بهینه سازی شرایط سرخ کردن فیلههای مرغ با استفاده از هوای داغ به روش سطح پاسخ
محورهای موضوعی : اصول طراحی و مهندسی صنایع غذاییفاطمه کشاورزیان 1 , حبیب اله میرزایی 2 , محمود سلطانی فیروز 3 , علیرضا صادقی ماهونک 4 , مجید خانعلی 5 , حسینعلی تاش شمس آبادی 6
1 - دانشجوی دکتری دانشکده علوم و صنایع غذایی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران.
2 - دانشیار دانشکده علوم و صنایع غذایی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران.
3 - استادیار گروه مهندسی ماشینهای کشاورزی، دانشکده کشاورزی، دانشگاه تهران، کرج، ایران.
4 - استاد دانشکده علوم و صنایع غذایی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران.
5 - دانشیار گروه مهندسی ماشینهای کشاورزی، دانشکده کشاورزی، دانشگاه تهران، کرج، ایران.
6 - دانشیار دانشکده مهندسی مکانیک بیوسیستم، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان، ایران.
کلید واژه: بهینهسازی فرآیند, روش سطح پاسخ, سرخ کردن با هوای داغ, فیله مرغ,
چکیده مقاله :
مقدمه: گوشت مرغ یکی از منابع مهم و سالم غنی از پروتئین در رژیم غذایی است بنابراین نحوه تهیه و طبخ آن به دلیل مصرف بالای آن مورد توجه قرار میگیرد. فرآیند سرخ کردن از رایج ترین عملیات واحد در صنایع غذایی است، بدین منظور تلاش هایی برای دستیابی به محصولات با محتوی کم روغن انجام شده است. سرخ کردن با هوای داغ یک روش جدید سرخ کردن است که در این روش محصولات از طریق تماس مستقیم با هوای داغ و قطرات روغن در محفظه سرخ کن مورد فرآوری قرار می گیرند. مواد و روشها: در این پژوهش، از دستگاه سرخ کن با هوای داغ جهـت فـرآوری فیلههای مرغ اسـتفاده گردیـد. روش سطح پاسخ برای مـدلسـازی و به دسـت آوردن شـرایط بهینـه فرآینـد سرخ کردن با هوای داغ استفاده شد. تـاثیر پارامترهای فرآیندی (دما 160-180-200 درجه سلسیوس،زمان10 ، 20 و 30 دقیقه و سرعت جریان هوا 1.5، 2.5 و 3.5 متر بر ثانیه) بــر ویژگیهای محصول نهایی(میزان رطوبت، میزان محتوی چربی، رنگ، تردی و ارزیابی حسی) به منظور دستیابی به شرایط بهینـه فرآینـد مـورد ارزیـابی قرار گرفت.یافتهها: نتایج به دست آمده نشان دادند که محتوی رطوبت، تـردی بافـت محـصول و تغییرات رنگ محصول متـاثر از دما و مدت زمان فرآیند سرخ کردن با هوای داغ بودند و با افزایش مقدار این پارامترها افزایش یافتند. متغیرهای سرعت جریان هوا، دما و زمان فرآیند سرخ کردن با هوای داغ بر روی محتوی چربی در فیلههای مرغ سرخ شده اثر معنیدار و روند افزایشی داشتند (0.05 ≤ p).نتیجهگیری: بر اساس نتایج حاصل از آزمایشها، شرایط بهینه سـرخ کـردن با هوای داغ دمای200 درجه سلسیوس، سرعت دمنده هوا 1.5 متر برثانیه و زمـان 22.88 دقیقـه تعیـین گردید.
Introduction: Chicken meat is one of the important and healthy sources of protein in the diet. Therefore, due to its high consumption, its preparation and cooking methods should be taken into consideration. Frying process is one of the most common operations in the food industry. In this method efforts have been made to obtain products with low oil content. Hot air frying is a new method of frying in which products are processed through direct contact with hot air and oil droplets in the frying chamber.Materials and Methods: In this research, a hot air fryer was used to process chicken fillets. The response surface method was employed to model and obtain the optimal conditions of the hot air frying process. The effect of process parameters (temperature of 160,180,200 degrees Celsius, time of 10, 20 and 30 minutes and air flow speed of 1.5, 2.5 and 3.5 m/s) on the characteristics of the final product (Moisture content, fat content, evaluation of color parameters, crispness and sensory evaluation) were evaluated in order to achieve the optimal conditions of the process.Results: The results showed that the moisture content, crisp texture of the product and changes in the color of the product are affected by the temperature and duration of the process and increase with the increase of the parameters. The variables of air flow speed, temperature and process time have a significant effect on the fat content in fried chicken fillets (P≤0.05) and show an increasing trend.Conclusion: Based on the results of the tests, the optimal conditions for frying with hot air temperature of 200 degrees Celsius, air blower speed of 1.50 meters per second and time of 22.87 minutes were determined.
