Fluoride at high concentrations in water is detrimental to human health. To find an efficient means of removal of fluoride from aqueous system, we synthesized magnesium oxide (MgO)- based iron-cobalt-manganese (MgO-FCN ) nanocomposites via co-precipitation. Fluoride ads
More
Fluoride at high concentrations in water is detrimental to human health. To find an efficient means of removal of fluoride from aqueous system, we synthesized magnesium oxide (MgO)- based iron-cobalt-manganese (MgO-FCN ) nanocomposites via co-precipitation. Fluoride adsorption process was optimized by standard software. The effect of independent parameters such as pH (3-11), initial dose of nanoparticle (0.02-0.1 g/L), initial concentration of fluoride (10-50 mg/L) and reaction time (30-180 min) were optimized to obtain the best responses of fluoride removal using statistical Central Composite Design (CCD) in the procedure of response surface modeling. The best conditions were optimized as pH=5, initial concentration of nanoparticle =0.05 g/L, initial concentration of fluoride =50 mg/L and the process time of 90 min. Under these conditions, the removal efficiency of the fluoride by MgO-based nanocomposites was achieved as 84.64%. High correlation coefficients for the proposed model was also obtained (adjusted R2=0.9993 and R2=0.9984). The equilibrium data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The Langmuir model was found to be describing the data best. Kinetic studies showed that the adsorption followed a pseudo-second order reaction.
Manuscript profile
