Construction nanoparticles imported into the environment in recent years in Iran

Subject Areas : Journal of Nanoanalysis

Zahra  Sadid ¹ (Department of Project and Construction Management, Maybod Branch, Islamic Azad University, Maybod, Iran)
Mahsa  Fakharpour ² (Department of Physics, Maybod Branch, Islamic Azad University, Maybod, Iran)

Received: 2021-12-10 Accepted : 2022-02-22 Published : 2022-09-30

Keywords: nanoparticles, environment, Construction materials, Productions, Importations,

Abstract :

In this paper, the quantities of nanomaterials used in the construction industry in Iran in recent years have been estimated. Then the amounts of nanomaterials in different environments of water, air, soil, and municipal wastewater from 2015 to 2019 in Iran have been estimated. The results show that during these few years, the amount of imports of nanoparticles has been more than its production. This study shows that the highest concentrations of nanoparticles in different environments are SiO2, TiO2, Fe2O3, and carbon nanotube, respectively. While the concentration of TiO2 nanoparticles, carbon nanotubes, and Fe2O3 in different environments has increased with a gentle slope during five years. This could be due to the increasing use of these nanoparticles in the industry without control and the lack of appropriate filters to prevent nanoparticles from entering the environment. The results of this study show that during five years, the concentrations of SiO2, TiO2, carbon nanotube, Fe2O3 nanoparticles has increased by about 4%, 30%, 28%, and 45% in water and %11, 16%, 27% and 29% in air, respectively. Also, their concentrations in soil %23, 18%, 43% and 52% and in municipal wastewater %30, 27%, 37% and 61%, respectively.

References:

1. National Nanotechnology Initiative. What It Is and How It Works | Nano. Nano.gov. Published 2019. https://www.nano.gov/nanotech-101/what.


2. US Environmental Protection Agency nanotechnology white paper.


3. Fakharpour M, Babaei F, Savaloni H. Engineering Mn as Tetragonal-Like Helical Sculptured Thin Film for Broadband Absorption. Plasmonics. 2016;11(6):1579-1587. doi: https://doi.org/10.1007/s11468-016-0213-6


4. Fakharpour M. The effect of slope and number of arms on the structural properties of square tower-like manganese thin films. Journal of Nanoanalysis. 2021;8(1):7-16. doi:https://doi.org/10.22034/jna.2021.681544


5. Fakharpour M, Gholizadeh Arashti M, Musazade Meybodi MT. Electrical Characterization of zig-zag Aluminum Thin Films Using Experimental and Theoretical Methods. Journal of Optoelectronical Nanostructures. 2021;6(3):25-42. doi:https://doi.org/10.30495/JOPN.2021.27468.1218


6. Fakharpour M, Savaloni H. Fabrication of graded helical square tower-like Mn sculptured thin films and investigation of their electrical properties: comparison with perturbation theory. Iranian physical journal. 2017;11(2):109-117. doi: https://doi.org/10.1007/s40094-017-0242-3


7. Gholizadeh Arashti M, Fakharpour M. Fabrication and characterization of Al/glass zig-zag thin film, comparing to the discrete dipole approximation results. The European Physical Journal B. 2020;93(5):78. doi:https://doi.org/10.1140/epjb/e2020-100581-0


8. Fakharpour Mahsa, Taheri Ghazal. Fabrication of Al zigzag thin films and evaluation of mechanical and hydrophobic properties. Applied Physics A. 2020;126(8):621. doi: https://doi.org/10.1007/s00339-020-03773-2


9. Fakharpour M, Hadi M. Temperature and substrate effect on the electrical and structural properties of NiO columnar nanostructure. Applied Physics A. 2023;129(3):234. doi:https://doi.org/10.1007/s00339-023-06454-y


10. Biscarini F, Taliani C, Chen J, Komanduri R. Nanomanufacturing and Processing-Research, Education, Infrastructure, Security, Resource. Journal of Manufacturing Science and Engineering-transactions of The Asme. 2002;124(2):489-490. doi:https://doi.org/10.1115/1.1471359


11. Sobolev K, Shah SP. Nanotechnology in Construction. Springer; 2015.
    https://doi.org/10.1007/978-3-319-17088-6


12. Yang G, Park SJ. Conventional and Microwave Hydrothermal Synthesis and Application of Functional Materials: A Review. Materials. 2019;12(7):1177. doi:https://doi.org/10.3390/ma12071177


13. Lee J, Mahendra S, Alvarez PJ. Nanomaterials in the Construction Industry: A Review of Their Applications and Environmental Health and Safety Considerations. ACS nano. 2010;4(7):3580-3590. doi:https://doi.org/10.1021/nn100866w


14. Calle D la, Menta M, Séby F. Current trends and challenges in sample preparation for metallic nanoparticles analysis in daily products and environmental samples: A review. Spectrochimica Acta Part B: Atomic Spectroscopy. 2016;125:66-96. doi:https://doi.org/10.1016/j.sab.2016.09.007


15. Lee J, Mahendra S, Alvarez PJJ. Potential Environmental and Human Health Impacts of Nanomaterials Used in the Construction Industry. Nanotechnology in Construction 3. Published online 2009:1-14. doi: https://doi.org/10.1007/978-3-642-00980-8_1


16. Ge Z, Gao Z. Applications of nanotechnology and nanomaterials in construction. In: First Inter. Confer. Construc. Develop. Countries. ; 2008:235-240.


17. Sobolev K, Gutiérrez MF. How nanotechnology can change the concrete world. American Ceramic Society Bulletin. 2005;84(10):14.