AACC. (1986). Approved methods of the American Association of cereal chemists, Minneapolis MN: AACC.
Abd Rahman, N.A., Abdul Razak, S.Z., Lokmanalhakim, S.L., Taip, F.S. & Mustapa Kamal, S. M. )2016(. Response surface optimization for hot air‐ frying technique and its effects on the quality of sweet potato snack. Journal of Food Process Engineering, 40(4), 1-8. https//doi.org/10.1111/jfpe.12507
AOAC. (1997). Official Method and Recommended Practices of the AOCS, 15th edition, The American Oil chemist 's Society Champagn, IL
Alvis, A., Vélez, C., Rada-Mendoza, M., Villamiel, M. & Villada, H. S. (2009). Heat transfer coefficient during deep-fat frying. Food Control, 20 (4), 321-325. https://doi.org/10.1016/j.foodcont.2008.05.016
Andrés, A., Arguelles, Á., Castelló, M. L. & Heredia, A. (2012). Mass transfer and volume changes in french fries during air frying. Food and Bioprocess Technology, 6(8), 1917-1924. https//doi.org/10.1007/s11947-012-0861-2
Andres, A., Heredia, A., Castello, M.L. & Arguelles, A. (2014). Evolution of mechanical and optical properties of French fries obtained by hot air-frying. LWT- Food science and Technology, 57, 755-760. https://doi.org/10.1016/j.lwt.2014.02.038
Akdeniz, N., Sahin S. & Sumnu G. (2006). Functionality of batters containing different gums for deep-fat frying of carrot slices. Journal of Food Engineering. 75, 522–526. https://doi.org/10.1016/j.jfoodeng.2005.04.035
Andreadis, I. (2000). A color coordinate normalizer chip. Journal of Intelligent and Robotic Systems, 28, 181-196. https://doi.org/10.1023/A:1008157318480
Bravo, J., Sanjuan, N., Ruales, J. & Mulet, A. (2009). Modeling the dehydration of apple slices by deep fat frying. Drying Technology, 27, 782-786. https://doi.org/10.1080/07373930902828187.
Braeckman, L., Ronsse, F., Hidalgo, P. C. & Pieters, J. (2009). Influence of combined IR-grilling and hot air cooking conditions on moisture and fat content, texture and colour attributes of meat patties. Journal of Food Engineering, 93(4), 437-443. http://dx.doi.org/10.1016/j.jfoodeng.2009.02.009
Ding, Y., Zhou, T., Liao, Y., Lin, H., Deng, S. & Zhang, B. (2022). Comparative Studies on the Physicochemical and Volatile Flavour Properties of Traditional Deep Fried and Circulating-Air Fried Hairtail (Trichiurus lepturus). Foods, 2022, 11, 2710. https://doi.org/10.3390/ foods11172710.
Dueik, V. (2010). Vacuum frying reduces oil uptake and improves the quality parameters of carrot crisps. Food Chemistry, 119(3), 1143-1149. https://doi.org/10.1016/j.foodchem.2009.08.027
Fang, M. (2021). Mass transfer and texture characteristics of fish skin during deep-fat frying, electrostatic frying, air frying and vacuum frying. LWT, 137, 110494. https://doi.org/10.1016/j.lwt.2020.110494 .
Farinu, A. & Baik, O.D. (2005). Deep fat frying of foods-Transport Phenomena. Food Reviews International, 21(4), 389-410. https://doi.org/10.1080/87559120500222896
Fikry, M. (2021). Optimization of the Frying Temperature and Time for Preparation of Healthy Falafel Using Air Frying Technology. Foods, 10(11).
Garayo, J. & Moreira, R. (2002). Vacuum frying of potato chips. Food Engineering, 55,181-191. https://doi.org/10.1016/S0260-8774%2802%2900062-6.
