1.20083505.2019.11.4.10.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Fatigue Life Prediction of Rivet Joints
  M. M Amiri
  10.22034/jsm.2019.1867882.1436
  20.1001.1.20083505.2020.12.3.4.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - The Fracture Toughness of the Welding Zone in Gas Transfer Steel Pipes by Experimental and Numerical Methods
  M. R Torshizian M Boustani
  10.22034/jsm.2021.1896358.1570
  20.1001.1.20083505.2022.14.2.6.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Evaluation of Stress Intensity Factor in a Center Cracked Curved Plate Repaired with Stop Holes, Composite Patch, and Hybrid Methods
  Sirvan  Mohammadi S Daryaei
  https://doi.org/10.60664/jsm.2023.1051698
  20.1001.1.20083505.2023.15.1.2.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Influence of Notch Depth-to-Width Ratios on J-Integral and Critical Failure Load of Single-Edge Notched Tensile Aluminium 8011 Alloy Specimens
  C.S Sumesh P.J Arun Narayanan
  20.1001.1.20083505.2018.10.1.6.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
  A.R Shahani M.R Amini
  20.1001.1.20083505.2011.3.3.3.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
  S.S Bhadauria K.K Pathak M.S Hora
  20.1001.1.20083505.2010.2.3.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Analysis of the Fracture of a Turbine Blade
  A.R Shourangiz Haghighi S Rahmanian A Shamsabadi A zare I Zare
  20.1001.1.20083505.2016.8.2.6.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
  S.F Hosseini S Hadidi-Moud
  20.1001.1.20083505.2016.8.2.7.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Crack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
  R Kacker S.S Bhadauria
  20.1001.1.20083505.2016.8.2.12.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Crack Interaction Studies Using XFEM Technique
  K Sharma
  20.1001.1.20083505.2014.6.4.7.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Shape- Dependent Term Investigation of Khan- Liu Yield/ Fracture Criterion as a Function of Plastic Strain for Anisotropic Metals
  F Farhadzadeh M Tajdari M Salmani Tehrani
  20.1001.1.20083505.2018.10.3.7.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
  A.R Ghasemi M Moradi
  20.1001.1.20083505.2017.9.4.2.3