18. Sáez de Ibarra Y, Gaitero JJ, Erkizia E, Campillo I. Atomic force microscopy and nanoindentation of cement pastes with nanotube dispersions. Physica Status Solidi A-applications and Materials Science. 2006;203(6):1076-1081. doi: https://doi.org/10.1002/pssa.200566166


19. Luo T, Liang T xiang, Li C sheng. Addition of carbon nanotubes during the preparation of zirconia nanoparticles: influence on structure and phase composition. Powder Technology. 2004;139(2):118-122. doi:https://doi.org/10.1016/j.powtec.2003.12.001


20. Fakharpour M, Karimi R. Electromagnetic wave absorption properties of MWCNTs-COOH/cement composites with different shapes of chiral, armchair and zigzag. Fullerenes, Nanotubes and Carbon Nanostructures. 2020;29(5):386-393. doi: https://doi.org/10.1080/1536383X.2020.1849148


21. Fakharpour M, Gholizadeh Arashti M. Effect of three MWCNTs-COOH (chiral, zigzag and armchair) on the mechanical properties and water absorption of cement-based composites. Fullerenes, Nanotubes, and Carbon Nanostructures. 2023;31(5):404-411. doi: https://doi.org/10.1080/1536383X.2023.2169274


22. Mohajeri Nav F, Fakharpour M, Gholizadeh Arashti M. Structural Performance of CNT-Reinforced Cementitious Materials Considering the Effect of Chirality of Nanotubes. Journal of Testing and Evaluation. 2021;50(1):20200474-20200474. doi: https://doi.org/10.1520/JTE20200474


23. Li G. Properties of high-volume fly ash concrete incorporating nano-SiO2. Cement and Concrete Research. 2004;34(6):1043-1049. doi: https://doi.org/10.1016/j.cemconres.2003.11.013


24. Rana AK, Rana SB, Kumari A, Kiran V. Significance of nanotechnology in construction engineering. International Journal of Recent Trends in Engineering. 2009;1(4):46.


25. Zhu W, Bartos PJM, Porro A. Application of nanotechnology in construction. Materials and Structures. 2004;37(9):649-658. doi:https://doi.org/10.1007/BF02483294


26. Irie H, Sunada K, Hashimoto K. Recent Developments in TiO2 Photocatalysis: Novel Applications to Interior Ecology Materials and Energy Saving Systems. Electrochemistry. 2004;72(12):807-812. doi: https://doi.org/10.5796/electrochemistry.72.807


27. Golshan V, Mirjalili F, Fakharpour M. Self-Cleaning Surfaces with Superhydrophobicity of Ag-TiO2 Nanofilms on the Floor Ceramic Tiles. Glass Physics and Chemistry. 2022;48(1):35-42. doi: https://doi.org/10.1134/S1087659622010059


28. Kang S, Mauter MS, Elimelech M. Microbial Cytotoxicity of Carbon-Based Nanomaterials: Implications for River Water and Wastewater Effluent. Environmental Science & Technology. 2009;43(7):2648-2653. doi:https://doi.org/10.1021/es8031506


29. Kang S, Pinault M, Pfefferle LD, Elimelech M. Single-Walled Carbon Nanotubes Exhibit Strong Antimicrobial Activity. Langmuir. 2007;23(17):8670-8673. doi: https://doi.org/10.1021/la701067r


30. Kang S, Herzberg M, Rodrigues DF, Elimelech M. Antibacterial Effects of Carbon Nanotubes: Size Does Matter! Langmuir. 2008;24(13):6409-6413. doi:https://doi.org/10.1021/la800951v


31. Kang S, Mauter MS, Elimelech M. Physicochemical Determinants of Multiwalled Carbon Nanotube Bacterial Cytotoxicity. Environmental Science & Technology. 2008;42(19):7528-7534. doi:https://doi.org/10.1021/es8010173


32. Sayes CM, Wahi R, Kurian PA, et al. Correlating Nanoscale Titania Structure with Toxicity: A Cytotoxicity and Inflammatory Response Study with Human Dermal Fibroblasts and Human Lung Epithelial Cells. Toxicological Sciences. 2006;92(1):174-185. doi:https://doi.org/10.1093/toxsci/kfj197


33. Zhu X, Zhu L, Duan Z, Qi R, Li Y, Lang Y. Comparative toxicity of several metal oxide nanoparticle aqueous suspensions to Zebrafish (Danio rerio) early developmental stage. Journal of Environmental Science and Health, Part A. 2008;43(3):278-284. doi:https://doi.org/10.1080/10934520701792779


34. Cancer (IARC) IA for R on. Silica, some silicates, Coal dust, and para-Aramid Fibrils. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. 1997;68. Accessed January 14, 2024. https://cir.nii.ac.jp/crid/1574231874305535744


35. Attik G, Brown RC, Jackson P, Creutzenberg O, Aboukhamis I, Rihn B. Internalization, Cytotoxicity, Apoptosis, and Tumor Necrosis Factor-α Expression in Rat Alveolar Macrophages Exposed to Various Dusts Occurring in the Ceramics Industry. Inhalation Toxicology. 2008;20(12):1101-1112. doi: https://doi.org/10.1080/08958370802136731


36. Sun TY, Bornhöft NA, Hungerbühler K, Nowack B. Dynamic Probabilistic Modeling of Environmental Emissions of Engineered Nanomaterials. Environmental Science & Technology. 2016;50(9):4701-4711. doi:https://doi.org/10.1021/acs.est.5b05828


37. Sun TY, Gottschalk F, Hungerbühler K, Nowack B. Comprehensive probabilistic modelling of environmental emissions of engineered nanomaterials. Environmental Pollution. 2014;185:69-76. doi:https://doi.org/10.1016/j.envpol.2013.10.004