Gouyo, T. (2021). Microstructure analysis of crust during deep-fat or hot-air frying to understand French fry texture. Journal of food Engineering, 298, 110484. https://doi.org/10.1016/j.jfoodeng.2021.11048
Heredia, A., Castello, M., Argüelles, A. & Andres, A. (2014). Evolution of mechanical and optical properties of French fries obtained by hot air-frying. LWT-Food Science and Technology, 57(2), 755-760. https://doi.org/10.1016/j.lwt.2014.02.038
Innawong, B., Mallikarjunan, P., Marcy, J. & Cundiff, J. (2006). Pressure conditions and quality of chicken nuggets fried under gaseous nitrogen atmosphere. Journal of food processing and preservation, 30(2), 231-245. https://doi.org/10.1111/j.1745-4549.2006.00061.x
Jin, W., Pei, J., Chen, X., Geng, J., Chen , D. & Gao, R. (2021). Influence of Frying Methods on Quality Characteristics and Volatile Flavor Compounds of Giant Salamander (Andrias davidianus) Meatballs. Journal of Food Quality. https://doi.org/10.1155/2021/8450072
Kim, D. N., Lim, J., Bae, I. Y., Lee, H. G. & Lee, S. (2011). Effect of hydrocolloid coatings on the heat transfer and oil uptake during frying of potato strips. Journal of Food Engineering, 102(4), 317-320. https://doi.org/10.1016/j.jfoodeng.2010.09.005
Kowalska, J., Miarka, D., Marzec, A., Ciurzyńska, A., Janowicz, M., Galus, S. & Kowalska, H. (2023). Sous-Vide as an Innovative and Alternative Method of Culinary Treatment of Chicken Breast in Terms of Product Quality and Safety. Applied Sciences, 13(6), 3906. https://doi.org/10.3390/app13063906
Krokida, M.K., Oreopoulou, V. & Maroulis, Z.B. (2001). Colour changes during deep fat frying. Journal of food Engineering, 48(3), 219-225. https://doi.org/10.1016/S0260-8774(00)00161-8
Kalogianni, E. P. & P. G. Smith (2013). Effect of frying variables on F rench fry properties. International Journal of Food Science & Technology, 48(4), 758-770.
Kassama, L. & M. Ngadi (2005). Pore structure characterization of deep-fat-fried chicken meat. Journal of Food Engineering, 66(3), 369-375. https://doi.org/10.1016/j.jfoodeng.2004.04.00
Kurp, L., Danowska-Oziewicz, M. & Kłębukowska, L. (2022). Sous vide cooking effects on physicochemical, microbiological and sensory characteristics of pork loin. Applied Sciences, 12(5), 2365. http://dx.doi.org/10.3390/app12052365
Liu, L., Huang, P., Xie, W., Wang, J., Li, Y., Wang, H. & Zhao, Y. (2022). Effect of air fryer frying temperature on the quality attributes of sturgeon steak and comparison of its performance with traditional deep fat rying. Food Science & Nutrition, 10(2), 342-353. https://doi.org/10.1002/fsn3.2472
Majzoubi, M., Imani, B. & Farhanaki, A. (2014). Removing oil used for frying snacks using hot air. The first national snack conference. Food Science and Technology Research Institute, Mashhad[ In persian].
Michalak-Majewska, M., Stanikowski, P., Gustaw, W., Sławińska, A., Radzki, W., Skrzypczak, K. & Jabłońska-Ryś, E. (2018). Sous-vide cooking technology—Innovative heat treatment method of food. ŻYWNOŚĆ. Nauka. Technologia. Jakość, 25, 34-44. https://doi.org/10.15193/ZNTJ/2018/116/244
Ngadi, M., Li, Y. & Oluka, S. (2007). Quality changes in chicken nuggets fried in oils with different degrees of hydrogenatation. LWT-Food Science and Technology, 40(10), 1784-1791. https://doi.org/10.1016/j.lwt.2007.01.004
Pang, B., Yu, X., Bowker, B., Zhang, J., Yang, Y. & Zhuang, H. (2021). Effect of meat temperature on moisture loss, water properties, and protein profiles of broiler pectoralis major with the woody breast condition. Poultry Science, 100(2), 1283-1290. https://doi.org/10.1016/j.psj.2020.10.034
Pedreschi, F. (2005). Color changes and acrylamide formation in fried potato slices. Food Research International, 38(1(, 1-9. 10.1016/j.foodres.2004.07.002
Pedreschi, F. (2012). Frying of potatoes: Physical, chemical, and microstructural changes. Drying Technology, 30(7), 707-725. http://dx.doi.org/10.1080/07373937.2012.663845
Rabeler, F., Skytte, J. L. & Feyissa, A. H. (2019). Prediction of thermal induced color changes of chicken breast meat during convective roasting: A combined mechanistic and kinetic modelling approach. Food Control, 104, 42-49. https://doi.org/10.1016/j.foodcont.2019.04.018
Rabeler, F. & Feyissa, A. H. (2018). Modelling the transport phenomena and texture changes of chicken breast meat during the roasting in a convective oven. Journal of Food Engineering, 237, 60-68. https://doi.org/10.1016/j.jfoodeng.2018.05.021
Rady, A. (2019). Pretreatment and freezing rate effect on physical, microstructural, and nutritional properties of fried sweet potato. Transactions of the ASABE, 62(1), 45-59. https://doi.org/10.13031/trans.13099
Sahin, S., Sumnu, G. & Altunakar, B. (2005). Effects of batters containing different gum types on the quality of deep‐fat fried chicken nuggets. Journal of the Science of Food and Agriculture, 85(14), 2375-2379. https://doi.org/10.1002/jsfa.2258
Salvador, A., Hough G. & Fiszman S.M. (2005). Acceptability of batter-coated squid rings prepared without industrial pre-frying. European Food Research and Technology, 221, 36–40. https://doi.org/10.1007/s00217-005-1150-3
Santos, C. S.P., Cunha, S.C. & Susana Casal, S. (2017). Deep or air frying? A comparative study with different vegetable oils. European Journal of lipid science and Technology, 119(6), 1600375. https://doi.org/10.1002/ejlt.201600375.
