Free Vibration Analysis of Elastically Connected Beams with Step
Subject Areas :
Applied Mechanics
H Nayebi
1
(Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran)
Mohammad Mahdi Najafizadeh
2
(Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran)
Received: 2023-03-29
Accepted : 2023-05-24
Published : 2023-09-01
Keywords:
Parallel beams,
Winkler-type elastic layer,
Differential transform method,
Stepped beam,
Abstract :
In this study, free vibration of stepped beam which is parallel to a uniform beam with same length and elastically connected to it, is considered. Euler-Bernoulli beam theory has been applied to drive equations of motion, abrupt change in height of beam considered as step and Winkler-type elastic layer model serve as connection between beams. The differential transform method (DTM) is applied to determine dimensionless frequencies and mode shapes. In the case of two uniform parallel beams accuracy of solution is verified by comparing with results reported by other methods. It is assumed all supports have one type and fully clamped and fully hinged supports considered for boundary conditions. The effects of different parameters such as: step location and ratio, connecting layer coefficient and boundary conditions on dimensionless frequencies and mode shapes investigated and discussed. This problem handled for first time in present study and results are completely new.
References:
Oniszczuk Z., 2000, Free transverse vibrations of elastically connected simply supported double-beams complex system, Journal of Sound and Vibration 232: 387-403.
Oniszczuk Z., 2003, Forced transverse vibrations of an elastically connected complex simply supported double-beam system, Journal of Sound and Vibration 264: 273-286.
Mao Q., 2012, Free vibration analysis of elastically connected multiple-beams by using the Adomian modified decomposition method, Journal of Sound and Vibration 331: 2532-2542.
Huang M., Liu J. K., 2013, Substructural method for vibration analysis of the elastically connected double-beam system, Advances in Structural Engineering 16: 365-377.
Mirzabeigy A., Madoliat R., 2019, A Note on free vibration of a double-beam system with nonlinear elastic inner layer, Journal of Applied and Computational Mechanics 5: 174-180.
Zhao X., Chang P., 2021, Free and forced vibration of double beam with arbitrary end conditions connected with a viscoelastic layer and discrete points, International Journal of Mechanical Sciences 209: 106707.
Hao Q., Zhai W., Chen Z., 2018, Free vibration of connected double-beam system with general boundary conditions by a modified Fourier–Ritz method, Archive of Applied Mechanics 88: 741-754.
Chen C. K., Ho S. H., 1996, Application of differential transformation to eigenvalue problems, Applied Mathematics and Computation 79: 173-188.
Malik M., Huy Dang H., 1998, Vibration analysis of continuous systems by differential transformation, Applied Mathematics and Computation 96: 17-26.
Kaya M. O., Ozgumus O. O., 2006, Flexural–torsional-coupled vibration analysis of axially loaded closed-section composite Timoshenko beam by using DTM, Journal of Sound and Vibration 306: 495-506.
Shariyat M., Alipour M. M., 2011, Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations, Archive of Applied Mechanics 81:1289-1306.
Arikoglu A., Ozkol I., 2010, Vibration analysis of composite sandwich beams with viscoelastic core by using differential transform method, Composite Structures 92: 3031-3039.
Mao Q., 2012, Design of shaped piezoelectric modal sensors for cantilever beams with intermediate support by using differential transformation method, Applied Acoustics 73: 144-149.
Shahba A., Rajasekaran S., 2012, Free vibration and stability of tapered Euler–Bernoulli beams made of axially functionally graded materials, Applied Mathematical Modelling 36: 3094-3111.
Catal S., 2012, Response of forced Euler-Bernoulli beams using differential transform method, Structural Engineering & Mechanics 42: 95-119.
Suddoung K., Charoensuk J., Wattanasakulpong N., 2013, Application of the differential transformation method to vibration analysis of stepped beams with elastically constrained ends, Journal of Vibration and Control 19: 2387-2400.
Mirzabeigy A., 2014, Semi-analytical approach for free vibration analysis of variable cross-section beams resting on elastic foundation and under axial force, International Journal of Engineering, Transactions C: Aspects 27: 455-463.
Wattanasakulpong N., Ungbhakorn V., 2014, Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities, Aerospace Science and Technology 32: 111-120.
Rajasekaran S., 2013, Buckling and vibration of axially functionally graded nonuniform beams using differential transformation based dynamic stiffness approach, Meccanica 48: 1053-1070.
Yeh Y. L., Wang Ch., Jang M-J., 2007, Using finite difference and differential transformation method to analyze of large deflections of orthotropic rectangular plate problem, Applied Mathematics and Computation 190: 1146-1156.
Ozgumus O. O., Kaya M. O., 2010, Vibration analysis of a rotating tapered Timoshenko beam using DTM, Meccanica 45: 33-42.
Rajasekaran S., 2013, Buckling and vibration of stepped rectangular plates by element-based differential transform method, The IES Journal Part A: Civil & Structural Engineering 6: 51-64.
Rashidi M. M., Hayat T., Keimanesh T., Yousefian H., 2013, A study on heat transfer in a second-grade fluid through a porous medium with the modified differential transform method, Heat Transfer-Asian Research 42: 31-45.
Nourazar S., Mirzabeigy A., 2013, Approximate solution for nonlinear Duffing oscillator with damping effect using the modified differential transform method, Scientia Iranica 20: 364-368.
Merdan M., Yildirim A., Gokdogan A., 2012, Numerical solution of time-fraction modified equal width wave equation, Engineering Computations 29: 766-777.
Fernandes da Silva J., Allende Dias do Nascimento L., Simone dos Santos H., 2016, Free vibration analysis of Euler-Bernoulli beams under non-classical boundary conditions, Conem 2016, Fortaleza Ceara, Italy.
DU J., XU D., Zhang Y., Yang T., Liu Z., 2016, Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method, Inter Noise 2014, Melbourne, Australia.