Sansano, M., Juan-Borrás, M., Escriche, I., Andrés, A. & Heredia, A. (2015). Effect of pretreatments and air‐frying, a novel technology, on acrylamide generation in fried potatoes. Journal of Food Science, 80(5), T1120-T1128. https://doi.org/10.1111/1750-3841.12843
Serdaroglu, M., Abdraimov, K. & Oenenc, A. (2007). The effects of marinating with citric acid solutions and grapefruit juice on cooking and eating quality of turkey breast. Journal of Muscle foods, 18(2), 162-172. https://doi.org/10.1111/j.1745-4573.2007.00074.x
Shaker, M. A. (2015). Comparison between traditional deep-fat frying and air-frying for production of healthy fried potato strips. International Food Research Journal, 22(4), 1557-1563 http://www.ifrj.upm.edu.my.
Shyu, S.L. & Hwang, L. S. (2001). Effects of processing conditions on the quality of vacuum fried apple chips. Food Research International, 34(2-3), 133-142. https://doi.org/10.1016/S0963-9969(00)00141-1
Shyu, S. L., Hau, L.B. & Hwang, L.S. (2005). Effects of processing conditions on the quality of vacuum‐fried carrot chips. Journal of the Science of Food and Agriculture, 85(11), 1903-1908. https://doi.org/10.1002/jsfa.2195
Singh, T., Kumar Chatli, M., Kumar, P., Mehta, N. & Prakash Malav, O. (2015). Effect of Different Cooking Methods on the Quality Attributes of Chicken Meat Cutlets. Journal of Animal Research, 5 (3), 547-554. https://doi.org/10.5958/2277-940X.2015.00092.3
Teruel, M. D. R., Gordon, M., Linares, M. B., Garrido, M. D., Ahromrit, A. & Niranjan, K. (2015). A comparative study of the characteristics of french fries produced by deep fat frying and air frying. Journal of Food Science, 80(2), E349-E358. https://doi.org/10.1111/1750-3841.12753
Tourell, M. C. (2018). Singlet-assisted diffusion-NMR (SAD-NMR): redefining the limits when measuring tortuosity in porous media. Physical Chemistry Chemical Physics, 20(20), 13705-13713. https://doi.org/10.1039/c8cp00145f
Tian, J., Chen, S., Shi, J., Chen, J., Liu, D., Cai, Y. & Ye, X. (2017). Microstructure and digestibility of potato strips produced by conventional frying and air-frying: An in vitro study. Food structure, 14, 30-35. https://doi.org/10.1016/j.foostr.2017.06.001
Yasai Mehrjardi, P., Ghayathi Tarzi, B., Basiri, A.L., Bamni Moghadam, M. & Esfandiari, G. (2011). Determining the optimal conditions for the process of frying pumpkin under vacuum (Cucurbita moschata Duch). Innovation in food science and technology, 3 (3), 61-69.
Yu, Y., Wang, G., Yin, X., Ge, C. & Liao, G. (2021). Effects of different cooking methods on free fatty acid profile, water-soluble compounds and flavor compounds in Chinese Piao chicken meat. Food Research International, 149, 110696. https://doi.org/10.1016/j.foodres.2021.110696.
Yu, X. (2020). Effect of air-frying conditions on the quality attributes and lipidomic characteristics of surimi during processing. Innovative food science & emerging technologies, 60, 102305. https://doi.org/10.1016/j.ifset.2020.102305
Zaghi, A. N., Barbalho, S.M., Guiguer, E.L. & Otoboni, A.M. (2019). Frying Process: From Conventional to Air Frying Technology, Food Reviews International, https://doi.org/ 10.1080/87559129.2019.1600541.
Zhou, M., S, G., Deng, Y., Wang, C., Qiao, Y., Xiong, G., Wang, L., Wu, W., Shi, L. & Ding, A. (2022). Study on the physicochemical and flavor characteristics of air frying and deep frying shrimp (crayfish) meat. Frontiers in Nutrition, 9, 1022590. https://doi.org/10.3389/fnut.2022.1022590